References
- Leyens C, Peters M. Titanium and titanium alloys fundamentals and applications. Germany: WILEY-VCH Verlag GmbH & Co; 2003.
- Froes F. Titanium physical metallurgy, processing and applications. Materials Park, Ohio: ASM International; 2015.
- Adamus J, Lacki P. Forming of the titanium elements by bending. Comput Mater Sci. 2011;50:1305–1309.
- Badr OM, Rolfe B, Hodgson P, et al. Forming of high strength titanium sheet at room temperature. Mater Des. 2015;66:618–626.
- Ramadass R, Sambasivam S, Thangavelu K. Selection of optimal parameters in V bending of Ti Grade 2 sheet to minimize spring back. Braz Soc Mech Sci Eng. 2019;41:1–11.
- Thipprakmas S, Phanitwong W. Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique. Mater Des. 2011;32:4430–4436.
- Chan W, Chew H, Lee H, et al. Finite element analysis of spring-back of V-bending sheet metal forming processes. J Mater Process Technol. 2004;148:15–24.
- Chen CC. Experimental study on punch radius and grain size effects in V-bending process. Mater Manuf Process. 2014;29:461–465.
- Karaagac I. The experimental investigation of spring back in V-bending using the flex forming process. Arab J Sci Eng. 2016;42:1853–1864.
- Montgomery DC. Design and analysis of experiments. New York: John Wiley and sons; 2017.
- Dieter GE. Mechanical Metallurgy. New Delhi: McGraw Hill; 2013.
- Boyer R, Welsch G, Collings E. Materials properties handbook: titanium alloys. Materials Park, Ohio: ASM international; 1994.
- Ozturk F, Ece RE, Polat N, et al. Effect of warm temperature on spring back compensation of Titanium sheet. Mater Manuf Process. 2010;25:1021–1024.
- Odenberger EL, Oldenburg M, Thilderkvist P, et al. Tool development based on modelling and simulation of hot sheet metal forming of Ti–6Al–4V titanium alloy. J Mater Process Technol. 2011;211:1324–1335.
- Shong Z, Ling Z, Peklenik J. A study of the hot sizing and high temperature mechanical behaviour for titanium alloy sheet. CIRP Ann Manuf Technol. 1983;32:161–165.
- Zong Y, Liu P, Guo B, et al. Spring back evaluation in hot V-bending of Ti-6Al-4V alloy sheets. Int J Adv Manuf Technol. 2015;76:577–585.
- Liu P, Zhang T, Guo B, et al. Deformation path and spring back behaviour in double-curved bending at high temperature. J Mech Sci Technol. 2019;9:4361–4370.
- Gupta AK. Predictive modelling of turning operations using response surface methodology, artificial neural networks and support vector regression. Int J Prod Res. 2010;48:763–778.
- Alvarez M, Ilzarbe L, Viles E, et al. The use of genetic algorithms in response surface methodology. Qual Technol Quant Manage. 2009;6:295–307.
- Sousa L, Castro C, Antonio C. Optimal design of V and U bending processes using genetic algorithms. J Mater Process Technol. 2006;172:35–41.
- Wiebenga J, Van den Boogaard A, Klaseboer G. Sequential robust optimization of a V-bending process using numerical simulations. Struct Multi Optim. 2012;46:137–153.
- Teimouri R, Baseri H, Rahmani B, et al. Modelling and optimization of spring-back in bending process using multiple regression analysis and neural computation. Int J Mater Forming. 2014;7:167–178.
- Banabic D. Sheet metal forming processes. London: Springer - Verlag Berlin Heidelberg; 2010.
- Bhargava M, Kumar S, Bhatt A, et al. Experimental and simulation studies on bending behaviour of a profile tube. Adv Mater Process Technol. 2018;5:141–152.
- Kotkunde N, Gupta AK, Singh SK. Formability study of Ti-6Al-4V alloy under warm conditions. Adv Mater Process Technol. 2015;1:210–222.