Experimental Investigation And Surface Quality Parameters Optimization In WEDM Machining Of D-Series Tool Steels

References

• Devarajaiah D, Muthumari. Evaluation of power consumption and MRR in WEDM of Ti–6Al–4V alloy and its simultaneous optimization for sustainable production. C. J Braz. Soc. Mech. Sci. Eng. 2018;400:1–18.
   Google Scholar
• Scott D, Bovina S, K P R. Analysis and optimization of parameter combinations in wire electrical discharge machining. Int J Prod Res. 1991;29(11):2189–2207.
   Web of Science ®Google Scholar
• Miller SF, Shih AJ, Qu J. Investigation of the spark cycle on material removal rate in wire electrical discharge machining of advanced materials. Int J Mach Tools Manuf. 2004;44(4):391–400.
   Web of Science ®Google Scholar
• Sarkar S, Mitra S, Bhattacharyya B. Parametric analysis and optimization of wire electrical discharge machining of γtitanium aluminide allo. J Mater Process Technol. 2005;159(3):286–294.
   Web of Science ®Google Scholar
• Mahapatra SS, Patnaik A. Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method. Int J Adv Manuf Technol. 2007;34(9–10):911–925.
   Web of Science ®Google Scholar
• Menzies P, Koshy. Assessment of abrasion-assisted material removal in wire EDM. CIRP Annals- Manufacturing Technology. 2008;57(1):195–198.
   Web of Science ®Google Scholar
• Puri B, Bhattacharyya B. An analysis and optimization of the geometrical inaccuracy due to wire lag phenomenon in WEDM. Int J Mach Tools Manuf. 2003;43(2):151–159.
   Web of Science ®Google Scholar
• Nayak BB, Mahapatra SS. Multi-response optimization of WEDM process parameters using the AHP and TOPSIS method. International Journal on Theoretical and Applied Research in Mechanical Engineering. 2013;2(3):109–215.
   Google Scholar
• Rao PS, Ramji K, BeelaSatyanarayan. A Prediction of Material removal rate for Aluminum BIS-24345 Alloy in wire-cut EDM. Int J Eng Sci Technol. 2010;2(12):7729–7739.
   Google Scholar
• Ramakrishnan R, Karunamoorthy L. Multi response optimization of wire EDM operations using robust design of experiments. Int. J. Adv. Manuf. Technology. 2006;29(1–2):105–112.
   Web of Science ®Google Scholar
• Ross PJ. Effective Engineering design through simulation. International Transactions in Operational Research and Taguchi Techniques for Quality Engineering. 1996;3(2):169–185.
   Google Scholar
• Habeeb MD, UR Rahman MS. Experimental Investigation and Optimization of MRR, Surface Roughness and Overcut of AISI 316 Stainless Steel in EDM using Taguchi Method. Int J Advanc Sci Technol. 2019;28(16):1985.
   Google Scholar
• Sandeep M, Jamaleswara Kumar P. Analysis of Machining Parameters on D2Tool Steel in Wire Cut EDM. In: Advances in Lightweight Materials and Structures. Vol. 8. Singapore: Springer Proceedings in Materials; 2020.
   Google Scholar
• Manikyam Sandeep P. Jamaleswarakumar, Enhancement and gray relational analysis of EN 31 steel using parameters of wire cut electric discharge machine. Mater Today Proc. 2019;19(Part 2):884–889. 22147853.
   Google Scholar
• Chandramouli S, Eswaraiah K. Experimental investigation of EDM process parameters in machining of 17–4 PH Steel using Taguchi method. Mater Today Proc. 2018;5(2):5058–5067. 2214–7853.
   Google Scholar
• Torres A, Puertas I, Luis CJ. EDM machinability and surface roughness analysis of INCONEL 600 using graphite electrodes. Int J AdvManufTechnol. 2016;84:2671–2688.
   Web of Science ®Google Scholar
• Yelamasetti B, Kumar D, Saxena KK, et al. (2021) Experimental investigation on temperature profiles and residual stresses in GTAW dissimilar weldments of AA5052 and AA7075, Advances in Materials and Processing Technologies.
   Google Scholar
• Karthik S, Soorya Prakash K, Gopal PM, et al. Influence of materials and machining parameters on WEDM of Al/AlCoCrFeNiMo0.5 MMC. Mater Manuf Processes. 2019;34(7):759–768.
   Web of Science ®Google Scholar
• Mukhopadhyay A, Barman TK, Sahoo P, et al. Modeling and Optimization of Fractal Dimension in Wire Electrical Discharge Machining of EN 31 Steel Using the ANN-GA Approach. Materials. 2019;12(3):454.
   PubMed Web of Science ®Google Scholar
• Yang RT, Tzeng CJ, Yang YK, et al. Optimization of wire electrical discharge machining process parameters for cutting tungsten. Int J AdvManufTechnol. 2012;60:135–147.
   Web of Science ®Google Scholar
• Jahre MH, Idris MH, Hassim MH (2020) Effect of WEDM parameters on material removal rate and kerf’s width of cobalt-chromium molybdenum using full factorials design, Advances in Materials and Processing Technologies.
   Google Scholar