Towards ‘Lean Industry 4.0ʹ – Current trends and future perspectives

References

• Ahmad, R., Masse, C., Jituri, S., Doucette, J., & Mertiny, P. (2018). Alberta learning factory for training reconfigurable assembly process value stream mapping. Procedia Manufacturing, 23, 237–32. https://doi.org/10.1016/j.promfg.2018.04.023
   Google Scholar
• Araújo, A. F., Varela, M. L. R., Gomes, M. S., Barreto, R. C. C., & Trojanowska, J. (2018). Development of an intelligent and automated system for lean industrial production, adding maximum productivity and efficiency in the production process. In A. Hamrol, O. Ciszak, S. Legutko, & M. Jurczyk (Eds.), Advances in manufacturing. lecture notes in mechanical engineering (pp. 131–140). Springer. https://doi.org/10.1007/978-3-319-68619-6_13
   Google Scholar
• Arica, E., & Powell, D. J. (2014). A framework for ICT-enabled real-time production planning and control. Advances in Manufacturing, 2(2), 158–164. https://doi.org/10.1007/s40436-014-0070-5
   Web of Science ®Google Scholar
• Basios, A., & Loucopoulos, P. (2017). Six Sigma DMAIC enhanced with capability modelling. IEEE 19th conference on business informatics (pp. 55–62). https://doi.org/10.1109/CBI.2017.70
   Google Scholar
• Beruvides, G., Quiza, R., Del Toro, R., & Haber, R. E. (2013). Sensoring systems and signal analysis to monitor tool wear in microdrilling operations on a sintered tungsten-copper composite material. Sensors and Actuators. A, Physical, 199, 165–175. https://doi.org/10.1016/j.sna.2013.05.021
   Web of Science ®Google Scholar
• Beruvides, G., Quiza, R., & Haber, R. E. (2016). Multi-objective optimization based on an improved cross-entropy method. A case study of a micro-scale manufacturing process. Information Sciences, 334–335, 161–173. https://doi.org/10.1016/j.ins.2015.11.040
   Web of Science ®Google Scholar
• Bicheno, J., & Holweg, M. (2009). The lean toolbox. PICSIE Books.
   Google Scholar
• Bloechl, S. J., & Schneider, M. (2016). Simulation game for intelligent production logistics – The PuLL (R) learning factory. Procedia CIRP, 54, 130–135. https://doi.org/10.1016/j.procir.2016.04.100
   Google Scholar
• Bonilla, S. H., Silva, H. R. O., da Silva, M. T., Gonçalves, R. F., & Sacomano, J. B. (2018). Industry 4.0 and sustainability implications: A scenario-based analysis of the impacts and challenges. Sustainability, 10(10), 3740. https://doi.org/10.3390/su10103740
   Web of Science ®Google Scholar
• Buer, S.-V., Fragapane, G. I., & Strandhagen, J. O. (2018). The data-driven process improvement cycle: Using digitalization for continuous improvement. IFAC-PapersOnLine, 51(11), 1035–1040. https://doi.org/10.1016/j.ifacol.2018.08.471
   Google Scholar
• Buer, S.-V., Strandhagen, J. O., & Chan, F. T. S. (2018). The link between Industry 4.0 and lean manufacturing: Mapping current research and establishing a research agenda. International Journal of Production Research, 56(8), 2924–2940. https://doi.org/10.1080/00207543.2018.1442945
   Web of Science ®Google Scholar
• Carvalho, N., Chaim, O., Cazarini, E., & Gerolamo, M. (2018). Manufacturing in the fourth industrial revolution: A positive prospect in sustainable manufacturing. Procedia Manufacturing, 21, 671–678. https://doi.org/10.1016/j.promfg.2018.02.170
   Google Scholar
• Castaño, F., Beruvides, G., Haber, R. E., & Artuñedo, A. (2017). Obstacle recognition based on machine learning for on-chip LiDAR sensors in a cyber-physical system. Sensors, 17(9), 2109. https://doi.org/10.3390/s17092109
   Web of Science ®Google Scholar
• Cattaneo, L., Rossi, M., Negri, E., Powell, D., & Terzi, S. (2017). Lean thinking in the digital era. In J. Rios, A. Bernard, A. Bouras, & S. Foufou (Eds.), Product lifecycle management and the industry of the future – PLM 2017 (pp. 371–381). Springer. https://doi.org/10.1007/978-3-319-72905-3_33
   Google Scholar
• Chen, C. (2004). Searching for intellectual turning points: Progressive knowledge domain visualization. Proceedings of the National Academy of Sciences of the United States of America (PNAS), 101(Suppl. 1), 5303–5310. https://doi.org/10.1073/pnas.0307513100
   PubMed Web of Science ®Google Scholar
• Chen, C. (2006). CiteSpace II: Detecting and visualizing emerging trends and transient patterns in scientific literature. Journal of the American Society for Information Science and Technology, 57(3), 359–377. https://doi.org/10.1002/asi.20317
   Web of Science ®Google Scholar
• Chiarini, A. (2011). Integrating lean thinking into ISO 9001: A first guideline. International Journal of Lean Six Sigma, 2(2), 96–117. https://doi.org/10.1108/20401461111135000
   Google Scholar
• Chroneer, D., & Wallstrom, P. (2016). Exploring waste and value in a lean context. International Journal of Business & Management, 11(10), 282–297. https://doi.org/10.5539/ijbm.v11n10p282
   Google Scholar
• Chryssolouris, G., Mavrikios, D., & Rentzos, L. (2016). The teaching factory: A manufacturing education paradigm. Procedia CIRP, 57, 44–48. https://doi.org/10.1016/j.procir.2016.11.009
   Google Scholar
• Chukwuekwe, D., Schjølberg, P., Rødseth, H., & Stuber, A. (2016). Reliable, robust and resilient systems: Towards development of a predictive maintenance concept within the Industry 4.0 environment. Proceedings of the concept within the Industry 4.0 environment, euromaintenance, 30 May–1 June.
   Google Scholar
• Ciano, M. P., Pozzi, R., Rossi, T., & Strozzi, F. (2019). How IJPR has addressed ‘lean’: A literature review using bibliometric tools. International Journal of Production Research, 57(15–16), 5284–5317. https://doi.org/10.1080/00207543.2019.1566667
   Web of Science ®Google Scholar
• Colicchia, C., Strozzi, F., & Wilding, R. (2012). Supply chain risk management: A new methodology for a systematic literature review. Supply Chain Management: An International Journal, 17(4), 403–418. https://doi.org/10.1108/13598541211246558
   Web of Science ®Google Scholar
• Constantinescu, C. L., Francalanza, E., Matarazzo, D., & Balkan, O. (2014). Information support and interactive planning in the digital factory: Approach and industry-driven evaluation. Procedia CIRP, 25, 269–275. https://doi.org/10.1016/j.procir.2014.10.038
   Google Scholar
• Crew, K., Schoenborn, M., Stemper, J., & Lilyard, C. (2016). E-Journal metrics for collection management: Exploring disciplinary usage differences in scopus and web of science. Evidence Based Library and Information Practice, 11(2), 97–120. https://doi.org/10.18438/B85P87
   Web of Science ®Google Scholar
• Dallasega, P., Rojas, R. A., Rauch, E., & Matt, D. T. (2017). Simulation based validation of supply chain effects through ICT enabled real-time-capability in ETO production planning. Procedia Manufacturing, 11, 846–853. https://doi.org/10.1016/j.promfg.2017.07.187
   Google Scholar
• Delbridge, R., & Oliver, N. (1991). Narrowing the gap? Stock turns in the Japanese and Western car industries. International Journal of Production Research, 29(10), 2083–2095. https://doi.org/10.1080/00207549108948068
   Web of Science ®Google Scholar
• Denyer, D., & Tranfield, D. (2009). Producing a systematic review. In D. Buchanan & A. Bryman (Eds.), The Sage handbook of organizational research methods (pp. 671–689). Sage Publications.
   Google Scholar
• Diez, J. V., Ordieres-Mere, J., & Nuber, G. (2015). The HOSHIN KANRI TREE. Cross-plant lean shopfloor management. Procedia CIRP, 32, 150–155. https://doi.org/10.1016/j.procir.2015.02.120
   Google Scholar
• Doh, S. W., Deschamps, F., & Pinheiro De Lima, E. (2016). Systems integration in the lean manufacturing systems value chain to meet Industry 4.0 requirements. In M. Borsato, N. Wognum, M. Peruzzini, J. Stjepandic, & W. J. C. Verhagen (Eds.), Transdisciplinary engineering: crossing boundaries 4 (pp. 642–650). IOS Press. https://doi.org/10.3233/978-1-61499-703-0-642
   Google Scholar
• Dombrowski, U., Richter, T., & Krenkel, P. (2017). Interdependencies of Industrie 4.0 & lean production systems: A use cases analysis. Procedia Manufacturing, 11, 1061–1068. https://doi.org/10.1016/j.promfg.2017.07.217
   Google Scholar
• Dombrowski, U., Wullbrandt, J., & Fochler, S. (2019). Center of excellence for Lean Enterprises 4.0. Procedia Manufacturing, 31, 66–71. https://doi.org/10.1016/j.promfg.2019.03.011
   Google Scholar
• Duarte, S., & Cruz-Machado, V. (2018). Exploring linkages between lean and green supply chain and the Industry 4.0. In M. Zhu, M. Gen, A. Hajiyev, & F. L. Cooke (Eds.), Proceedings of the eleventh international conference on management science and engineering management (pp. 1242–1252). Springer. https://doi.org/10.1007/978-3-319-59280-0_103
   Google Scholar
• Ejsmont, K., & Gladysz, B. (2020). Lean Industry 4.0 – Wastes versus technology framework. In K. Panuwatwanich & C.-H. Ko. (Eds.), 10th international conference on Engineering, Project and Production Management (EPPM 2019) (pp. 537–546). Springer. https://doi.org/10.1007/978-981-15-1910-9_44
   Google Scholar
• Fettermann, D. C., Sa Cavalcante, C. G., de Almeida, T. D., & Tortorella, G. L. (2018). How does Industry 4.0 contribute to operations management? Journal of Industrial and Production Engineering, 35(4), 255–268. https://doi.org/10.1080/21681015.2018.1462863
   Web of Science ®Google Scholar
• Gabriel, M., & Pessl, E. (2016). Industry 4.0 and sustainability impacts: Critical discussion of sustainability aspects with a special focus on future of work and ecological consequences. Annals of Faculty Engineering Hunedoara – International Journal of Engineeringis, 14(2), 131–136.
   Google Scholar
• Germany Trade & Invest (GTAI). (2014). Industry 4.0-Smart manufacturing for the future. Germany Trade and Invest. Retrieved November 19, 2019, from http://www.inovasyon.org/pdf/gtai.industrie4.0_smart.manufact.for.future.july.2014.pdf
   Google Scholar
• Gjeldum, N., Mladineo, M., & Veza, I. (2016). Transfer of model of innovative smart factory to croatian economy using lean learning factory. Procedia CIRP, 54, 158–163. https://doi.org/10.1016/j.procir.2016.06.096
   Google Scholar
• Goienetxea Uriarte, A., Ng, A. H. C., & Uredna Moris, M. (2019). Bringing together lean and simulation: A comprehensive review. International Journal of Production Research, 57(20), 1–32. https://doi.org/10.1080/00207543.2019.1643512
   Google Scholar
• Grube, D., Malik, A. A., & Bilberg, A. (2019). SMEs can touch Industry 4.0 in the smart learning factory. Procedia Manufacturing, 31, 219–224. https://doi.org/10.1016/j.promfg.2019.03.035
   Google Scholar
• Gu, F., Guo, J., Hall, P., & Gu, X. (2019). An integrated architecture for implementing extended producer responsibility in the context of Industry 4.0. International Journal of Production Research, 57(5), 1458–1477. https://doi.org/10.1080/00207543.2018.1489161
   Web of Science ®Google Scholar
• Guerra, R. H., Quiza, R., Villalonga, A., Arenas, J., & Castano, F. (2019). Digital twin-based optimization for ultraprecision motion systems with backlash and friction. IEEE Access, 7, 93462–93472. https://doi.org/10.1109/ACCESS.2019.2928141
   Web of Science ®Google Scholar
• Hasle, P., Bojesen, A., Langaa Jensen, P., & Bramming, P. (2012). Lean and the working environment: A review of the literature. International Journal of Operations & Production Management, 32(7), 829–849. https://doi.org/10.1108/01443571211250103
   Web of Science ®Google Scholar
• Hofmann, C., Staehr, T., Cohen, S., Stricker, N., Haefner, B., & Lanza, G. (2019). Augmented go & see: An approach for improved bottleneck identification in production lines. Procedia Manufacturing, 31, 148–154. https://doi.org/10.1016/j.promfg.2019.03.023
   Google Scholar
• Hofmann, E., & Ruesch, M. (2017). Industry 4.0 and the current status as well as future prospects on logistics. Computers in Industry, 89, 23–34. https://doi.org/10.1016/j.compind.2017.04.002
   Web of Science ®Google Scholar
• Holweg, M. (2007). The genealogy of lean production. Journal of Operations Management, 25(2), 420–437. https://doi.org/10.1016/j.jom.2006.04.001
   Web of Science ®Google Scholar
• Hrušecká, D., Adla, R., Krayem, S., & Pivnička, M. (2018). Event-B model for increasing the efficiency of warehouse management. Polish Journal of Management Studies, 17(2), 63–74. https://doi.org/10.17512/pjms.2018.17.2.06
   Web of Science ®Google Scholar
• Iarovyi, S., Lastra, J. L. M., Haber, R., & Del Toro, R. 2015. “From artificial cognitive systems and open architectures to cognitive manufacturing systems.” 2015 IEEE 13th International Conference on Industrial Informatics (INDIN) (pp. 1225–1232). https://doi.org/10.1109/INDIN.2015.7281910
   Google Scholar
• Jahangirian, M., Eldabi, T., Naseer, A., Stergioulas, L. K., & Young, T. (2010). Simulation in manufacturing and business: A review. European Journal of Operational Research, 203(1), 1–13. https://doi.org/10.1016/j.ejor.2009.06.004
   Web of Science ®Google Scholar
• Jain, S., Lechevalier, D., Woo, J., & Shin, S. J. 2016. “Towards a virtual factory prototype.” Winter simulation conference – WSC 2015. https://doi.org/10.1109/WSC.2015.7408333
   Google Scholar
• Jain, S., Shao, G., & Shin, S. J. 2016. “Virtual factory based data analytics.” 12th IEEE international conference on control and automation – ICCA 2016. https://doi.org/10.1109/ICCA.2016.7505298
   Google Scholar
• Jasti, N. V. K., & Kodali, R. (2015). Lean production: Literature review and trends. International Journal of Production Research, 53(3), 867–885. https://doi.org/10.1080/00207543.2014.937508
   Web of Science ®Google Scholar
• Kagermann, H., Lukas, W., & Wahlster, W. (2011). Industrie 4.0 – Mitdem Internet er Dinge auf dem Wegzur 4. Industriellen Revolution [Industry 4.0: With the Internet of Things towards 4th industrial revolution]. VDI nachrichten, nr 13-2011. Retrieved May 25, 2020, from https://www.dfki.de/fileadmin/user_upload/DFKI/Medien/News_Media/Presse/Presse-Highlights/vdinach2011a13-ind4.0-Internet-Dinge.pdf
   Google Scholar
• Kagermann, H., Wahlster, W., & Helbig, J. (2013). Recommendations for implementing the strategic initiative Industrie 4.0: Final report of the Industrie 4.0 Working Group. National Academy of Science and Engineering. Retrieved November 9, 2019, from https://www.din.de/blob/76902/e8cac883f42bf28536e7e8165993f1fd/recommendations-for-implementing-industry-4-0-data.pdf
   Google Scholar
• Kajikawa, Y., Ohno, J., Takeda, Y., Matsushima, K., & Komiyama, H. (2007). Creating an academic landscape of sustainability science: An analysis of the citation network. Sustainability Science, 2(2), 221–231. https://doi.org/10.1007/s11625-007-0027-8
   Web of Science ®Google Scholar
• Kamble, S. S., Gunasekaran, A., & Dhone, N. C. (2019). Industry 4.0 and lean manufacturing practices for sustainable organisational performance in Indian manufacturing companies. International Journal of Production Research, 57(20), 1–19. https://doi.org/10.1080/00207543.2019.1630772
   Google Scholar
• Kamble, S. S., Gunasekaran, A., & Gawankar, S. A. (2018). Sustainable Industry 4.0 framework: A systematic literature review identifying the current trends and future perspectives. Process Safety and Environmental Protection, 117, 408–425. https://doi.org/10.1016/j.psep.2018.05.009
   Web of Science ®Google Scholar
• Kamble, S. S., Gunasekaran, A., & Sharma, R. (2018). Analysis of the driving and dependence power of barriers to adopt Industry 4.0 in Indian manufacturing industry. Computers in Industry, 101, 107–119. https://doi.org/10.1016/j.compind.2018.06.004
   Web of Science ®Google Scholar
• Kang, H. S., Lee, J. Y., Choi, S., Kim, H., Park, J. H., Son, J. Y., Kim, B. H., & Noh, S. D. (2016). Smart manufacturing: Past research, present findings, and future directions. International Journal of Precision Engineering and Manufacturing-Green Technology, 3(1), 111–128. https://doi.org/10.1007/s40684-016-0015-5
   Web of Science ®Google Scholar
• Karre, H., Hammer, M., Kleindienst, M., & Ramsauer, C. (2017). Transition towards an Industry 4.0 state of the LeanLab at Graz University of technology. Procedia Manufacturing, 9, 206–213. https://doi.org/10.1016/j.promfg.2017.04.006
   Google Scholar
• Kaspar, S., & Schneider, M. (2015). Lean und Industrie 4.0 in Der Intralogistik: Effizienzsteigerung Durch Kombination Der Beiden Ansätze [Lean and Industry 4.0 in the field of intra logistics. Efficiency improvement by combination of the two approaches]. ProductivITy - Kompetenz in Produktion und Logistik, 20(5), 17–20. https://www.industrie-management.de/sites/industrie-management.de/files/sonderdrucke/kaspar-Lean-und-Industrie-40in-der-Intralogistik_productivity_15-5.pdf
   Google Scholar
• Kaufmann, T. (2015). Geschäftsmodelle in Industrie 4.0 und dem Internet der Dinge: Der Weg vom Anspruch in die Wirklichkeit [Business models in Industry 4.0 and the Internet of Things: The path from aspiration to reality]. Springer. https://doi.org/10.1007/978-3-658-10272-2
   Google Scholar
• Kikolski, M. (2017). Study of production scenarios with the use of simulation models. Procedia Engineering, 182, 321–328. https://doi.org/10.1016/j.proeng.2017.03.102
   Google Scholar
• Kim, S., Colicchia, C., & Menachof, D. (2018). Ethical sourcing: An analysis of the literature and implications for future research. Journal of Business Ethics, 152(4), 1033–1052. https://doi.org/10.1007/s10551-016-3266-8
   Web of Science ®Google Scholar
• Kleinberg, J. (2003). Burst and hierarchical structure in streams. Data Mining and Knowledge Discovery, 7(4), 373–397. https://doi.org/10.1023/A:1024940629314
   Web of Science ®Google Scholar
• Knoke, D., & Yang, S. (2008). Social network analysis. Sage.
   Google Scholar
• Kolberg, D., Knobloch, J., & Zuehlke, D. (2017). Towards a lean automation interface for workstations. International Journal of Production Research, 55(10), 2845–2856. https://doi.org/10.1080/00207543.2016.1223384
   Web of Science ®Google Scholar
• Kolberg, D., & Zuehlke, D. (2015). Lean automation enabled by Industry 4.0 technologies. IFAC-PapersOnLine, 48(3), 1870–1875. https://doi.org/10.1016/j.ifacol.2015.06.359
   Google Scholar
• Krafcik, J. F. (1988). Triumph of the lean production system. Sloan Management Review, 30(1), 41–52.
   Web of Science ®Google Scholar
• Kumar, S., Suhaib, M., & Asjad, M. (2020). Industry 4.0: Complex, disruptive, but inevitable. Management and Production Engineering Review, 11(1), 43–51. https://doi.org/10.24425/mper.2020.132942
   Web of Science ®Google Scholar
• Kusiak, A. (2018). Smart manufacturing. International Journal of Production Research, 56(1–2), 508–517. https://doi.org/10.1080/00207543.2017.1351644
   Web of Science ®Google Scholar
• Küsters, D., Praß, N., & Gloy, Y.-S. (2017). Textile Learning Factory 4.0 – Preparing Germany’s Textile industry for the digital future. Procedia Manufacturing, 9, 214–221. https://doi.org/10.1016/j.promfg.2017.04.035
   Google Scholar
• La Fe-Perdomo, I., Beruvides, G., Quiza, R., Haber, R., & Rivas, M. (2019). Automatic selection of optimal parameters based on simple soft-computing methods: A case study of micromilling processes. IEEE Transactions on Industrial Informatics, 15(2), 800–811. https://doi.org/10.1109/TII.2018.2816971
   Web of Science ®Google Scholar
• Levy, Y., & Ellis, T. J. (2006). A systems approach to conduct an effective literature review in support of information systems research. Informing Science: The International Journal of an Emerging Transdiscipline, 9, 181–212. https://doi.org/10.28945/479
   Google Scholar
• Leyh, C., Martin, S., & Schäffer, T. (2017). Industry 4.0 and lean production – A matching relationship? An analysis of selected Industry 4.0 models. Proceedings of the federated conference on computer science and information systems. ACSIS (Vol. 11, pp. 989–993). https://doi.org/10.15439/2017F365
   Google Scholar
• Liker, J. K. (2004). The Toyota Way: 14 management principles from the world’s greatest manufacturer. McGraw-Hill.
   Google Scholar
• Lin, D., Lee, C. K. M., Lau, H., & Yang, Y. (2018). Strategic response to Industry 4.0: An empirical investigation on the Chinese automotive industry. Industrial Management & Data Systems, 118(3), 589–605. https://doi.org/10.1108/IMDS-09-2017-0403
   Web of Science ®Google Scholar
• Lugert, A., Batz, A., & Winkler, H. (2018). Empirical assessment of the future adequacy of value stream mapping in manufacturing industries. Journal of Manufacturing Technology Management, 29(5), 886–906. https://doi.org/10.1108/JMTM-11–2017-0236
   Web of Science ®Google Scholar
• Luthra, S., & Mangla, S. K. (2018). Evaluating challenges to Industry 4.0 initiatives for supply chain sustainability in emerging economies. Process Safety and Environmental Protection, 117, 168–179. https://doi.org/10.1016/j.psep.2018.04.018
   Web of Science ®Google Scholar
• Ma, J., Wang, Q., & Zhao, Z. (2017). SLAE–CPS: Smart lean automation engine enabled by cyber-physical systems technologies. Sensors, 17(7), 1500. https://doi.org/10.3390/s17071500
   PubMed Web of Science ®Google Scholar
• Martínez-Jurado, P. J., & Moyano-Fuentes, J. (2014). Lean management, supply chain management and sustainability: A literature review. Journal of Cleaner Production, 85, 134–150. https://doi.org/10.1016/j.jclepro.2013.09.042
   Web of Science ®Google Scholar
• Mayr, A., Weigelt, M., Kühl, A., Grimm, S., Erll, A., Potzel, M., & Franke, J. (2018). Lean 4.0 - A conceptual conjunction of lean management and Industry 4.0. Procedia CIRP, 72, 622–628. https://doi.org/10.1016/j.procir.2018.03.292
   Google Scholar
• Moeuf, A., Pellerin, R., Lamouri, S., Tamayo-Giraldo, S., & Barbaray, R. (2017). The industrial management of SMEs in the Era of Industry 4.0. International Journal of Production Research, 56(3), 1–19. https://doi.org/10.1080/00207543.2017.1372647
   Web of Science ®Google Scholar
• Mourtzis, D., Fotia, S., & Vlachou, E. (2017). Lean rules extraction methodology for lean PSS design via key performance indicators monitoring. Journal of Manufacturing Systems, 42, 223–233. https://doi.org/10.1016/j.jmsy.2016.12.014
   Web of Science ®Google Scholar
• Mrugalska, B., & Wyrwicka, M. K. (2017). Towards lean production in Industry 4.0. Procedia Engineering, 182, 466–473. https://doi.org/10.1016/j.proeng.2017.03.135
   Google Scholar
• Negahban, A., & Smith, J. S. (2014). Simulation for manufacturing system design and operation: Literature review and analysis. Journal of Manufacturing Systems, 33(2), 241–261. https://doi.org/10.1016/j.jmsy.2013.12.007
   Web of Science ®Google Scholar
• Nyhuis, P., Hübner, M., Quirico, M., Schäfers, P., & Schmidt, M. (2017). Veränderung in der Produktionsplanung und –steuerung [Change in production planning and control]. In G. Reinhart (Ed.), Handbuch Industrie 4.0: Geschäftsmodelle, Prozesse, Technik [Handbook Industry 4.0: Business models, processes, technology] (pp. 31–50). Hanser. https://doi.org/10.3139/9783446449893.002
   Google Scholar
• Odważny, F., Wojtkowiak, D., Cyplik, P., & Adamczak, M. (2018). Smart factory within sustainable development and green growth concepts. LogForum, 14(4), 467–477. https://doi.org/10.17270/J.LOG.2018.301
   Web of Science ®Google Scholar
• Ohno, T. (1988). Toyota production system: Beyond large-scale production. CRC Press.
   Google Scholar
• Oztemel, E., & Gursev, S. (2018). Literature review of Industry 4.0 and related technologies. Journal of Intelligent Manufacturing, 31, 127-182. https://doi.org/10.1007/s10845-018-1433-8
   PubMed Web of Science ®Google Scholar
• Pereira, A. C., Dinis-Carvalho, J., Alves, A. C., & Arezes, P. (2019). How Industry 4.0 can enhance lean practices. FME Transactions, 47(4), 810–822. https://doi.org/10.5937/fmet1904810P
   Web of Science ®Google Scholar
• Porter, M. E., & Heppelmann, J. E. (2014). How smart, connected products are transforming competition. Harvard Business Review, 92(11), 64–88. https://hbr.org/2014/11/how-smart-connected-products-are-transforming-competition
   Web of Science ®Google Scholar
• Porter, M. E., & Heppelmann, J. E. (2015). How smart, connected products are transforming companies. Harvard Business Review, 93(10), 97–114. https://hbr.org/2015/10/how-smart-connected-products-are-transforming-companies
   Web of Science ®Google Scholar
• Powell, K., & Peterson, S. R. (2017). Coverage and quality: A comparison of web of science and scopus databases for reporting faculty nursing publication metrics. Nursing Outlook, 65(5), 572–578. https://doi.org/10.1016/j.outlook.2017.03.004
   PubMed Web of Science ®Google Scholar
• Prinz, C., Kreggenfeld, N., & Kuhlenkotter, B. (2018). Lean meets Industrie 4.0 – A practical approach to interlink the method world and cyber-physical world. Procedia Manufacturing, 23, 21–26. https://doi.org/10.1016/j.promfg.2018.03.155
   Google Scholar
• Rauch, E., Dallasega, P., & Matt, D. T. (2016). The way from Lean Product Development (LPD) to Smart Product Development (SPD). Procedia CIRP, 50, 26–31. https://doi.org/10.1016/j.procir.2016.05.081
   Google Scholar
• Rauch, E., Dallasega, P., & Matt, D. T. (2017). Critical factors for introducing lean product development to small and medium sized enterprises in Italy. Procedia CIRP, 60, 362–367. https://doi.org/10.1016/j.procir.2017.01.031
   Google Scholar
• Rauch, E., Morandell, F., & Matt, D. T. (2019). AD design guidelines for implementing I4.0 learning factories. Procedia Manufacturing, 31, 239–244. https://doi.org/10.1016/j.promfg.2019.03.038
   Google Scholar
• Reuter, C., Brambring, F., & Hempel, T. (2016). Approach of information provision for high resolution production control. Arabian Journal of Business and Management Review, S2(1), 1–9. https://www.hilarispublisher.com/abstract/approach-of-information-provision-for-high-resolution-production-control-20882.html
   Google Scholar
• Roblek, V., Mesko, M., & Krapez, A. (2016). A complex view of industry 4.0. SAGE Open, 6(2), 1–11. https://doi.org/10.1177/2158244016653987
   Web of Science ®Google Scholar
• Rossini, M., Costa, F., Tortorella, G. L., & Portioli-Staudacher, A. (2019). The interrelation between Industry 4.0 and lean production: An empirical study on European manufacturers. The International Journal of Advanced Manufacturing Technology, 102(9–12), 3963–3976. https://doi.org/10.1007/s00170-019-03441-7
   Web of Science ®Google Scholar
• Sanders, A., Elangeswaran, C., & Wulfsberg, J. (2016). Industry 4.0 implies lean manufacturing: research activities in Industry 4.0 function as enablers for lean manufacturing. JIEM, 9(3), 811–833. https://doi.org/http://dx.doi.10.3926/jiem.1940
   Google Scholar
• Sanders, A., Subramanian, K. R. K., Redlich, T., & Wulfsberg, J. P. (2017). Industry 4.0 and lean management–synergy or contradiction? In H. Lödding, R. Riedel, K.-D. Thoben, G. von Cieminski, & D. Kiritsis (Eds.), The path to intelligent, collaborative and sustainable manufacturing (pp. 341–349). Springer. https://doi.org/10.1007/978-3-319-66926-7_39
   Google Scholar
• Sarkis, J., & Zhu, Q. (2018). Environmental sustainability and production: Taking the road less travelled. International Journal of Production Research, 56(1–2), 743–759. https://doi.org/10.1080/00207543.2017.1365182
   Web of Science ®Google Scholar
• Sartal, A., & Vázquez, X. H. (2017). Implementing information technologies and operational excellence: Planning, emergence and randomness in the survival of adaptive manufacturing systems. Journal of Manufacturing Systems, 45, 1–16. https://doi.org/10.1016/j.jmsy.2017.07.007
   Web of Science ®Google Scholar
• Satoglu, S., Ustundag, A., Cevikcan, E., & Durmusoglu, M. B. (2018a). Lean production systems for Industry 4.0. In A. Ustundag & E. Cevikcan (Eds.), Industry 4.0: Managing the digital transformation (pp. 43–59). Springer. https://doi.org/10.1007/978-3-319-57870-5_3
   Google Scholar
• Satoglu, S., Ustundag, A., Cevikcan, E., & Durmusoglu, M. B. (2018b). Lean transformation integrated with Industry 4.0 implementation methodology. In F. Calisir & H. C. Agdag (Eds.), Industrial engineering in the Industry 4.0 Era (pp. 97–107). Springer. https://doi.org/10.1007/978-3-319-71225-3_9
   Google Scholar
• Schuh, G. (2013). Lean innovation. Springer. https://doi.org/10.1007/978-3-540-76915-6
   Google Scholar
• Shah, R., & Ward, P. T. (2007). Defining and developing measures of lean production. Journal of Operations Management, 25(4), 785–805. https://doi.org/10.1016/j.jom.2007.01.019
   Web of Science ®Google Scholar
• Shrouf, F., Ordieres, J., & Miragliotta, G. (2014). Smart factories in industry 4.0: A review of the concept and of energy management approached in production based on the Internet of Things paradigm. IEEE international conference on industrial engineering and engineering management (pp. 697–701). https://doi.org/10.1109/IEEM.2014.7058728
   Google Scholar
• Siderska, J. (2016). Application of tecnomatix plant simulation for modeling production and logistics processes. Business, Management and Education, 14(1), 64–73. https://doi.org/10.3846/bme.2016.316
   Google Scholar
• Slim, R., Remy, H., & Amadou, C. (2018). Convergence and contradiction between Lean and Industry 4.0 for inventive Design of smart production systems. In D. Cavallucci, R. De Guio, & S. Koziołek (Eds.), Automated invention for smart industries (pp. 141–153). Springer. https://doi.org/10.1007/978-3-030-02456-7_12
   Google Scholar
• Smart Manufacturing Leadership Coalition. (2011). Implementing 21st century smart manufacturing. Workshop Summary Report. Retrieved November 9, 2019, from https://www.controlglobal.com/assets/11WPpdf/110621_SMLC-smart-manufacturing.pdf
   Google Scholar
• Sony, M. (2018). Industry 4.0 and lean management: A proposed integration model and research propositions. International Journal of Production & Manufacturing Research, 6(1), 416–432. https://doi.org/10.1080/21693277.2018.1540949
   Web of Science ®Google Scholar
• Stadnicka, D., & Antonelli, D. (2019). Human-robot collaborative work cell implementation through lean thinking. International Journal of Computer Integrated Manufacturing, 32(6), 580–595. https://doi.org/10.1080/0951192X.2019.1599437
   Web of Science ®Google Scholar
• Staufen, A. G. (2016). Deutscher Industrie 4.0 Index 2015 [German Industry 4.0 Index 2015]. Staufen AG.
   Google Scholar
• Strozzi, F., Bono, F., & Gutierrez, E. (2014). Bibliometric and citation network analysis: Percolation and graph spectral analysis in the framework of wireless sensor network technology. EUR scientific and technical research series (pp. JRC92443).
   Google Scholar
• Strozzi, F., Colicchia, C., Creazza, A., & Noè, C. (2017). Literature review on the ‘Smart Factory’ concept using bibliometric tools. International Journal of Production Research, 55(22), 6572–6591. https://doi.org/10.1080/00207543.2017.1326643
   Web of Science ®Google Scholar
• Synnes, E. L., & Welo, T. (2016). Enhancing integrative capabilities through lean product and process development. Procedia CIRP, 54, 221–226. https://doi.org/10.1016/j.procir.2016.05.090
   Google Scholar
• Tabacaru, S. (2019). Web of science versus scopus: Journal coverage overlap analysis. Texas A&M University Libraries.
   Google Scholar
• Taj, S. (2008). Lean manufacturing performance in China: Assessment of 65 manufacturing plants. Journal of Manufacturing Technology Management, 19(2), 217–234. https://doi.org/10.1108/17410380810847927
   Google Scholar
• Thoben, K. D., M. Veigt, D. Lappe, M. Franke, M. Kück, D. Kolberg, I. Fahl, R. Zimmerling, J. Schlick, P. Stephan, P. Guth. (2014, June 4–5) Towards networking logistics resources to enable a demand-driven material supply for lean production systems – basic concept and potential of a cyber-Physical logistics system. 7th international scientific symposium on logistics (pp. 42–69).
   Google Scholar
• Tortorella, G. L., & Fettermann, D. (2018). Implementation of Industry 4.0 and lean production in Brazilian manufacturing companies. International Journal of Production Research, 56(8), 2975–2987. https://doi.org/10.1080/00207543.2017.1391420
   Web of Science ®Google Scholar
• Trebuna, P., Pekarcikova, M., & Edl, M. (2019). Digital value stream mapping using the tecnomatix plant simulation software. International Journal of Simulation Modelling, 18(1), 19–32. https://doi.org/10.2507/IJSIMM18(1)455
   Web of Science ®Google Scholar
• Tsai, W.-H. (2018). Green production planning and control for the textile industry by using mathematical programming and Industry 4.0 techniques. Energies, 11(8), 2072. https://doi.org/10.3390/en11082072
   Web of Science ®Google Scholar
• Tsai, W.-H., & Lai, S.-Y. (2018). Green production planning and control model with ABC under Industry 4.0 for the Paper Industry. Sustainability, 10(8), 2932. https://doi.org/10.3390/su10082932
   Web of Science ®Google Scholar
• Vaidya, S., Ambad, P., & Bhosle, S. (2018). Industry 4.0 – A Glimpse. Procedia Manufacturing, 20, 233–238. https://doi.org/10.1016/j.promfg.2018.02.034
   Google Scholar
• Van Eck, N. J., & Waltman, L. (2010). Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics, 84(2), 523–538. https://doi.org/10.1007/s11192-009-0146-3
   PubMed Web of Science ®Google Scholar
• Varela, L., Araújo, A., Ávila, P., Castro, H., & Putnik, G. (2019). Evaluation of the relation between lean manufacturing, Industry 4.0, and sustainability. Sustainability, 11(5), 1439. https://doi.org/10.3390/su11051439
   Web of Science ®Google Scholar
• Veza, I., Gjeldum, N., & Mladineo, M. (2015). Lean learning factory at FESB – University of Split. Procedia CIRP, 32, 132–137. https://doi.org/10.1016/j.procir.2015.02.223
   Google Scholar
• Vogel-Heuser, B., Bauernhansl, T., & Ten Hompel, M. (eds). (2017). Handbuch Industrie 4.0 Bd.4: Allgemeine Grundlagen [Handbook Industry 4.0 Bd.4: General principles]. Springer Vieweg. https://doi.org/10.1007/978-3-662-53254-6
   Google Scholar
• Wagner, T., Herrmann, C., & Thiede, S. (2017). Industry 4.0 impacts on lean production systems. Procedia CIRP, 63, 125–131. https://doi.org/10.1016/j.procir.2017.02.041
   Google Scholar
• Waltman, L., Van Eck, N. J., & Noyons, E. C. (2010). A unified approach to mapping and clustering of bibliometric networks. Journal of Informetrics, 4(4), 629–635. https://doi.org/10.1016/j.joi.2010.07.002
   Web of Science ®Google Scholar
• Wang, Q., & Waltman, L. (2016). Large-scale analysis of the accuracy of the journal classification systems of web of science and scopus. Journal of Informetrics, 10(2), 347–364. https://doi.org/10.1016/j.joi.2016.02.003
   Web of Science ®Google Scholar
• Wang, S., Wan, J., Li, D., & Zhang, C. (2016). Implementing smart factory of industrie 4.0: An outlook. International Journal of Distributed Sensor Networks, 12(1), 1–10. https://doi.org/10.1155/2016/3159805
   Web of Science ®Google Scholar
• Westkämper, E. (2006). New paradigm in manufacturing engineering: Factory life cycle. Production Engineering, 13(1), 143–146. http://publica.fraunhofer.de/documents/N-43846.html
   Google Scholar
• Westkämper, E., Spath, D., Constantinescu, C., & Lentes, J. (eds). (2013). Digitale Produktion [Digital production]. Springer. https://doi.org/10.1007/978-3-642-20259-9
   Google Scholar
• Womack, J. P., & Jones, D. T. (1996a). Beyond Toyota: How to root out waste and pursue perfection. Harvard Business Review, 74(5), 140–158. https://hbr.org/1996/09/how-to-root-out-waste-and-pursue-perfection
   Web of Science ®Google Scholar
• Womack, J. P., & Jones, D. T. (1996b). Lean thinking: Banish waste and create wealth in your corporation. Simon & Schuster.
   Google Scholar
• Womack, J. P., Jones, D. T., & Roos, D. (1990). Machine that changed the world. Rawson.
   Google Scholar
• Xu, L. D., Xu, E. L., & Li, L. (2018). Industry 4.0: State of the art and future trends. International Journal of Production Research, 56(8), 2941–2962. https://doi.org/10.1080/00207543.2018.1444806
   Web of Science ®Google Scholar
• Xu, Y., & Chen, M. (2017). An Internet of Things based framework to enhance just-in-time manufacturing. Journal of Engineering Manufacture, 232(13), 2353–2363. https://doi.org/10.1177/0954405417731467
   Google Scholar
• Yin, Y., Stecke, K. E., & Li, D. (2018). The evolution of production systems from Industry 2.0 through Industry 4.0. International Journal of Production Research, 56(1–2), 848–861. https://doi.org/10.1080/00207543.2017.1403664
   Web of Science ®Google Scholar
• Zawadzki, P., & Żywicki, K. (2016). Smart product design and production control for effective mass customization in the Industry 4.0 concept. Management and Production Engineering Review, 7(3), 105–112. https://doi.org/10.1515/mper-2016-0030
   Web of Science ®Google Scholar
• Zelbst, P. J., Green, K. W. J., Sower, V. E., & Abshire, R. D. (2014). Impact of RFID and information sharing on JIT, TQM and operational performance. Management Research Review, 37(11), 970–989. https://doi.org/10.1108/MRR-10-2014-273
   Google Scholar
• Zhang, Z., Li, X., Wang, X., & Cheng, H. (2017). Decentralized cyber-physical systems: A paradigm for cloud-based smart factory of Industry 4.0. In L. Thames & D. Schaefer (Eds.), Cybersecurity for Industry 4.0 (pp. 127–171). Springer. https://doi.org/10.1007/978-3-319-50660-9_6
   Google Scholar
• Zhao, D., & Strotmann, A. (2015). Analysis and visualization of citation networks. Synthesis Lectures on Information Concepts, Retrieval, and Services, 7(1), 1–207. https://doi.org/10.2200/S00624ED1V01Y201501ICR039
   Google Scholar
• Zhong, R. Y., Xu, X., Klotz, E., & Newman, S. T. (2017). Intelligent manufacturing in the context of Industry 4.0: A review. Engineering, 3(5), 616–630. https://doi.org/10.1016/J.ENG.2017.05.015
   Web of Science ®Google Scholar
• Zupan, H., & Herakovic, N. (2015). Production line balancing with discrete event simulation: A case study. IFAC-PapersOnLine, 48(3), 2305–2311. https://doi.org/10.1016/j.ifacol.2015.06.431
   Google Scholar