Influence of process parameters on microstructural evolution, solidification mode, and impact strength in joining of stainless steel thin sheets

References

• Agrawal BP, Chauhan AK, Kumar R, et al. GTA pulsed current welding of thin sheets of SS304 producing superior quality of joint at high welding speed. J Braz Soc Mech Sci Eng. 2017;39(11):4667–4675.
   Web of Science ®Google Scholar
• Kumar B, Bag S, Paul CP. Influence of heat input on welding induced distortion for Yb-fibre laser welded thin sheets. Mater Today Proc. 2020;26:2040–2046.
   Google Scholar
• Kumar R, Dilthey U, Dwivedi DK, et al. Welding of thin sheet of Al alloy (6082) by using Vario wire DC P-GMAW. Int J Adv Manuf Technol. 2009;42(1–2):102.
   Web of Science ®Google Scholar
• Dwibedi S, Jain NK, Investigation on autogenous joining of stainless steel sheets of different thickness using micro Plasma Transferred Arc (μ-PTA) process, M.Tech Thesis, Discipline of Mechanical Engineering, IIT Indore, 2016. http://dspace.iiti.ac.in:8080/xmlui/handle/123456789/329
   Google Scholar
• Dwibedi S, Bag S, http://www.weldfabtechtimes.com/article/plasma-arc-welding-in-small-scale-welding-process/, (2018).
   Google Scholar
• Dwibedi S, Bag S. Assessment by destructive and non-destructive approach to characterize 90/10 cupronickel weldments. Mater Today Proc. 2020;33:5014–5018.
   Google Scholar
• Ghosh N, Pal PK, Nandi G. Investigation on dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using grey based Taguchi method. Adv Mater Process Technol. 2018;4(3):385–401.
   Google Scholar
• Shit G, Kuppusamy MV, Ningshen S. Corrosion resistance behavior of GTAW Welded AISI type 304L stainless steel. Trans Indian Inst Met. 2019;72(12):2981.
   Web of Science ®Google Scholar
• Singh V, Chandrasekaran M, Samanta S. Study on the influence of heat input on mechanical property and microstructure of weld in GMAW of AISI 201LN stainless steel. Adv Mater Process Technol. 2020;6:1–11.
   Google Scholar
• Rajesh KD, Buddi T, Kanth PR, et al. Microstructural and corrosion resistance study on plasma arc welded joints of AISI 304 and AISI 316. Adv Mater Process Technol. 2020;6(2):189–205.
   Google Scholar
• Singh R, Slathia RS. Effect of cryogenic treatment on sensitization of 304 stainless steel in TIG welding. J Inst Eng India. 2016;97(2):127–130.
   Google Scholar
• Mohammed GR, Ishak M, Aqida SN, et al. Effects of heat input on microstructure, corrosion and mechanical characteristics of welded austenitic and duplex stainless steels: a review. Metals. 2017;7(2):39.
   Web of Science ®Google Scholar
• Bijivemula NR, Padmanabhan G. Experimental investigation on similar and dissimilar alloys of stainless steel joints by laser beam welding. Adv Mater Process Technol. 2021;1–16. DOI:10.1080/2374068X.2020.1865125
   Google Scholar
• Baruah M, Bag S. Characteristic difference of thermo-mechanical behavior in plasma microwelding of steels. Weld World. 2017;61(4):857–871.
   Web of Science ®Google Scholar
• Li J, Li H, Liang Y, et al. Effects of heat input and cooling rate during welding on intergranular corrosion behavior of high nitrogen austenitic stainless steel welded joints. Corros Sci. 2020;166:108445.
   Web of Science ®Google Scholar
• Jegdić B, Bobić B, Radojković B, et al. Corrosion resistance of welded joints of X5CrNi18-10 stainless steel. J Mater Process Technol. 2019;266:579–587.
   Web of Science ®Google Scholar
• Dwibedi S, Jain NK, Pathak S. Investigations on joining of stainless steel tailored blanks by µ-PTA process. Mater Manuf Processes. 2018;33(16):1851–1863.
   Web of Science ®Google Scholar
• Dwibedi S, Bag S, Lodhi DK, et al. Joining of different thickness dissimilar materials SS 316L/SS 310 By µ-PAW process. In: Shunmugam MS, Kanthababu M, editors. in Advances in additive manufacturing and joining. Singapore: Springer Singapore; 2020. p. 569–578.
   Google Scholar
• Vashishtha H, Taiwade RV, Sharma S, et al. Effect of welding processes on microstructural and mechanical properties of dissimilar weldments between conventional austenitic and high nitrogen austenitic stainless steels. J Manuf Processes. 2017;25:49–59.
   Web of Science ®Google Scholar
• Yan J, Gao M, Zeng X. Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding. Opt Lasers Eng. 2010;48(4):512–517.
   Web of Science ®Google Scholar
• Batool S, Khan M, Jaffery SHI, et al. Analysis of weld characteristics of micro-plasma arc welding and tungsten inert gas welding of thin stainless steel (304L) sheet. Proc Inst Mech Eng L J Mat Des Appl. 2016;230(6):1005–1017. .
   Google Scholar
• Chaudhary J, Jain NK, Pathak S, et al. Investigations on thin SS sheets joining by pulsed micro-plasma transferred arc process. Journal of Micromanufacturing. 2019;2(1):15–24. .
   Google Scholar
• Saha D, Pal S. Microstructure and work hardening behavior of micro-plasma arc welded AISI 316L sheet joint. J Mater Eng Perform. 2019;28(5):2588–2599.
   Web of Science ®Google Scholar
• Huang H-Y. Research on the activating flux gas tungsten arc welding and plasma arc welding for stainless steel. Met Mater Int. 2010;16(5):819–825.
   Web of Science ®Google Scholar
• Kumar B, Bag S, Mahadevan S, et al. On the interaction of microstructural morphology with residual stress in fiber laser welding of austenitic stainless steel, CIRP. CIRP Journal of Manufacturing Science and Technology. 2021;33:158–175.
   Web of Science ®Google Scholar
• Prabakaran MP, Kannan GR, Pandiyarajan R. Effects of welding speed on microstructure and mechanical properties of CO2 laser welded dissimilar butt joints between low carbon steel and austenitic stainless steel. Adv Mater Process Technol. 2020;1–12. DOI:10.1080/2374068X.2020.1855960
   Google Scholar
• Ragavendran M, Vasudevan M. Laser and hybrid laser welding of type 316L(N) austenitic stainless steel plates. Mater Manuf Processes. 2020;35(8):922–934.
   Web of Science ®Google Scholar
• Zhou Q, Yang Y, Jiang P, et al. A multi-fidelity information fusion metamodeling assisted laser beam welding process parameter optimization approach. Adv Eng Software. 2017;110:85–97.
   Web of Science ®Google Scholar
• Saida K, Nishijima Y, Ogiwara H, et al. Prediction of solidification cracking in laser welds of type 310 stainless steels. Weld Int. 2015;29(8):577–586.
   Google Scholar
• Rong Y, Huang Y, Xu J, et al. Numerical simulation and experiment analysis of angular distortion and residual stress in hybrid laser-magnetic welding. J Mater Process Technol. 2017;245:270–277.
   Web of Science ®Google Scholar
• Lee Y, Nordin M, Babu SS, et al. Effect of fluid convection on dendrite arm spacing in laser deposition. Metall Mat Trans B. 2014;45(4):1520–1529.
   Web of Science ®Google Scholar