Advanced search
Publication Cover
Advances in Materials and Processing Technologies Volume 4, 2018 - Issue 3
Submit an article Journal homepage
35
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Study on production of flocculating nanofiber and its application for ultra-precision abrasive machining

Wei WuOrganization for Research Initiatives and Development, Doshisha University, Kyoto, JapanCorrespondence[email protected]
,
Lei MaSchool of Science and Engineering, Doshisha University, Kyoto, Japan;Department of Mechanical Engineering, Doshisha University, Kyoto, JapanORCID Iconhttp://orcid.org/0000-0002-8086-6749
ORCID Icon,
Eiichi AoyamaSchool of Science and Engineering, Doshisha University, Kyoto, Japan
,
Toshiki HirogakiSchool of Science and Engineering, Doshisha University, Kyoto, Japan
,
Morihiko IkegayaM-TEchX Inc., Kanagawa, Japan
,
Takatsugu EchizenyaM-TEchX Inc., Kanagawa, Japan
&
Hiroyoshi SotaM-TEchX Inc., Kanagawa, Japan
 show all
Pages 416-430 | Accepted 11 Mar 2018, Published online: 20 Mar 2018

References

  • Zhang X, Lu Y. Centrifugal spinning: an alternative approach to fabricate nanofibers at high speed and low cost. J Polym Rev. 2014;54:677.10.1080/15583724.2014.935858
  • Zhmayev E, Cho D, Joo YL. Nanofibers from gas-assisted polymer melt electrospinning. J Polym. 2010;51:4140.10.1016/j.polymer.2010.06.058
  • Hu Y, Huang ZM. Numerical study on two-phase flow patterns in coaxial electrospinning. J Appl Phys. 2007;101:084307.10.1063/1.2717605
  • Matsumoto M, Yoshida K. Study on melt-blowing process for coal-tar pitch. J TANSO. 1993;57:75.10.7209/tanso.1993.75
  • Matsubara M, Yusuke T, Hiroki O, et al. Fiberization of ceramics using melt-blowing method. J JSME. 2008;74:74.10.1299/kikaib.74.74
  • Rao RS, Shambaugh RL. Vibration and stability in the melt blowing process. J Ind Eng Chem Res. 1993;32:3100.10.1021/ie00024a020
  • Ha CT, Park WG, Jung CM. Numerical simulations of compressible flows using multi-fluid models. Int J Multiphase Flow. 2015;74:5.10.1016/j.ijmultiphaseflow.2015.03.022
  • Xie S, Zeng Y. Online measurement of fiber whipping in the melt-blowing process. J Comput Fluids. 2012;54:67.
  • Ambroso A, Chalonsb C, Raviart PA. A Godunov-type method for the seven-equation model of compressible two-phase flow. J Ind Eng Chem Res. 2013;52:2116.
  • Liang S, Liu W, Yuan L. Solving seven-equation model for compressible two-phase flow using multiple GPUs. J Comput Fluids. 2014;99:156.10.1016/j.compfluid.2014.04.021
  • Tan DH, Zhou C, Ellison CJ, et al. Influence of viscosity and elasticity on diameter distribution. J Non-Newtonian Fluid Mech. 2010;165:892.10.1016/j.jnnfm.2010.04.012
  • Kurata S, Iyozumi T, Aizawa N. Comparison of oil sorbent/vial kit for sampling and preservation of liquid volatile petroleum. J Jpn Pet Inst. 2010;53(6):359.10.1627/jpi.53.359
  • Masami O, Kazutaka K, Hiroaki M, et al. Evaluation of kerosene absorbing ability for peat moss using a column test. J IDRE. 2012;277:1. ( in Japanese).
  • Sakamoto S, Kazuyuki S, Nobuaki M, et al. Experimental studies on sound absorbing materials by using bundle of narrow clearances between two planes. J JSME. 2013;79(807):4141 (in Japanese).10.1299/kikaic.79.4141
  • Kurahashi N, Kimura T. Sound absorption property of porous sound absorbent formed by using cotton flies. J Text Eng. 2010;56(5):147 (in Japanese).10.4188/jte.56.147
  • Erman B, Flory PJ. Critical phenomena and transitions in swollen polymer networks and in linear macromolecules. Macromolecules. 1986;19:2342.
  • Flory PJ. Introductory lecture. Faraday Discuss Chem Soc. 1974;57:7.
  • Ma L, Wu W, Tatsuya F, et al. Investigation of contact and abrasive phenomena between endmill type tool and workpiece in magnetic polishing. Proceeding of ACMFM2014. 2014;563.
  • Ma L, Furuki T, Kure T, et al. Development of polishing tool capable of self-adaptive to processing site using steel balls and magnetic force. J Periodical Adv Mater Res. 2015;806:466.10.4028/www.scientific.net/AMR.1136
  • Salvador FJ, Romero JV, Roselló MD, et al. Numerical simulation of primary atomization in diesel spray at low injection pressure. J Comput Appl Math. 2016;291:94.10.1016/j.cam.2015.03.044

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.