Analysis of surface roughness during turning of AISI 52100 hardened alloy steel using minimal cutting fluid application

References

• Tönshoff HK, Arendt C, Amor RB. Cutting of hardened steel. Annal CIRP Keynote Pap. 2000;49(2):547–565.
   Google Scholar
• König W, Hochschule T, Komanduri R, et al. Machining of hard materials. CIRP Ann Manuf Technol. 1984;33(2):417–427.
   Google Scholar
• NIOSH. Metal working fluids - recommendation for chronic inhalation studies. National Institute for Occupational Safety and Health (NIOSH), Cincinnati, OH USA 45226; 2001.
   Google Scholar
• Leo Dev WK, Varadarajan AS. An environment friendly twin-jet minimal fluid application scheme for surface milling of hardened AISI4340 steel. Int J Manufact Syst. 2011;1(1):30–45.
   Google Scholar
• Philip PK, Varadarajan AS, Ramamoorthy B. Influence of cutting fluid composition and delivery variables on performance in hard turning using minimal fluid in pulsed jet form. J Instit Engineer. 2000;82(3):12–19.
   Google Scholar
• Vikram Kumar CHR, Kesavan Nair P, Ramamoorthy B. Performance of TiCN and TiAlN tools in machining hardened steel under dry, wet and minimum fluid application. Int J Mach Mach Mater. 2008;3(1/2):133–142.
   Google Scholar
• Varadarajan AS, Philip PK, Ramamoorthy B. Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning. Int J Mach Tools Manuf. 2002;42(2):193–200.
   Web of Science ®Google Scholar
• Vikram Kumar CHR, Ramamoorthy B. Performance of coated tools during hard turning under minimum fluid application. J Mater Process Technol. 2007;185(1–3):210–216.
   Web of Science ®Google Scholar
• Ram Kumar P, Leo Dev Wins K, Robinson Ganadurai R, et al. Investigations on hard turning with minimal multiple jet of cutting fluid. Proceedings of the International Conference on Frontiers in Design and Manufacturing Engineering; 2008; Karunya University, Coimbatore, Tamil Nadu, India. p. 188–191.
   Google Scholar
• Robinson Ganadurai R, Varadarajan AS. Investigation on the effect of an auxiliary pulsing jet of cutting fluid on the top side of the chip during hard turning with minimal fluid application. Int J Mach Mach Mater. 2012;12:321–336.
   Google Scholar
• Varadarajan AS, Robinson Ganadurai R, John Thomas E. Investigations on the effect of an environment friendly coconut oil based cutting fluid on cutting performance during hard turning with minimal fluid application. Proceedings of 24th Kerala Science Congress; 2012; Rubber Research Institute of India, Kottayam, Kerala, India. p. 400–403.
   Google Scholar
• Robinson Ganadurai R, Varadarajan AS. Investigations on the effect of semisolid lubrication on cutting performance during turning of hardened AISI 4340 steel with minimal cutting fluid application using high velocity narrow pulsed jet cutting fluid. Proceedings of International Conference on recent advances in Mechanical Engineering; 2010; NIT Silchar, Assam, India. p. 659–663.
   Google Scholar
• Sam Paul P, Varadarajan AS. Performance evaluation of hard turning of AISI 4340 steel with minimal fluid application in the presence of semi-solid lubricants. Proc IMechE Part J. 2013;227(7):738–748.
   Google Scholar
• Anil Raj R, Dev Anand M, Wins Leo Dev K, et al. ANFIS based model for surface roughness prediction for hard turning with minimal cutting fluid application. Indian J Sci Technol. 2016;9(13):1–5.
   Google Scholar
• Gajrani KK, Sankar MR. Role of eco-friendly cutting fluids and cooling techniques in machining. Mater Forming, Mach Post Process. Springer, Singapore. 2020;2195-0911:159–181.
   Google Scholar
• Gupta MK, Sood PK. Surface roughness measurements in NFMQL assisted turning of titanium alloys: an optimization approach. Friction. 2017;5(2):155–170.
   Web of Science ®Google Scholar
• Abbas AT, Gupta MK, Soliman MS, et al. Sustainability assessment associated with surface roughness and power consumption characteristics in nanofluid MQL-assisted turning of AISI 1045 steel. Int J Adv Manuf Technol. 2019;105:1311–1327.
   Web of Science ®Google Scholar
• Zaman PB, Dhar NR. Multi-objective optimization of double-jet MQL system parameters meant for enhancing the turning performance of Ti–6Al–4V alloy. Arab J Sci Eng. 2020;45:5673–5695.
   Web of Science ®Google Scholar
• Panda A, Sahoo AK, Panigrahi I, et al. Investigating machinability in hard turning of AISI 52100 bearing steel through performance measurement: QR, ANN and GRA study. Int J Automotive Mech Enginee. 2018;15(1):4935–4961.
   Google Scholar