Elastic, viscoelastic and viscoplastic contributions to compliance during deformation under stress in prosthodontic temporization materials

References

• Balkenhol M, Mautner MC, Ferger P, et al. Mechanical properties of provisional crown and bridge materials: chemical-curing versus dual-curing systems. J Dent. 2008;36:15–20.
   PubMed Web of Science ®Google Scholar
• Hernandez EP, Oshida Y, Platt JA, et al. Mechanical properties of four methylmethacrylate-based resins for provisional fixed restorations. Biomed Mater Eng. 2004;14:107–122.
   PubMed Web of Science ®Google Scholar
• Ireland MF, Dixon DL, Breeding LC, et al. In vitro mechanical property comparison of four resins used for fabrication of provisional fixed restorations. J Prosthet Dent. 1998;80:158–162.
   PubMed Web of Science ®Google Scholar
• Balkenhol M, Kohler H, Orbach K, et al. Fracture toughness of cross-linked and non-cross-linked temporary crown and fixed partial denture materials. Dent Mater. 2009;25:917–928.
   PubMed Web of Science ®Google Scholar
• Gegauff AG, Pryor HG. Fracture toughness of provisional resins for fixed prosthodontics. J Prosthet Dent. 1987;58:23–29.
   PubMed Web of Science ®Google Scholar
• Gegauff AG, Wilkerson JJ. Fracture toughness testing of visible light- and chemical-initiated provisional restoration resins. Int J Prosthodont. 1995;8:62–68.
   PubMedGoogle Scholar
• Yilmaz A, Baydas S. Fracture resistance of various temporary crown materials. J Contemp Dent Pract. 2007;8:44–51.
   PubMedGoogle Scholar
• Koumjian JH, Nimmo A. Evaluation of fracture resistance of resins used for provisional restorations. J Prosthet Dent. 1990;64:654–657.
   PubMed Web of Science ®Google Scholar
• Lang R, Rosentritt M, Behr M, et al. Fracture resistance of PMMA and resin matrix composite-based interim FPD materials. Int J Prosthodont. 2003;16:381–384.
   PubMed Web of Science ®Google Scholar
• Nejatidanesh F, Momeni G, Savabi O. Flexural strength of interim resin materials for fixed prosthodontics. J Prosthodont. 2009;18:507–511.
   PubMedGoogle Scholar
• Osman YI, Owen CP. Flexural strength of provisional restorative materials. J Prosthet Dent. 1993;70:94–96.
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Behr M, Lang R, et al. Flexural properties of prosthetic provisional polymers. Eur J Prosthodont Restor Dent. 2004;12:75–79.
   PubMedGoogle Scholar
• Haselton DR, Diaz-Arnold AM, Vargas MA. Flexural strength of provisional crown and fixed partial denture resins. J Prosthet Dent. 2002;87:225–228.
   PubMed Web of Science ®Google Scholar
• Korkmaz T, Doğan A, Usanmaz A. Dynamic mechanical analysis of provisional resin materials reinforced by metal oxides. Biomed Mater Eng. 2005;15:179–188.
   PubMed Web of Science ®Google Scholar
• Kim SH, Watts DC. Degree of conversion of bis-acrylic based provisional partial denture materials. J Korean Acad Prosthodont. 2008;46:639–642.
   Google Scholar
• Mayer T. The microstructure and materials properties of provisional crown and bridge materials. Schweiz Monatsschr Zahnmed. 1995;105:1134–1141.
   PubMedGoogle Scholar
• Givens EJ Jr., Neiva G, Yaman P, et al. Marginal adaptation and color stability of four provisional materials. J Prosthodont. 2008;17:97–101.
   PubMedGoogle Scholar
• Haselton DR, Diaz-Arnold AM, Dawson DV. Color stability of provisional crown and fixed partial denture resins. J Prosthet Dent. 2005;93:70–75.
   PubMed Web of Science ®Google Scholar
• Haselton DR, Diaz-Arnold AM, Dawson DV. Effect of storage solution on surface roughness of provisional crown and fixed partial denture materials. J Prosthodont. 2004;13:227–232.
   PubMedGoogle Scholar
• Pae A, Jeong MS, Kim SH. Time-dependent deformation of polymer based provisional crown and partial denture materials. J Korean Acad Prosthodont. 2005;43:717–726.
   Google Scholar
• Vaidyanathan TK, Vaidyanathan J, Manasse M. Analysis of stress relaxation in temporization materials in dentistry. Dent Mater. 2015;31:e55–e82.
   PubMed Web of Science ®Google Scholar
• Bradley SW, Bradley WL, Puckett PM. On the variation of compliance measurements in polymeric solids. In: Peraro JS, editor. Limitations of test methods for plastics. ASTM STP 1369. West Conshohocken (PA): American Society for Testing and Materials; 2000.
   Google Scholar
• Mei MJ, Su YC, Li H, et al. Effect of heat treatment on the physical properties of provisional crowns during polymerization. Materials 2008;8:1766–1777.
   Web of Science ®Google Scholar
• Nielson L. Mechanical properties of polymers and composites. Vol 1. New York: Marcel Decker Inc.; 1974. p. 20.
   Google Scholar
• Malhotra SL, Minh L, Blanchard LP. Thermal decomposition and glass transition temperature of poly(methyl methacrylate) and poly(isobutyl methacrylate). J Macromol Sci: Part a – Chem. 1983;19:579–600.
   Web of Science ®Google Scholar