State of Art on Development of Diamond Reinforced Tungsten Carbide based Cutting Tool by Powder Metallurgy Routes

References

• Dan L, Mathew J. Tool wear and failure monitoring techniques for turning - A review. Int J Mach Tools Manuf. 1990;30:579–598.
   Web of Science ®Google Scholar
• Awang M, Khalili AA, Pedapati SR. A review: thin protective coating for wear protection in high-temperature application. Metals. 2020;10:1–21.
   Web of Science ®Google Scholar
• Abdelrazek AH, Choudhury IA, Nukman Y, et al. Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment. Int J Adv Manuf Technol. 2020;106:4221–4245.
   Web of Science ®Google Scholar
• Srinivas MS, Panneer R, Suvin PS, et al., Synthesis and testing of novel neem oil-based cutting fluid with ionic liquid additives. Industry 4.0 and Advanced Manufacturing. Indian Institute of Science, Bangalore, India. 2021; 311–322.
   Google Scholar
• Basha MM, Basha SM, Singh BK, et al. A review on synthesis of zirconia toughened alumina (ZTA) for cutting tool applications. Mater Today Proc. 2020;26:534–541.
   Google Scholar
• Agarwal C, Wadhwa J, Pitroda A, et al. Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti6-Al-4V titanium alloy: cryogenic versus wet machining. Tribol Int. 2021;153:106597.
   Web of Science ®Google Scholar
• Boland JN, Li XS. Microstructural characterisation and wear behaviour of diamond composite materials. Materials. 2010;3:1390–1419.
   Web of Science ®Google Scholar
• Dold C, Henerichs M, Gilgen P, et al. Laser processing of coarse grain polycrystalline diamond (PCD) cutting tool inserts using picosecond laser pulses. Phys Procedia. 2013;41:610–616.
   Google Scholar
• Kidalov SV, Shakhov FM. Thermal conductivity of diamond composites. Materials. 2009;2:2467–2495.
   Web of Science ®Google Scholar
• Lin ZJ, Zhang JZ, Li BS, et al. Superhard diamond/tungsten carbide nanocomposites. Appl Phys Lett. 2011;98:12.
   Web of Science ®Google Scholar
• Grigoriev E, Rosliakov A. Electro Discharge Compaction of WC-Co Composite Material Containing Particles of Diamond. Trans Tech Publ. 2007;536:1181–1184.
   Google Scholar
• Tonshoff HK, Apmann HM, Asche J. Diamond tools in stone and civil engineering industry: cutting principles, wear and applications. J Diamond Related Mater. 2002;11:736–741.
   Web of Science ®Google Scholar
• Sharin PP, Yakovleva SP, Makharova SN, et al. Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites. In: Composite Interfaces.Taylor & Francis. 2018. p. 6440.
   Google Scholar
• Dudina DV, Bokhonov BB, Ukhina AV, et al. Spark Plasma Sintering of Diamond- and Nanodiamond-Metal Composites. Spark Plasma Sintering Mater. 2019;441–457.
   Google Scholar
• Zhou X, Wang Y, Li T, et al. Fabrication of diamond–SiC–TiC composite by a spark plasma sintering-reactive synthesis method. J Eur Ceram Soc. 2015;35:69–76.
   Web of Science ®Google Scholar
• Sadangi RK, Voronov OA, BH K. WC-Co-diamond nano-composites. Nanostruct Mater. 1999;12:1031–1034.
   Google Scholar
• Kitiwan M, Katsui H, Goto T. Consolidation of diamond composites using silicon carbide coated diamond powder. Sci Adv Mater. 2017;9(7):1093–1098.
   Web of Science ®Google Scholar
• Lisovsky AF, Bondarenko NA. The role of interphase and contact surfaces in the formations of structures and properties of diamond –(WC – co) composites- a review. J Superhard Mater. 2014;36(3):145–155.
   Web of Science ®Google Scholar
• Fernandes CM, Senos AMR. Cemented carbide phase diagrams: a review. Int J Refract Met Hard Mater. 2011;29:405–418.
   Web of Science ®Google Scholar
• Mukhopadhyay A, Basu B. Recent developments on WC based bulk composites. J Mater Sci. 2011;46:571–589.
   Web of Science ®Google Scholar
• Cha SI, Hong SH, Kim BK. Spark plasma sintering behavior of nanocrystalline WC-10Co Cemented carbide powders. Mater Sci Eng A. 2003;351:31–38.
   Web of Science ®Google Scholar
• Kim HC, Oh DY, Shon IJ. Sintering of nanophase WC-15vol% Co hard metals by rapid sintering process. Int J Refract Met Hard Mater. 2004;22:197–203.
   Web of Science ®Google Scholar
• Kim HC, Jeong IK, Shon IJ, et al. Fabrication of WC-8wt %Co hard materials by two rapid sintering processes. Int J Refract Met Hard Mater. 2007;25:336–340.
   Web of Science ®Google Scholar
• Sivaprahasam CSB, Sundaresan R. Microstructure and mechanical properties of nanocrystalline WC-12 Co consolidated by spark plasma sintering. Int J Refract Met Hard Mater. 2007;25:144–152.
   Web of Science ®Google Scholar
• Kitiwan M, Goto T. Fabrication of tungsten carbide–diamond composites using SiC-coated diamond. Int J Refract Met Hard Mater. 2019;85:105053.
   Web of Science ®Google Scholar
• Liu X, Lin T, Shao H, et al. Consolidation and properties of ultrafine binderless cemented carbide by spark plasma sintering. Rare Met. 2008;27:320–323.
   Web of Science ®Google Scholar
• Hei H, Shen Y, Ma J, et al. Effect of substrate temperature on SiC interlayers for diamond coatings deposition on WC-Co substrates. Vacuum. 2014;109:15–20.
   Web of Science ®Google Scholar
• Yue T, Yue W, Qin W, et al. Effects of environmental atmospheres on tribological behaviors of sintered polycrystalline diamond sliding against silicon nitride. Int J Refract Met Hard Mater. 2019;81:85–93.
   Web of Science ®Google Scholar
• Sung CM, Tai MF. Reactivites of transition metals with carbon: implications to the mechanism of diamond synthesis under high pressure. Int J Refract Met Hard Mater. 1997;15:237–256.
   Web of Science ®Google Scholar
• Rosinski M, Wachowicz J, Plocinski T, et al. Properties of WCCo/Diamond composites produced by PPS method intended for drill bits for machining of building stones. Pacific Rim Conference on Ceramic and Glass Technology. Coronado, California, USA  2013.
   Google Scholar
• Liu S, Han L, Zou Y, et al. Polycrystalline diamond compact with enhanced thermal stability. J Mater Sci Technol. 2017;33:1386–1391.
   Web of Science ®Google Scholar
• Blank VD, Churkin VD, Kulnitskiy BA, et al. Phase diagram of carbon. Mater Today Proc. 2018;5:26179–26182.
   Google Scholar
• Nazarchuk SN, Bochehka AA, Gavrilova VS, et al. The diamond – tungsten carbide polycrystalline composite material. J Superhard Mater. 2011;33(1):1–12.
   Web of Science ®Google Scholar
• Yamazaki D, Ito E, Yoshino T, et al. High-pressure generation in the Kawai-type multianvil apparatus equipped with tungsten-carbide anvils and sintered-diamond anvils, and X-ray observation on CaSnO3 and (Mg, Fe)SiO3. Comptes Rendus Geosci. 2019;351:253–259.
   Web of Science ®Google Scholar
• Michalski A, Rosinski M. Sintering diamond/cemented carbides by the pulse plasma sintering method. J Am Ceram Soc. 2008;91(11):3560–3565.
   Web of Science ®Google Scholar
• Shi XL, Shao GQ, Duan XL, et al. The effect of tungsten buffer layer on the stability of diamond with tungsten carbide-cobalt nanocomposite powder during spark plasma sintering. Diam Relat Mater. 2006;15(10):1643–1649.
   Web of Science ®Google Scholar
• Moriguchi H, Tsuduki K, Ikegaya A, et al. Sintering behavior and properties of diamond/cemented carbides. Int J Refract Met Hard Mater. 2007;25(3):237–243.
   Web of Science ®Google Scholar
• Miyamoto Y, Kashiwagi T, Hirota K, et al. Fabrication of new cemented carbide containing diamond coated with nanometer-sized SiC particles. J Am Ceram Soc. 2003;86(1):73–76.
   Web of Science ®Google Scholar
• He Z, Tu R, Katsui H, et al. Synthesis of SiC/SiO2 core–shell powder by rotary chemical vapor deposition and its consolidation by spark plasma sintering. Ceram Int. 2013;39:2605–2610.
   Web of Science ®Google Scholar
• Katsui H, Gota T. Coatings on ceramic powders by rotary chemical vapor deposition sintering of the coated powders. J Ceramic Soc Jpn. 2018;126(6):413–420.
   Web of Science ®Google Scholar
• He Z, Katsui H, Goto T. High-hardness diamond composite consolidated by spark plasma sintering. J Am Ceram Soc. 2016;99(6):1862–1865.
   Web of Science ®Google Scholar
• Solin SA, Ramdas AK. Raman spectrum of diamond. Phys Rev. 1970;1(4):1687.
   Google Scholar
• Sharin PP, Akimova MP, Yakovleva SP. Structural-phase state of the diamond-matrix transition zone in hard- alloy diamond-containing composites with diffusion metallization of diamonds during sintering with impregnation. Mater Sci Forum. 2019;945:763–770.
   Google Scholar
• Grasso S, Hu C, Maizza G, et al. Spark plasma sintering of diamond binderless WC composites. J Am Ceram Soc. 2011;1–6.
   Google Scholar