References
- Gagnard X, Mouri T. Through silicon via: from the CMOS imager sensor wafer level package to the 3D integration. Microelectron Eng. 2009;87(3):470–476.
- Meind JD. Beyond Moore’s law: the interconnect era. IEEE Comput Sci Eng. 2003;5(1):20–24.
- Hou L, Ye T, Luo Q, et al. A method to alleviate hot spot problem in 3D IC. Microelectron Eng. 2018;190:19–27.
- Chan WJ, Kahng AB, Li JJ. Revisiting 3DIC benefit with multiple tiers. Integration. 2017;58:226–235.
- Mohseni Z, Reshadi M. A deadlock-free routing algorithm for Irregular 3D network-on-chips with wireless links. J Supercomputing. 2018;74(2):953–969.
- Flatscher M, Dielacher M, Herndl T, et al. A bulk acoustic wave (BAW) based transceiver for an in-tire-pressure monitoring sensor node. IEEE J Solid-State Circuits. 2010;45(1):167–177.
- Silicon Semiconductor [Internet]. ADEKA’S additive for copper plating ideal for TSV filling; 2013. [cited 2018 Sep 10]. Available from: https://siliconsemiconductor.net/
- Ray F A Survey of enabling technologies in successful consumer digital imaging products (Part 2: stacked Chip Image Sensors). 2017. [cited 2018 Sep 15]. Available from: http://www.techinsights.com/
- Emerging Materials for TSV Devices. Electronic Materials Industry Analysis Reports; 2012.
- Seo S-H, Hwang J-S, Yang J-M, et al. Failure mechanism of copper through-silicon vias under biased thermal stress. Thin Solid Films. 2013;546:14–17.
- Chen S, Qin F, an T, et al. Protrusion of electroplated copper filled in through silicon vias during annealing process. Microelectron Reliab. 2016;63:183–193.
- Dou H, Yang M, Chen Y, et al. Analysis of the structure evolution and crack propagation of Cu-Filled TSV after thermal shock test. Proceeding of 18th International Conference on Electronic Packaging Technology; 2017; Harbin, China: IEEE; 2017. p. 611–614.
- Lowenheim F. Electroplating-fundamentals of surface finishing. New York: McGraw-Hill Book Co; 1978.
- Sudagar J, Lian J, Sha W. Electroless nickel, alloy, composite and nano coatings – A critical review. J Alloys Compunds. 2013;571:183–204.
- Schlesinger M. Electroless deposition of nickel. In: Schlesinger M, Paunovic M, editors. Modern electroplating. 5th ed. New Jersey: John Wiley & Sons, Inc; 2010. p. 447–458.
- Wang L, Song C, Wang J, et al. A wet etching approach for the via-reveal of a wafer with through silicon vias. Microelectron Eng. 2017;179:31–36.
- Shahidin SAM, Fadil NA, Yusop MZ, et al. Effect of etching as pre-treatment for electroless copper plating on silicon wafer. J Teknologi. 2017;79(7):61–69.
- Shahidin SAM, Fadil NA, Yusop MZ, et al. Optimization of formaldehyde concentration on electroless copper deposition on alumina surface. AIP Conf Proc. 2018;1963(1):020014.
- ASTM. ASTM D3359-09e2: Standard Test Methods for Measuring Adhesion by Tape Test; 2009.
- Hemmous M, Layadi A, Guittoum A, et al. Structure, surface morphology and electrical properties of evaporated Ni thin films: effect of substrates, thickness and Cu underlayer. Thin Solid Films. 2014;562:229–328.
- Hu B, Sun R, Yu G, et al. Effect of bath pH and stabilizer on electroless nickel plating of magnesium alloys. Surf Coat Technol. 2013;228:84–91.
- Zhang J, Xie Z-H, Chen H, et al. Electroless deposition and characterization of a double-layered Ni-B/Ni-P coating on AZ91D Mg alloy from eco-friendly fluoride-free baths. Surf Coat Technol. 2018;342:178–189.
- Mallory GO, Hajdu JB. Electroless Plating: fundamentals and Applications. Orlando, FL: AESF; 1990.
- Genova V, Paglia L, Marra F, et al. Pure thick nickel coating obtained by electroless plating: surface characterization and wetting properties. Surf Coat Technol. 2019;357:595–603.
- Cheong W-J, Luan BL, Shoesmith DW. Protective coating on Mg AZ91D alloy – the effect of electroless nickel (EN) bath stabilizers on corrosion behaviour of Ni–P deposit. Corros Sci. 2007;49(4):1777–1798.
- Shaffer SJ, Rogers MJ. Tribological performance of various coatings in unlubricated sliding for use in small arms action components—A case study. Wear. 2007;263(7–12):1281–1290.
- Vitry V, Delaunois F. Anti-abrasive nanocoatings : Nanostructured electroless nickel-boron coatings for wear resistance. In: (M Aliofkhazraei, Ed.) Woodhead Publishing; 2015. p. 157–199.
- Loudjani MK, Sella C. Relation between microstructure and electric resistivity of Copper, Nickel, NixCu1-x Alloys and Ni/Cu bilayered thin films. Int J Thin Films Sci Technol. 2015;4(2):75–82.