References
- Olabi AG, Hashmi MSJ Stress relief procedures for low carbon steel (1020) welded components. J Mater Process Technol. 1996;56(1–4):552–562. https://doi.org/10.1016/0924-0136(95)01869-7
- Perez M, Perrard F, Massardier V, et al. Low-temperature solubility of copper in iron: experimental study using thermoelectric power, small angle X-ray scattering and tomographic atom probe. Philos Mag. 2005;85(20):2197–2210. https://doi.org/10.1080/14786430500079645
- Gavrish PA Improving the technology of welding copper to steel [Sovershenstvovanie tekhnologii svarki medi so stal’yu]. Kramatorsk.Donbass State Engineering Academy; 2014 [in Russian]
- Ismail MY, Hashmi MSJ. Empirical study into quality initiatives implementation order. Total Quality Manage. 1998;9(4–5):128–129.
- Karpenko VM, Granovskii AV, Gavrish PA. Plasma-arc spray gun for surfacing parts of complex form. Chem Petrol Eng. 1989;25(8):474–475.
- Lyalyuk VP, Tarakanov AK, Zhuravlev FM, et al. Improvement in blast-furnace performance by using a new form of iron ore. Steel in Translation. 2018;48(1):39–44.
- Liu Z-J, Zhang J-L, Yang T-J. Low carbon operation of super-large blast furnaces in China. ISIJ Inter. 2015;55(6):1146–1156.
- Sarkar S, Baranwal RK, Mukherjee A, et al. Optimisation & minimisation of corrosion rate of electroless Ni-Co-P coating. Adv Mater Process Technol. 2020 Jul 2;6(3):487–508.
- Teng Z-J, Cheng -S-S, Du P-Y, et al. Mathematical model of burden distribution for the bell-less top of a blast furnace. Int J Miner Metall Mater. 2013;20(7):620–626.
- Ismail MY, MEl B, Hashmi MSJ. Quality management in the manufacturing industry: practice vs performance. Comput Ind Eng. 1998;35(3–4):519–522.
- Berezshnaya OV, Kassov VD, Gribkov EP. Combined technology for the parts recovery operating in stress factor conditions. Adv Mater Sci Eng. 2020;2020:9684726.
- Gribkov EP, Perig AV. Research of energy-power parameters during powder wire flattening. Int J Adv Manuf Technol. 2016 Aug;85(9–12):2887–2900.
- Sarwar M, Haider J, Persson M, Hellbergh H. Performance evaluation of bandsaw using scientific method when cutting tool steels. In: Hinduja S., Li L. (eds) Proceedings of the 37th International MATADOR 2012 Conference. School of CEIS, Northumbria University, Newcastle-upon-Tyne, NE1 8ST, United Kingdom. Springer, London; 2013. p. 209–12. doi:10.1007/978-1-4471-4480-9_5. Available from: https://doi.org/10.1007/978-1-4471-4480-9_5
- Oleksiak B, Siwiec G, Blacha A, et al. Influence of iron on the surface tension of copper. Arch Mater Sci Eng. 2010;44(1):39–42. Available from: http://www.amse.acmsse.h2.pl/vol44_1/4414.pdf
- Gavrish PA Investigation of the properties of copper and iron fusion boundary during welding [Issledovanie svoystv granitsy splavleniya medi i zheleza pri svarke] .Scientific news of Dahl university [Naukovі vіstі Dalіvs’kogo unіversitetu]. 2001;2. [in Russian]. Available from: http://nvdu.snu.edu.ua/wp-content/uploads/2020/03/2011_2_3.pdf
- Matarneh ME, Gharaibeh NS, Chigarev VV, et al. Reduction of copper to steel weld ductility for parts in metallurgical equipment. J Mech Eng. 2020;17(1):103–114. Available from: https://jmeche.uitm.edu.my/wp-content/uploads/2020/04/8_RI_17_1_P19_27.pdf
- Savage WF, Nippes EF, Stanton RP. Intergranular attack of steel by molten copper. Weld J (Miami, Fla). 1978;57(1):S9–16. Available from: https://app.aws.org/wj/supplement/WJ_1978_01_s9.pdf
- Chakraborty M, Hashmi MSJ. International research effort on graphene over the past 10 years. Adv Mater Process Technol. 2018;4(1):166–182.
- Gavrish PA, Pyts YE, Pyts VY. Strain hardening edgesat the welding copper with steel [Deformatsionnoe uprochnenie kromok pri svarke medi so stal’yu]. Mater Working Pressure [Obrobka Materialiv Tyskom] [in Russian]. 2013;3(36):150–153. Available from http://www.dgma.donetsk.ua/science_public/omd/omd_3(36)_2013/article/13gpacws.pdf
- Gavrish PA. The preliminary heating at welding copper and steel. Am J Mater Eng Technol. 2013 Sep 10;1(3):46–48. Available from: http://pubs.sciepub.com/materials/1/3/4/
- Meitei RKB, Maji P, Samadhiya A, et al. A study on induction welding of mild steel and copper with flux under applied load condition. J Manuf Process. 2018;34:435–441.
- Yan N, Yu SF, Chen Y. Inclusions, microstructure and properties of flux copper backing submerged arc weld metal. Sci Technol Weld Join. 2015 May;20(5):418–424. https://doi.org/10.1179/1362171815Y.0000000034.
- Gribkov EP, Perig AV, Danilyuk VA. Research into the process of producing powder tapes. Int J Adv Manuf Technol. 2015 Mar;77(5–8):1087–1104.
- Chigarev VV, Gavrin PA, Gribkov EP. Investigation of the process of drawing flux-cored wire for welding copper to steel. Welding International. 2012;26(9):718–22. doi:10.1080/09507116.2011.653152. Available from: https://doi.org/10.1080/09507116.2011.653152
- Chigarev VV, Gavrish PA, Gribkov EP. Improving the technological conditions of drawing flux-cored welding wires. Weld Int. 2014;28(1):59–61.
- Chigarev VV, Belik AG, Gribkov EP, et al. A mathematical model of the process of rolling flux-cored tapes. Weld Int. 2015;29(1):70–74.
- Kazeminezhad M, Taheri AK. An experimental investigation on the deformation behavior during wire flat rolling process. J Mater Process Technol. 2005 Mar 30;160(3):313–320.
- Lambiase F, Di Ilio A. Experimental and finite element investigation of roll drawing process. J Mater Eng Perform. 2012 Feb;21(2):161–166.
- YuK D, Gavrish PA. Investigation of the stress–strain and kinematic state of metal in rolling welded joints between copper and steel. Weld Int. 2017;31(11):874–878.
- Wang Y, Susmel L. The modified Manson-Coffin curve method to estimate fatigue lifetime under complex constant and variable amplitude multiaxial fatigue loading. Int J Fatigue. 2016 Feb;83(2):135–149.
- Meitei RKB, Maji P, Samadhiya A, et al. An experimental investigation on joining of copper and stainless steel by induction welding technique. Int J Precis Eng Manuf. 2020;21(4):613–621.
- Susmel L, Meneghetti G, Atzori B. A simple and efficient reformulation of the classical Manson-Coffin curve to predict lifetime under multiaxial fatigue loading-part II: notches. J Eng Mater Technol Trans ASME 2009 Apr;131(2):021010.
- Gurova T, Estefen SF, Leontiev A, et al. Welding residual stresses: a daily history. Sci Technol Weld Join. 2015 Oct;20(7):616–621.
- Cheng FJ, Zhang XT, Zhang Z, et al. New method of assessing susceptibility of welds to transverse cracking. Sci Technol Weld Join. 2016;21(1):20–24.
- Di Luozzo N, Boudard M, Fontana M, et al. Effective diffusion coefficient for Cu in steel joined by transient liquid phase bonding. Mater Des. 2016 Feb 15;92:760–766. https://doi.org/10.1016/j.matdes.2015.12.101
- Rajesh KVD, Buddi T, Kanth PR, et al. Microstructural and corrosion resistance study on plasma arc welded joints of AISI 304 and AISI 316. Adv Mater Process Technol. 2020;6(2):189–205.
- Pramanik D, Kuar AS, Sarkar S, et al. Optimisation of edge quality on stainless steel 316L using low power fibre laser beam machining. Adv Mater Process Technol. Forthcoming 2020:1–12. Apr 3: https://doi.org/10.1080/2374068X.2020.1745734
- Rajput SK, Kumar J, Mehtab Y, et al. Microstructural evolution and mechanical properties of 316L stainless steel using multiaxial forging. Available from Adv Mater Process Technol. 2020;63:509–518.
- Gavrish PA, Perig AV. Improvement of the heat state in welding copper with steel. Adv Mater Process Technol. 2020 Oct 1;6(4):703–717.
- Patel D, Jani S. ATIG welding: a small step towards sustainable manufacturing. Adv Mater Process Technol. Forthcoming 2020;1–23. Jun 26. DOI:10.1080/2374068X.2020.1785209
- Gavrish PA, Turchanin MA, Perig AV. Analysis of the reasons for the penetration of copper into steel during welding. Adv Mater Process Technol. Forthcoming 2020;1–17. Aug 09. DOI:10.1080/2374068X.2020.1801252
- Gavrish PA, Perig AV, Gribkov EP, et al. Improvement of technology for repair of ore-bucket unloader metal structure working under cyclic loading. Adv Mater Process Technol. Forthcoming 2020;1–20. Aug 13. DOI:10.1080/2374068X.2020.1805683