Effects of Welding Speed on Microstructure and Mechanical Properties of CO2 Laser Welded Dissimilar Butt Joints between Low Carbon Steel and Austenitic Stainless Steel

References

• Zhang X, Gaoyang M, Wang C. Microstructure and performance of hybrid laser-arc welded high-strength low alloy steel and austenitic stainless steel dissimilar joint. Opt Laser Technol. 2020;122(1):105878.
   Google Scholar
• Badgujar BP, Kumar S, Jha MN, et al. An investigation of electron beam welding of Nb-1Zr-0.1C alloy: process parameters and microstructural analysis. J Manuf Processes. 2017;28(1):326–335.
   Google Scholar
• Reisen U, Schleser M, Mokrov O, et al. Optimization of laser welding of DP/TRIP steel sheets using statistical approach. Opt Laser Technol. 2012;44(1):255–262.
   Web of Science ®Google Scholar
• Bidare P, Bitharas I, R M W, et al. Fluid and particle dynamics in laser powder bed fusion. Acta Materialia. 2018;142(1):107–120.
   Google Scholar
• Lia Z, Yua G, Hea X, et al. Analysis of surface tension driven flow and solidification behavior in laser linear welding of stainless steel. Opt Laser Technol. 2019. DOI:10.1016/j.optlastec.2019.105914
   PubMed Web of Science ®Google Scholar
• W K W, Liu Y, Q B Z, et al. Microstructure and local mechanical properties of a dissimilar metal welded joint with buttering layer in steam turbine rotor. Mater Sci Eng A. 2019;747(18):244–254.
   Google Scholar
• Pankaj P, Tiwari A, Bhadra R, et al. Experimental investigation on CO2 laser butt welding of AISI 304 stainless steel and mild steel thin sheets. Opt Laser Technol. 2019;119(1):105633.
   Google Scholar
• Palanivel R, Dinaharan I, Laubscher RF. Microstructure evolution and mechanical characterization of Nd: YAGlaser beam welded titanium tubes. Mater Charact. 2017;134(1):225–235.
   Google Scholar
• Rossini M, P R S, Cortese L, et al. Investigation on dissimilar laser welding of advanced high strength steel sheets for the automotive industry. Mater Sci Eng A. 2015;628(2):288–296.
   Google Scholar
• M N E, Coupland J, Marimuthu S. Microstructure and mechanical properties of a laser welded low carbon–stainless steel joint. J Mater Process Technol. 2014;214(12):2941–2948.
   Web of Science ®Google Scholar
• Longchao C, Xinyu S, Ping J, et al. Effects of welding speed on microstructure and mechanical property of fiber laser welded dissimilar butt joints between AISI316L and EH36. Metals. 2017;270(7):1–13.
   Google Scholar
• Anconaa A, P M L, Sorgente D, et al. Mechanical characterization of CO2 laser beam butt welds of AA5083. J Mater Process Technol. 2007;191(1):381–384.
   Web of Science ®Google Scholar
• K Y B, A G O and Hashmi MSJ. Multi-response optimization of CO2 laser-welding process of austenitic stainless steel. Opt Laser Technol. 2008;40(1):76–87.
   Web of Science ®Google Scholar
• A K L, Balasubramaniam V. Evaluation of micro-structure and mechanical properties of laser beam welded 409M grade ferritic stainless steel. J Iron and Steel Res Int. 2012;19(1):72–78.
   Web of Science ®Google Scholar
• Nikulina A, Bataev A, Smirnov A, et al. Microstructure and fracture behaviour of flash butt welds between dissimilar steels. Sci Tec Weld Joining. 2015;20(2):138–144.
   Web of Science ®Google Scholar
• C H K, J K C, M J K, et al. A study on the CO2 laser welding characteristics of high strength steel up to 1500 MPa for automotive application. J Achieve Mater Manuf Eng. 2010;39(2):79–86.
   Google Scholar
• Hajiannia I, Shamanian M, Kasiri M. Microstructure and mechanical properties of AISI347 stainless steel/A335 low alloy steel dissimilar joint produced by gas tungsten arc welding. Mater Des. 2013;50(1):566–573.
   Google Scholar
• Mishra A, Dixit D, Sharma AK. Study on microstructural and mechanical properties of dissimilar joint of laser beam welded Inconel 625 and SS 316. Int J Eng Adv Technol. 2018;6(1):1–20.
   Google Scholar
• Xia M, Tian Z, Zhao L, et al. Metallurgical and mechanical properties of fusion zones of TRIP steels in laser welding. ISIJ Inter. 2008;48(4):483–488.
   Web of Science ®Google Scholar
• Cheepu M, Venkateswarlu D, Nageswara Rao P, et al. Effect of process parameters and heat input on weld bead geometry of laser welded titanium Ti-6Al-4V alloy. Mater Sci Forum. 2019;969:613–618.
   Google Scholar
• Srinivas B, Murali Krishna N, Cheepu M, et al. Studies on post weld heat treatment of dissimilar aluminum alloys by laser beam welding technique. IOP Conf Series Mat Sci Eng. 2018;330:012079.
   Google Scholar
• Krishnaja D, Cheepu M, Venkateswarlu D. A review of research progress on dissimilar laser weld brazing of automotive applications. IOP Conf Series Mat Sci Eng. 2018;330:012073.
   Google Scholar
• Cheepu M, Venkateswarlu D, Nageswara Rao P, et al. Optimization of process parameters using surface response methodology for laser welding of titanium alloy. Mater Sci Forum. 2019;969:539–545.
   Google Scholar
• Srinivas B, Cheepu M, Sivaprasad K, et al. Effect of gaussian beam on microstructural and mechanical properties of dissimilar laser welding ofAA5083 and AA6061 alloys. IOP Conf Series Mat Sci Eng. 2018;330:012066.
   Google Scholar
• M P P, Kannan GR. Optimization of laser welding process parameters in dissimilar joint of stainless steel AISI316/AISI1018 low carbon steel to attain the maximum level of mechanical properties through PWHT. Opt Laser Technol. 2019;112:314–322.
   Web of Science ®Google Scholar
• M P P, Kannan GR. Optimization and metallurgical studies of CO2 laser welding on austenitic stainless steel to carbon steel joint. Ferroelectrics. 2017;519:223–235.
   Web of Science ®Google Scholar