References
- Amin SG, Ahmed MHM, Youssef HA. Computer aided design of acoustic horns for ultrasonic machining using finite element analysis. J Mater Process Technol. 1995;55:254–260. DOI:10.1016/0924-0136(95)02015-2
- Nad M. Ultrasonic horn design for ultrasonic machining technologies. Appl Comput Mech. 2010;4:79–88.
- Amini S, Soleimanimehr H, Nategh M, et al. FEM analysis of ultrasonic-vibration-assisted turning and the vibratory tool. J Mater Process Technol. 2008;201(1–3):43–47.
- Guzzo PL, Shinohara AH, Raslan AA. A comparative study on ultrasonic machining of hard and brittle materials. J Braz Soc Mech Sci Eng. 2004;26(1):56–61.
- Singh R, Khamba JS. Ultrasonic machining of titanium and its alloys: a review. J Mater Process Technol. 2006;173(2):125–135.
- Tawakoli T, Azarhoushang B. Influence of ultrasonic vibrations on dry grinding of soft steel. Int J Mach Tools Manuf. 2008;48(14):585–591.
- Pradhan S, Das SR, Nanda BK, et al. Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. J Braz Soc Mech Sci Eng. 2020;42(11). DOI:10.1007/s40430-020-02644-4
- Pradhan S, Das SR, Nanda BK, et al. Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modelling, optimization, and cost analysis. Surf Rev Lett. 2020. DOI:10.1142/S0218625X20500493
- Pradhan S, Das SR, Jena PC, et al. Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Mater Today Proc. 2021;44:1877–1887.
- Pradhan S, Das SR, Jena PC, et al. Machining performance evaluation underrecently developed sustainable HAJMprocess of zirconia ceramic using hotSiC abrasives: an experimental and simulation approach. ProcIMechE Part C: J Mech Eng Sci. DOI:10.1177/09544062211010199
- Pradhan S, Das SR, Dhupal D. Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 2020. DOI:10.1007/s12633-020-00641-9
- Seah KHW, Wong YS, Lee LC. Design of tool holders for ultrasonic machining using FEM. J Mater Process Technol. 1993;37(1–4):801–816.
- Mitrofanov AV, Babitsky VI, Silberschmidt VV. Finite element analysis of ultrasonically assisted turning of Inconel 718. J Mater Process Technol. 2004;153-154:233–239.
- Nad M, Cicmancova L The effect of the shape parameters onmodal properties of ultrasonic horn design for ultrasonic assisted machining. 8th International DAAAM Baltic Conference Industrial Engineering, Tallinn, Estonia, 2012; 57–62.
- Yadava V, Deoghare A. Design of horn for rotary ultrasonic machining using finite element method. Int J Adv Manuf Technol. 2008;39:9–20.
- Youssef HA, And El-Hofy H. Machining technology—machine tools and operations. CRC Press Taylor and Francis Group. 2008; 13: 978-1-4200-4339-6. DOI:10.1201/9781420043402.
- Wang X, Zhou M, Gan JG-K, et al. Theoretical and experimental studies of ultraprecision machining of brittle materials with ultrasonic vibration. Int J Adv Manufact Technol. 2002;20(2):99–102.
- Basem MA, Abdo SM, Darwish AM, et al. Experimental investigation of cutting forces in Ti- 6Al-4V alloys using rotary ultrasonic machining. International Conference on Aeronautical, Robotics and Manufacturing Engineering, Bangkok, Thailand, 2015.
- Zarepour H, Yeo SH. Predictive modeling of material removal modes in micro ultrasonic machining. Int J Mach Tools Manuf. 2012;62:13–23.
- Kang IS, Kimb JS, Seo YW, et al. An experimental study on the ultrasonic machining characteristics of engineering ceramics. J Mech Sci Technol. 2006;20(2):227–233.
- Tamilselvan, Raguraj. Optimization of process parameters of drilling in Ti-Tib composites using taguchi technique. Int J Mech Eng Robot. 2014;2(4):1–5.
- Muhammad R, Ahmed N, Roy A, et al. Numerical modelling of vibration-assisted turning of Ti-15333. Procedia CIRP. 2012;1:347–352.
- Kakinumaa Y, Ishida T, Koike R, et al. Denkena B and aoyama T. Ultrafast feed drilling of carbon fiber-reinforced thermoplastics. Procedia CIRP. 2015;35:91–95.
- Baghlani V, Mehbudi P, Akbari J, et al. Ultrasonic assisted deep drilling of Inconel 738LC superalloy. Procedia CIRP. 2013;6:571–576.
- Hocheng H, Kuo KL, Lin JT. Machinability of zirconia ceramics in ultrasonic drilling. Mater Manuf Processes. 1999;14(5):713–724.
- Komaraiah M, Reddy PN. A study on the influence of workpiece properties in ultrasonic machining. Int J Mach Tools Manuf. 1993;33(3):495–505.
- Wiercigrocha M, Wojewodab J, Krivtsovc AM. Dynamics of ultrasonic percussive drilling of hard rocks. J Sound Vib. 2005;280(3–5):739–757.
- Yuan S, Li Z, Zhang C, et al. Research into the transition of material removal mechanism for C/SiC in rotary ultrasonic face machining. Int J Adv Manuf Technol. 2018;17:1332–1340.
- Singh G, Pandey PM. Design and analysis of long stepped horn for ultrasonic-assisted sintering. Adv Mater Process Technol. 2020. DOI:10.1080/2374068X.2020.1758604
- Kandula J, P US, P RR. Experimental investigation of near-wake characteristics of hydrodynamic cavitating flow around circular cylindrical pins of different geometries with and without ultrasonic transducers. Adv Mater Process Technol. 2020;1–20. DOI:10.1080/2374068X.2020.1852522
- Singh RP, Kataria R, Kumar J. Machining of WC-Co composite using ultrasonic drilling: optimisation and mathematical modelling. Adv Mater Process Technol 2021;7(2):317–332.
- Pradhan S, Behera RK, Nanda BK, et al. Drilling of K-60 alumina ceramic with different grades abrasives at various temperatures using fluidised bed-hot abrasive jet machining (FB-HAJM) process. IOP conf. Series: Mater Sci Eng 2018;455:012076.
- Pradhan S, Tripathy SS, Sahu S, et al. Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Mater Today: Proc. 2020;26:2005–2012.