References
- Kurata Y. Evaluation of EPDM rubber for high voltage insulators. IEEE Conf Electr Insul Dielectr Phenomena (CEIDP). 1995;471–474.DOI: https://doi.org/10.1109/CEIDP.1995.483765
- Li W, Huang YD, Ahmadi SJ. Preparation and properties of ethylene propylene–diene rubber/organo montmorillonite nanocomposites. J Appl Polym Sci. 2004;94:440–445.
- Ahmadi SJ, Huang Y, Li W. Fabrication and physical properties of EPDM-organoclay nanocomposites. Compos Sci Technol. 2005;65:1069–1076.
- Bazli L, Khavandi A, Boutorabi MA, et al. Correlation between viscoelastic behavior and morphology ofnanocomposites based on SR/EPDM blends compatibilized by maleicanhydride. Polymer. 2017;113:156–166.
- Pasbakhsh P, Ismail H, Ahmad Fauzi MN, et al. Influence of maleic anhydride grafted ethylene propylene diene monomer (MAH-g-EPDM) on the properties of EPDM nanocomposites reinforced by halloysite nanotubes. Polym Test. 2009;28:548–559.
- Raja Prabu R, Usa S, Udayakumar K, et al. Electrical insulation characteristics of silicone and EPDM polymeric blends – part I. IEEE Trans Dielectr Electr Insul. 2007;14:1207–1214.
- Vijayalekshmi V. Dielectric properties of compatibilised EPDM/silicone rubber nanocomposites. Int J Eng Res Appl. 2017;7:54–61.
- Intanoo P, Sirivat A, Kunanuruksapong R, et al. Electromechanical properties of ethylenepropylene diene elastomers: effect of ethylene norbornene content. Mater Sci Appl. 2011;2:307–313.
- Vijayalekshmi V, Abdul Majeed SSM. Mechanical, thermal and electrical properties of EPDM/silicone blend nanocomposites. Int J Eng Res Appli. 2013;3:1177–1180.
- Naresh K, Shankar K, Velmurugan R. Digital image processing and thermo-mechanical response of neat epoxy and different laminate orientations of fiber reinforced polymer composites for vibration isolation applications. IJPAC. 2018;23:684–709.
- Vasudevan A, Senthil Kumaran S, Naresh K, et al. Experimental and analytical investigation of thermo-mechanical responses of pure epoxy and carbon/Kevlar/S-glass/E-glass/epoxy interply hybrid laminated composites for aerospace applications. IJPAC. 2018;23:591–605.
- Vasudevan A, Senthil Kumaran S, Naresh K, et al. Advanced 3D and 2D damage assessment of low velocity impact response of glass and Kevlar fiber reinforced epoxy hybrid composites. Adv Mater Process Technol. 2018;4:493–510.
- Rana AS, Kiran M, Vamshi K, et al. Mechanical, thermal, electrical and crystallographic behaviour of EPDM rubber/clay nanocomposites for out-door insulation applications. Adv Mater Process Technol. 2020;6:54–74.