Influence of tool parameters on machining distortion of thin wall thin floor components

References

• Chatelain JF, Lalonde JF, Tahan AS. Effect of residual stresses embedded within work pieces on the distortion of parts after machining. Int J Mech. 2012;6(1):43–51.
   Google Scholar
• Ma K, Goetz R, Srivatsa SK. Modeling of residual stress and machining distortion in aerospace components. Indianapolis (IN): ASM Handbook, ASM; 2010.10.21236/ADA523921
   Google Scholar
• Sridhar G, Babu PR. Understanding the challenges in machining thin walled thin floored avionics components. Int J Appl Sci Eng Res. 2013;2(1):93–100. DOI:10.6088/ijaser.020100010.
   Google Scholar
• Fuh K-H, Wu C-F. A residual-stress model for the milling of aluminum alloy (2014-T6). J Mater Process Technol. 1995;51(1–4):87–105.10.1016/0924-0136(94)01355-5
   Web of Science ®Google Scholar
• Hornbach D, Prevéy P. Development of machining procedures to minimize distortion during manufacture. In: Proceedings of the 17th Heat Treating Society Conference and Exposition: Heat Treating; Metals Park (OH). Indianapolis (IN): ASM; 1998. p. 13–18.
   Google Scholar
• Cui H, Jung JY, Moon DH. The selection of machining parameters to minimize deformation caused by heat. In: Proceedings of the Fall Conference of Society of Korea Industrial and Systems Engineering; Korea; Indianapolis (IN): 2005.
   Google Scholar
• Wang ZJ, Chen WY, Zhang YD, et al. Study on the machining distortion of thin-walled part caused by redistribution of residual stress. Chin J Aeronaut. 2005;18(2):175–179. DOI:10.1016/S1000-9361(11)60325-7
   Google Scholar
• Dong HY, Ke YL. Study on machining deformation of aircraft monolithic component by FEM and experiment. Chin J Aeronaut. 2006;19(3):247–254. DOI:10.1016/S1000-9361(11)60352-X
   Google Scholar
• Denkena B, de León L. Machining induced residual stress in wrought aluminium parts. In: Proceedings of 2nd International Conference on Distortion Engineering; Bremen, Germany; 2008. p. 107–114.
   Google Scholar
• Marusich TD, Usui S, Marusich KJ, et al., editors. Intelligent robotics and applications, lecture notes in computer science. Vol. 5315. Springer, Berlin Heidelberg; 2008; p. 329–338. DOI:10.1007/978-3-540-88518-4_36
   Google Scholar
• Bi YB, Cheng QL, Dong HY, et al. Machining distortion prediction of aerospace monolithic components. J Zhejiang Univ Sci A. 2009;10(5):661–668. DOI:10.1631/jzus.A0820392
   Web of Science ®Google Scholar
• Yang Y, Wang YL. Analysis and control of machining distortion for aircraft monolithic component aided by computer. In: Information and Computing (ICIC), 2010 Third International Conference on information and computing. Vol. 3. IEEE; 2010. p. 280–283. DOI:10.1109/ICIC.2010.256
   Google Scholar
• Belgasim O, El-Axir MH. Modeling of residual stresses induced in machining aluminium magnesium alloy (Al–3 Mg). In: Proceedings of the World Congress on Engineering. Vol. 2. London, UK; 2010. p. 1268–1273.
   Google Scholar
• Izamshah RA, Mo J, Ding SL. Finite element analysis of machining thin-wall parts. Key Eng Mater. 2010;458:283–288. DOI:10.4028/www.scientific.net/KEM.458.283.
   Google Scholar
• Sim WM. Challenges of residual stress and part distortion in the civil airframe industry. Int J Microstruct Mater Prop. 2010;5(4/5):446–455.10.1504/IJMMP.2010.037621
   Google Scholar
• Sim W. Residual stress engineering in manufacture of aerospace structural parts. Filton: Airbus S.A.S; 2009.
   Google Scholar
• Chatelain JF, Lalonde JF, Tahan AS. Effect of residual stresses embedded within workpieces on the distortion of parts after machining. Int J Mech. 2012;6(1):43–51.
   Google Scholar
• Songtao W, Minli Z, Yihang F, et al. Cutting parameters optimization in machining thin- walled characteristics of aircraft engine architecture based on machining deformation. Adv Inf Sci Serv Sci. 2012;4(10):244–252. DOI:10.4156/AISS.vol4.issue10.29
   Google Scholar
• Sridhar G, Ramesh Babu P. Cutting parameter optimization for minimizing machining distortion of thin wall thin floor avionic components using Taguchi technique. Int J Mech Eng Technol. 2013;4(4):71–78.
   Google Scholar
• Jiang X, Li B, Yang J, et al. Effects of tool diameters on the residual stress and distortion induced by milling of thin-walled part. Int J Adv Manuf Technol. 2013;68(1–4):175–186. DOI:10.1007/s00170-012-4717-8
   Web of Science ®Google Scholar
• lzamshah R, Yuhazri MY, Hadzley M, et al. Effects of end mill helix angle on accuracy for machining thin-rib aerospace component. Appl Mech Mater. 2013;315:773–777. DOI:10.4028/www.scientific.net/AMM.315.773
   Google Scholar
• Tang ZT, Yu T, Xu LQ, et al. Machining deformation prediction for frame components considering multifactor coupling effects. Int J Adv Manuf Technol. 2013 Sep 1;68(1–4):187–196.10.1007/s00170-012-4718-7
   Web of Science ®Google Scholar
• Sridhar G, Ramesh Babu P. Volume of material removal on distortion in machining thin wall thin floor components. Int J Mech Eng Appl. 2015;3(5):86–93. DOI:10.11648/j.ijmea.20150305.12
   Google Scholar
• Sridhar G, Ramesh Babu P. Effect of a milling cutter diameter on distortion due to the machining of thin wall thin floor components. Adv Prod Eng Manage. 2015;10(3):140–152.10.14743/apem2015.3.198
   Web of Science ®Google Scholar
• D’Alvise L, Chantzis D, Schoinochoritis B, et al. Modelling of part distortion due to residual stresses relaxation: an aeronautical case study. Procedia CIRP. 2015;31:447–452.10.1016/j.procir.2015.03.069
   Google Scholar
• Ning, F, Ming C, Peiquan G. Simulation of cutting tool geometry parameters impact on residual stress. In: Control and Decision Conference, 2009. CCDC’09. Chinese. IEEE; 2009 June. p. 5472–5475.
   Google Scholar
• Huang X, Sun J, Li J. Experimental investigation of the effect of tool geometry on residual stresses in high speed milling 7050-T7451 aluminium alloy. Int J Surf Sci Eng. 2015;9(4):359–369.10.1504/IJSURFSE.2015.070813
   Web of Science ®Google Scholar
• Ku HS, Chia WC. Design of multi-purpose carbide end mill. Inst Eng, Malaysia. J. 2006;67(2):34–40.
   Google Scholar
• Mathews PG. Design of experiments with MINITAB. Indianapolis (IN): ASQ Quality Press; 2005.
   Google Scholar
• Davis JR. Metals handbook desk edition 2nd edition. Indianapolis (IN): ASM international; 1998.
   Google Scholar