References
- Chattopadhyay AB. Cutting temperature causes, effects, assessment and control. Ministry of Human Resourse& Development NPTEL Manufacturing Science II, lecture 11, Version 2,IIT Kharagpur, India. https://nptel.ac.in/content/storage2/courses/112105127/pdf/LM-11.pdf.
- Astakhov VP. Machining: fundamentals and recent advances, Springer;Chapter7, ecological machining: near-dry machining. 2008. p. 195–223.Springer-Verlag London.
- Dhar NR, Kamruzzaman M and Ahmed M. Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. J Mater Process Technol. 2006;172(2):299–304.
- Silva LR, Bianchi EC, Catai RE, et al. Study on the behavior of the minimum quantity lubricant-MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steel. J Braz Soc Mech Sci Eng. 2005;27(2):192–199. .
- Tasdelen B, Wikblom T, Ekered S. Studies on minimum quantity lubrication (MQL) and air cooling at drilling. J Mater Process Technol. 2008;200(1–3):339–346.
- An Q, Liu Z, Jiang L, et al. Experimental and numerical research on the effects of minimum quantity lubrication in thread turning of free-cutting steel AISI 1215. Proc Inst Mech Eng Part B. 2015;229(5):878–885.
- Srikant RR, Rao PN. Use of vegetable-based cutting fluids for sustainable machining. Sustainable Machining. Cham: Springer; 2017. p. 31–46.
- Huang WT, Wu DH, Chen JT. Robust design of using nanofluid/MQL in micro-drilling. Int J Adv Manuf Technol. 2016;85(9–12):2155–2161.
- Pashmforoush F, Bagherinia RD. Influence of water-based copper nanofluid on wheel loading and surface roughness during grinding of Inconel 738 superalloy. J Clean Prod. 2018;178:363–372.
- Sharma AK, Tiwari AK, Dixit AR. Prediction of temperature distribution over cutting tool with alumina-MWCNT hybrid nanofluid using computational fluid dynamics (CFD) analysis. Int J Adv Manuf Technol. 2018;97(1–4):427–439.
- Yıldırım CV, Sarıkaya M, Kıvak T, et al. The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625. Tribol Int. 2019;134:443–456.
- Amrita M. Srikant R R and Sitaramaraju A V. Performance evaluation of nanographite-based cutting fluid in machining process. Mater Manuf Processes. 2014;29(5):600–605.
- Amrita M, Srikant RR, Sitaramaraju AV, et al. Preparation and characterization of properties of nanographite-based cutting fluid for machining operations. Proc Ins Mech Eng J. 2014;228(3):243–252. .
- Srikant RR, Rao DN, Rao CS, et al. Mathematical modeling of the influence of emulsifier content on performance of cutting fluids. J Braz Soc Mech Sci Eng. 2008;30(2):139–144.
- Uhlmann E, Dethlefs I, Faltin F, et al. Cutting and drilling of metals and other materials: a comparison, reference module in materials science and materials engineering. Elsevier; 2016.
- Mia M, Dey PR, Hossain MS, et al. Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition. Measurement. 2018;122:380–391.