Dimensional stability of two impression materials after a 6-month storage period

References

• Rubel BS. Impression materials: a comparative review of impression materials most commonly used in restorative dentistry. Dent Clin N Am. 2007;51:629–642.
   PubMedGoogle Scholar
• Pant R, Juszczyk AS, Clark RKF, et al. Long-term dimensional stability and reproduction of surface detail of four polyvinyl siloxane duplicating materials. J Dent. 2008;36:456–461.
   PubMed Web of Science ®Google Scholar
• Kumar RN, Reddy SM, Karthigeyan S, et al. The effect of repeated immersion of gypsum cast in sodium hypochlorite and glutaraldehyde on its physical properties: an in vitro study. J Pharm Bioall Sci. 2012;4:353–357.
   Google Scholar
• Hamalian TA, Nasr E, Chidiac JJ. Impression materials in fixed prosthodontics: influence of choice on clinical procedure. J Prosthodont. 2011;20:153–160.
   PubMedGoogle Scholar
• Nassar U, Oko A, Adeeb S, et al. An in vitro study on the dimensional stability of a vinyl polyether silicone impression material over a prolonged storage period. J Prosthet Dent. 2013;109:172–178.
   PubMed Web of Science ®Google Scholar
• Sinobad T, Obradović-Djuricić K, Nikolić Z, et al. The effect of disinfectants on dimensional stability of addition and condensation silicone impressions. Vojnosanit Pregl. 2014;71:251–258.
   PubMed Web of Science ®Google Scholar
• Gonçalves FS, Popoff DAV, Castro CDL, et al. Dimensional stability of elastomeric impression materials: a critical review of the literature. Eur J Prosthodont Restor Dent. 2011;19:163–166.
   PubMedGoogle Scholar
• Anusavice KJ, Phillips RW, Shen C, et al. Phillips’ science of dental materials. 12th ed. St. Louis (Mo): Elsevier/Saunders; 2013.
   Google Scholar
• Donovan TE, Chee WWL. A review of contemporary impression materials and techniques. Dent Clin North Am. 2004;48:vi–470.
   Google Scholar
• Craig RG, Sun Z. Trends in elastomeric impression materials. Oper Dent. 1994;19:138–145.
   PubMed Web of Science ®Google Scholar
• Franco EB, da Cunha LF, Benetti AR. Effect of storage period on the accuracy of elastomeric impressions. J Appl Oral Sci. 2007;15:195–198.
   PubMed Web of Science ®Google Scholar
• Grundke K, Michel S, Knispel G, et al. Wettability of silicone and polyether impression materials: characterization by surface tension and contact angle measurements. Physicochem Eng Asp. 2008;317:598–609.
   Web of Science ®Google Scholar
• Surapaneni H, Pallavi Samantha P, Ravi Shankar Y, et al. Polyvinyl siloxanes in dentistry: an overview. Trends Biomater Artif Organs. 2013;27:115–123.
   Google Scholar
• Silva SM, Salvador MC. Effect of the disinfection technique on the linear dimensional stability of dental impression materials. J Appl Oral Sci. 2004;12:244–249.
   PubMedGoogle Scholar
• Adabo GL, Zanarotti E, Fonseca RG, et al. Effect of disinfectant agents on dimensional stability of elastomeric impression materials. J Prosthet Dent. 1999;81:621–624.
   PubMed Web of Science ®Google Scholar
• Amin WM, Al-Ali MH, Tarawneh SK, et al. Effects of disinfectants on dimensional accuracy and surface quality of impression materials and gypsum casts. J Clin Med Res. 2009;1:81–89.
   PubMedGoogle Scholar
• Rios MP, Morgano SM, Stein RS, et al. Efects of chemical disinfectant solutions on the stability and accuracy of the dental impression complex. J Prosthet Dent Thes. 1996;76:356–262.
   PubMed Web of Science ®Google Scholar
• Vasconcellos FE, Andreiuolo RF, Sabrosa CE, et al. Dimensional stability of casts obtained with polyether and addition silicone after disinfection with sodium hypochlorite and peracetic acid. Rev Bras Odontol. 2012;69:55–60.
   Google Scholar
• Abdelaziz KM, Hassan AM, Hodges JS. Reproducibility of sterilized rubber impressions. Braz Dent J. 2004;15:209–213.
   PubMedGoogle Scholar
• Thota KK, Jasthi S, Ravuri R, et al. A comparative evaluation of the dimensional stability of three different elastomeric impression materials after autoclaving – an invitro study. J Clin Diagn Res. 2014;8:48–50.
   Google Scholar
• Endo T, Finger WJ. Dimensional accuracy of a new polyether impression material. Quintessence Int. 2006;37:47–51.
   PubMed Web of Science ®Google Scholar
• Kern M, Rathmer RM, Strub JR. Three-dimensional investigation of the accuracy of impression materials after disinfection. J Prosthet Dent. 1993;70:449–456.
   PubMed Web of Science ®Google Scholar
• Langenwalter EM, Aquilino SA, Turner KA. The dimensional stability of elastomeric impression materials following disinfection. J Prosthet Dent. 1990;63:270–276.
   PubMed Web of Science ®Google Scholar
• Kronström MH, Johnson GH, Hompesch RW. Accuracy of a new ring-opening metathesis elastomeric dental impression material with spray and immersion disinfection. J Prosthet Dent. 2010;103:23–30.
   PubMed Web of Science ®Google Scholar
• Lucas MG, Arioli-Filho JN, Nogueira SS, et al. Effect of incorporation of disinfectant solutions on setting time, linear dimensional stability, and detail reproduction in dental stone casts. J Prosthodont. 2009;18:521–526.
   PubMedGoogle Scholar
• Nassar U, Chow AK. Surface detail reproduction and effect of disinfectant and long-term storage on the dimensional stability of a novel vinyl polyether silicone impression material. J Prosthodont. 2015;24:494–498.
   PubMedGoogle Scholar
• Oda Y, Matsumoto T, Sumii T. Evaluation of dimensional stability of elastomeric impression materials during disinfection. Bull Tokyo Dent Coll. 1995;36:1–7.
   PubMedGoogle Scholar
• Chia WK, Stevens L, Basford KE, et al. Dimensional change of impressions on sterilization. Aust Dent J. 1990;35:23–26.
   PubMed Web of Science ®Google Scholar
• Salem N, Combe EC. The effects of chemical sterilisation on the dimensional stability of some elastomeric impression materials. Clin Mater. 1990;6:75–82.
   PubMedGoogle Scholar
• Tullner JB, Commette JA, Moon PC. Linear dimensional changes in dental impressions after immersion in disinfectant solutions. J Prosthet Dent. 1988;60:725–728.
   PubMed Web of Science ®Google Scholar
• Thouati A, Deveaux E, Iost A, et al. Dimensional stability of seven elastomeric impression materials immersed in disinfectants. J Prosthet Dent. 1996;76:8–14.
   PubMed Web of Science ®Google Scholar
• Walker MP, Rondeau M, Petrie C, et al. Surface quality and long-term dimensional stability of current elastomeric impression materials after disinfection. J Prosthodontics. 2007;16:343–351.
   PubMedGoogle Scholar
• Pimentel L, Portugal J, Vasconcelos M, et al. Influence of temperature on the accuracy of an autoclaved addition silicone. Rev Port Estomatol Med Dentária e Cir Maxilofac. 2014;55:43–48.
   Google Scholar
• International Organization for Standardization. 4823:2000 Dentistry – Elastomeric impression materials. ISO. International Standard ISO; 2000.
   Google Scholar
• Marković D, Puškar T, Hadžistević M, et al. The dimensional stability of elastomeric dental impression materials. Contemp Mater. 2012;3:105–110.
   Google Scholar
• Martin N, Martin MV, Jedynakiewicz NM. The dimensional stability of dental impression materials following immersion in disinfecting solutions. Dent Mater. 2007;23:760–768.
   PubMed Web of Science ®Google Scholar
• Quick DC, Holtan JR, Ross GK. Use of a scanning laser three-dimensional digitizer to evaluate dimensional accuracy of dental impression materials. J Prosthet Dent. 1992;68:229–235.
   PubMed Web of Science ®Google Scholar
• Chen SY, Liang WM, Chen FN. Factors affecting the accuracy of elastometric impression materials. J Dent. 2004;32:603–609.
   PubMed Web of Science ®Google Scholar
• Walker MP, Petrie CS, Haj-Ali R, et al. Moisture effect on polyether and polyvinylsiloxane dimensional accuracy and detail reproduction. J Prosthodontics. 2005;14:158–163.
   PubMedGoogle Scholar