References
- Collings EW. Physical metallurgy of titanium alloys. OH 43201, USA: American Society of Metals; 1984.
- Leyens C, Peters M. Titanium and titanium applications. Germany: Wiley-VCH; Weinheim; 2003.
- Lutjering G, Williams JC. Titanium. 2nd ed. Berlin: Springer-Verlag; 2007. p. 1–77.
- Boyer R. An overview on the use of titanium in the aerospace industry. Mater.Sci. Eng. A. 1996;213(1–2):103–114.
- Fanning JC, Boyer RR. in Titanium 2003: science and technology. In: Luetjering G, Albrecht J, editors. Vol. IV. Titanium-2003: Science and Technology. Hamburg, Germany: Wiley-VCH; 2003. p. 2643–2650.
- Fanning JC, Nyakana SL, Patterson KM, et al. Titanium 2007: science and technology, Niinomi M, Akiyama S, Hagiwara M, et al. editors, The Japan Institute of Metals: Titanium 2007: Science and Technology. Kyoto, Japan. 3–7 June, 2007, Vol. I, 499–502.
- Venkatesh V, Kamal M, Fanning J. Titanium 2007: science and Technology, Niinomi M, Akiyama S, Hagiwara M, et al. editors, The Japan Institute of Metals: Titanium 2007: Science and Technology. Kyoto, Japan. 3–7 June, 2007, Vol. I, 503–506.
- Jones NG, Dashwood RJ, Jackson M, et al. Development of chevron-shaped α precipitates in Ti–5Al–5Mo–5V–3Cr. Scripta Mater. 2009;60(7):571–573.
- Jones NG, Dashwood RJ, Jackson M, et al. β phase decomposition in Ti–5Al–5Mo–5V–3Cr. Acta Mater. 2009;57(13):3830–3839.
- Nag S, Banerjee R, Srinivasan R, et al. ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloy. Acta Mater. 2009;57(7):2136–2147.
- Arrazola PJ, Garay A, Iriarte LM, et al. and Le Maitre F. Machinability of titanium alloys (Ti6Al4V and Ti555.3). J Mater Process Technol. 2009;209(5):2223–2230.
- Jones NG, Dashwood RJ, Dye D, et al. Thermomechanical processing of Ti–5Al–5Mo–5V–3Cr. Mater. Sci.Eng. A. 2008;490(1–2):369–377. .
- Manda P, Singh V, Chakkingal U, et al. Development of α precipitates in metastable Ti-5Al-5Mo-5V-3Cr and similar alloys. Mater Charact. 2016;120:220–228.
- Premkumar M, Chakkingal U, Singh AK. Effect of alloying elements in hot-rolled metastable β-titanium alloys. Part II: mechanical properties. Metall Mater Trans A. 2016;47:3447–3463.
- Mariana CMR, Garain T, Militzer M. In-situ measurement of α formation kinetics in a metastable β Ti-5553 alloy using laser ultrasonics. J Alloy Compound. 2021;866(158954):1–11.
- Zhao Q, Yang F, Torrens R. Allotropic phase transformation and high-temperature tensile deformation behaviour of powder metallurgy Ti-5553 alloy. Int. J. of Refractory Metals and Hard Materials. 2020;90:105235. .
- Salvador CAF, Opini VC, Mello MG. Mello MG and Caram R. Effects of double-aging heat-treatments on the microstructure and mechanical behavior of an Nb-modified Ti-5553 alloy. Mater Sci Eng A. 2019;743:716–725.
- Qin D, Guo D, Zheng L, et al. Dynamic recrystallization of Ti-5553 alloy during sub-transus thermomechanical processing: mechanisms and its role in formation of a bi-modal structure. J. Alloys and Compounds. 2018;769:725–731. .
- Schwab H, Bonisch M, Giebeler L, et al. Eckert J and Kunn U. Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating. Mater Des. 2017;130:83–89.
- Yolton CF, Froes FH, Malone RF. Alloying element effects in metastable beta titanium alloys. Metall Trans A. 1979;10(1):132–134.
- Schultz LG. A direct method of determining preferred orientation of a flat reflection sample using a Geiger counter X-ray spectrometer. J Appl Phys. 1949;20(11):1030–1033.
- Lagaree K, PKSFA Reg. U.S. patent, registered version 2.04, PKWARE Inc., 1989–1993.
- Levinger BW. Lattice parameters of beta titanium at room temperature. J Met. 1953;5:195.
- Dehghan-Manshadi A, Dippenaar RJ. Development of α-phase morphologies during low temperature isothermal heat treatment of a Ti–5Al–5Mo–5V–3Cr alloy. Mater Sci Eng A. 2011;528(3):1833–1839.
- Jones NG, Dashwood RJ, Dye D, et al. The flow behavior and microstructural evolution of Ti-5Al-5Mo-5V-3Cr during Subtransus Isothermal Forging. Metall Mater Trans A. 2009;40(8):1944–1954.
- Manda P, Ghosal P, Chakkingal U, et al. Effect of alloying elements in hot-rolled metastable β-titanium alloys: part I. Evolution of Microstructure and Texture, Metallurgical and Materials Transactions A. 2015;46:2646–2663.