Investigations into the effect of thermal annealing on fused filament fabrication process

References

• Sathies T, Senthil P, Anoop MS. A review on advancements in applications of fused deposition modelling process. Rapid Prototyp J. 2020;26(4):669–687.
   Web of Science ®Google Scholar
• Mehrpouya M, Dehghanghadikolaei A, Fotovvati B, et al. The potential of additive manufacturing in the smart factory industrial 4.0: a review. Appl Sci. 2019;9(18):3865.
   Google Scholar
• Ford S, Despeisse M. Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. J Clean Prod. 2016;137:1573–1587.
   Web of Science ®Google Scholar
• Singh D, Singh R, Boparai KS. Investigations for surface roughness and dimensional accuracy of biomedical implants prepared by combining fused deposition modelling, vapour smoothing and investment casting. Adv Mater Process Technol. 2020;23:1–20.
   Google Scholar
• Huang SH, Liu P, Mokasdar A, et al. Additive manufacturing and its societal impact: a literature review. Int J Adv Manuf Technol. 2013;67(5–8):1191–1203.
   Web of Science ®Google Scholar
• Ngo TD, Kashani A, Imbalzano G, et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos B Eng. 2018;143:172–196.
   Web of Science ®Google Scholar
• Kumar R, Singh R, Ahuja IP, et al. Processing techniques of polymeric materials and their reinforced composites. Adv Mater Process Technol. 2020;6(3):591–607.
   Google Scholar
• Ferreira I, Machado M, Alves F, et al. A review on fibre reinforced composite printing via FFF. Rapid Prototyp J. 2019;25(6):972–988.
   Web of Science ®Google Scholar
• Sahai N, Saxena KK, Gogoi M. Modelling and simulation for fabrication of 3D printed polymeric porous tissue scaffolds. Adv Mater Process Technol. 2020;6(3):530–539.
   Google Scholar
• Pandey A, Awasthi A, Saxena KK. Metallic implants with properties and latest production techniques: a review. Adv Mater Process Technol. 2020;6(2):405–440.
   Google Scholar
• Singh S, Singh G, Prakash C, et al. Current status and future directions of fused filament fabrication. J Manuf Process. 2020;55:288–306.
   Web of Science ®Google Scholar
• Mohan N, Senthil P, Vinodh S, et al. A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual Phys Prototyp. 2017;12(1):47–59.
   Web of Science ®Google Scholar
• Chacon JM, Caminero MA, Garcia-Plaza E, et al. Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater Des. 2017;124:143–157.
   Web of Science ®Google Scholar
• Naveed N. Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM). Mater Technol. 2021;36(5):317–330.
   Web of Science ®Google Scholar
• Fernandez-Vicente M, Calle W, Ferrandiz S, et al. Effect of infill parameters on tensile mechanical behavior in desktop 3D printing. 3D Print Addit Manuf. 2016;3(3):183–192.
   Google Scholar
• Aloyaydi B, Sivasankaran S, Mustafa A. Investigation of infill-patterns on mechanical response of 3D printed polylactic-acid. Polym Test. 2020;87:106557.
   Web of Science ®Google Scholar
• Afrose MF, Masood SH, Iovenitti P, et al. Effects of part build orientations on fatigue behaviour of FDM-processed PLA material. Prog Addit Manuf. 2016;1(1–2):21–28.
   Google Scholar
• Rajpurohit SR, Dave HK. Effect of process parameters on tensile strength of FDM printed PLA part. Rapid Prototyp J. 2018;24(8):1317–1324.
   Web of Science ®Google Scholar
• Dave HK, Prajapati AR, Rajpurohit SR, et al. Investigation on tensile strength and failure modes of FDM printed part using in-house fabricated PLA filament. Adv Mater Process Technol. 2020;15:1–22.
   Google Scholar
• Wang Z, Cai N, Dai Q, et al. Effect of thermal annealing on mechanical properties of polyelectrolyte complex nanofiber membranes. Fibers Polym. 2014;15(7):1406–1413.
   Web of Science ®Google Scholar
• Srithep Y, Nealey P, Turng LS. Effects of annealing time and temperature on the crystallinity and heat resistance behavior of injection‐molded poly (lactic acid). Polym Eng Sci. 2013;53(3):580–588.
   Web of Science ®Google Scholar
• Butt J, Bhaskar R. Investigating the effects of annealing on the mechanical properties of FFF-Printed thermoplastics. J Manuf Mater Process. 2020;4:38.
   Google Scholar
• Wach RA, Wolszczak P, Adamus‐Wlodarczyk A. Enhancement of mechanical properties of FDM‐PLA parts via thermal annealing. Macromol Mater Eng. 2018;303(9):1800169.
   Web of Science ®Google Scholar
• Hart KR, Dunn RM, Sietins JM, et al. Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing. Polym. 2018;144:192–204.
   Web of Science ®Google Scholar
• Sunny S, Chen H, Malik A, et al. Influence of residual stress and fluid–structure interaction on the impact behavior of fused filament fabrication components. Addit Manuf. 2021;37:101662.
   Web of Science ®Google Scholar
• Harris M, Potgieter J, Archer R, et al. Effect of material and process specific factors on the strength of printed parts in fused filament fabrication: a review of recent developments. Mater. 2019;12(10):1664.
   Google Scholar
• Dizon JRC, Jr AH E, Chen Q, et al. Mechanical characterization of 3D-printed polymers. Addit Manuf. 2018;20:44–67.
   Web of Science ®Google Scholar
• Akhoundi B, Nabipour M, Hajami F, et al. An experimental study of nozzle temperature and heat treatment (annealing) effects on mechanical properties of high‐temperature polylactic acid in fused deposition modeling. Polym Eng Sci. 2020;60(5):979–987.
   Web of Science ®Google Scholar
• Pastorek M, Kovalcik A. Effects of thermal annealing as polymer processing step on poly (lactic acid). Mater Manuf Process. 2018;33(15):1674–1680.
   Web of Science ®Google Scholar
• Rane R, Kulkarni A, Prajapati H, et al. Post-process effects of isothermal annealing and initially applied static uniaxial loading on the ultimate tensile strength of fused filament fabrication parts. Mater. 2020;13(2):352.
   Google Scholar
• Prajapati H, Chalise D, Ravoori D, et al. Improvement in build-direction thermal conductivity in extrusion-based polymer additive manufacturing through thermal annealing. Addit Manuf. 2019;26:242–249.
   Web of Science ®Google Scholar
• Bhandari S, Lopez-Anido RA, Gardner DJ. Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing. Addit Manuf. 2019;30:100922.
   Web of Science ®Google Scholar
• Kotsilkova R, Petrova-Doycheva I, Menseidov D, et al. Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly (lactic) acid-based filament for 3D printing. Compos Sci Technol. 2019;181:107712.
   Web of Science ®Google Scholar
• Basgul C, Yu T, MacDonald DW, et al. Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages? J Mech Behav Biomed Mater. 2020;102:103455.
   PubMed Web of Science ®Google Scholar
• Casavola C, Cazzato A, Moramarco V, et al. Residual stress measurement in fused deposition modelling parts. Polym Test. 2017;58:249–255.
   Web of Science ®Google Scholar
• Liao Y, Liu C, Coppola B, et al. Effect of porosity and crystallinity on 3D printed PLA properties. Polym. 2019;11(9):1487.
   PubMed Web of Science ®Google Scholar