References
- Pandre S, Morchhale A, Mahalle G, et al. Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution. Arch Civ Mech Eng. 2021;21(3):95.
- Huh H, Kim SB, Song JH, et al. Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body. Int J Mech Sci. 2008;50(5):918–931.
- Tasan CC, Diehl M, Yan D, et al. An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design. Annu Rev Mater Res. Annual Reviews Inc. 2015 July 1:391–431. DOI:10.1146/annurev-matsci-070214-021103
- Pandre S, Kotkunde N, Takalkar P, et al. Flow stress behavior, constitutive modeling, and microstructural characteristics of DP 590 steel at elevated temperatures. J Mater Eng Perform. 2019;28(12):7565–7581.
- Roth CC, Mohr D. Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: experiments and modeling. Int J Plast. 2014;56:19–44.
- Chakraborti PC, Mitra MK. Microstructure and tensile properties of high strength duplex ferrite-martensite (DFM) steels. Mater Sci Eng A. 2007;466(1–2):123–133.
- Bayramin B, Şimşir C, Efe M. Dynamic strain aging in DP steels at forming relevant strain rates and temperatures. Mater Sci Eng A. 2017;704(Sept):164–172.
- Baragar DL. The high temperature and high strain-rate behaviour of a plain carbon and an HSLA steel. J Mech Work Technol. 1987;14(3):295–307.
- Beynon ND, Oliver S, Jones TB, et al. Tensile and work hardening properties of low carbon dual phase strip steels at high strain rates. Mater Sci Technol. 2005;21(7):771–778.
- Mahalle G, Kotkunde N, Gupta AK, et al. Efficacy of semi-empirical models for prediction of forming limit curve of IN718 alloy at elevated temperatures. Adv Mater Process Technol. 2020;1–13. DOI:10.1080/2374068X.2020.1792706
- Mahalle G, Kotkunde N, Gupta AK, et al. Prediction of flow stress behaviour by materials modelling technique for inconel 718 alloy at elevated temperature. Adv Mater Process Technol. 2020;1–8. DOI:10.1080/2374068X.2020.1728649
- Mahalle G, Kotkunde N, Gupta AK, et al. Analysis of hot workability of inconel alloys using processing maps. In: Advances in computational methods in manufacturing. Springer; 2019. p. 109–118. DOI:10.1007/978-981-32-9072-3_10.
- Badrish CA, Kotkunde N, Mahalle G, et al. Analysis of hot anisotropic tensile flow stress and strain hardening behavior for inconel 625 alloy. J Mater Eng Perform. 2019;28(12):7537–7553.
- Sung JH, Kim JH, Wagoner RH. A plastic constitutive equation incorporating strain, strain-rate, and temperature. Int J Plast. 2010;26(12):1746–1771.
- Tsuchida N, Izaki Y, Tanaka T, et al. Effects of temperature and strain rate on stress-strain curves for dual-phase steels and their calculations by using the kocks- mecking model. ISIJ Int. 2012;52(4):729–734.
- Curtze S, Kuokkala VT, Hokka M, et al. Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates. Mater Sci Eng A. 2009;507(1–2):124–131.
- Queiroz RRU, Cunha FGG, Gonzalez BM. Study of dynamic strain aging in dual phase steel. Mater Sci Eng A. 2012;543:84–87.
- Dieter GE. Mechanical metallurgy SI metric edition. 2011.
- Takuda H, Fujimoto H, Hatta N. Modelling on flow stress of Mg-Al-Zn alloys at elevated temperatures. J Mater Process Technol. 1998;80–81:513–516.
- Mahalle G, Kotkunde N, Gupta AK, et al. Microstructure characteristics and comparative analysis of constitutive models for flow stress prediction of inconel 718 alloy. J Mater Eng Perform. 2019;28(6): 3321–3321.
- Mahalle G, Kotkunde N, Shah R, et al. Analysis of flow stress behaviour of inconel alloys at elevated temperatures using constitutive model. J Phys Conf Ser. 2018;1063(012037):1–5.
- Zhang XH. Experimental and numerical study of magnesium alloy during hot-working process [Doctoral dissertation]. Shanghai Jiaotong University; 2003.