Channel deformation of bilayer material using tool rollers: Part I-Springback

References

• http://www.field.org.uk/how-can-factories-affect-the-environment/
   Google Scholar
• https://www.nhtsa.gov/corporate-average-fuel-economy/safe
   Google Scholar
• The safer affordable fuel-efficient (SAFE) vehicles rule for model year 2021 – 2026 passenger cars and light trucks, final environmental impact statement, March 2020, https://www.nhtsa.gov/sites/nhtsa.dot.gov/files/documents/safe_vehicles_rule_feis.pdf
   Google Scholar
• Liu F, Zheng J, Xu P, et al. Forming mechanism of double-layered tubes by internal hydraulic expansion. Int J Press Vessels Pip. 2004;81(7):625–633.
   Web of Science ®Google Scholar
• Sponseller DL, Timmons GA, Bakker WT. Development of clad boiler tubes extruded from bimetallic centrifugal castings. J Mater Eng Perform. 1998;7(2):227–238.
   Web of Science ®Google Scholar
• Nikhare CP, 2015, An investigation on elastic recovery and residual hoop stress in steel-aluminum rings. Proc. of IDDRG2015; Shanghai, China, pp.160–170.
   Google Scholar
• Mori KI, Bay N, Fratini L, et al. Joining by plastic deformation. CIRP Ann-Manuf Technol. 2013;62(2):673–694.
   Web of Science ®Google Scholar
• Wang X, Li P, Wang R. Study on hydro-forming technology of manufacturing bimetallic CRA-lined pipe. Int J Mach Tools Manuf. 2005;45(4):373–378.
   Web of Science ®Google Scholar
• Spence MA, Roscoe CV, Schafer K, et al. Bi metal, CRA-lined pipe employed for North Sea field development. Oil Gas J. 1999;97(18):80–88.
   Web of Science ®Google Scholar
• Kim SH, Kim HW, Euh K, et al. Effect of wire brushing on warm roll bonding of 6XXX/5XXX/6XXX aluminum alloy clad sheets. Mater Des. 2012;35:290–295.
   Web of Science ®Google Scholar
• Li X, Zu G, Deng Q. An investigation of deformation behavior of bimetal clad sheets by asymmetrical rolling at room temperature. In: Light metals. 1rd ed. John Wiley & Sons, Inc; 2011. p. 611.
   Google Scholar
• Bhanumurthy K, Fotedar RK, Joyson D, et al. Development of tubular transition joints of aluminium/stainless steel by deformation diffusion bonding. Mater Sci Technol. 2006;22(3):321–330.
   Web of Science ®Google Scholar
• Sun XJ, Jie TAO, Guo XZ. Bonding properties of interface in Fe/Al clad tube prepared by explosive welding. Trans Nonferrous Met Soc China. 2011;21(10):2175–2180.
   Web of Science ®Google Scholar
• Kahraman N, Gülenç B, Findik F. Joining of titanium/stainless steel by explosive welding and effect on interface. J Mater Process Technol. 2005;169(2):127–133.
   Web of Science ®Google Scholar
• Ocelík V, De Hosson JTM. Thick metallic coatings produced by coaxial and side laser cladding: processing and properties. Adv Laser Mater Process. 2010; 426–457.
   Google Scholar
• Padmanabhan R, Baptista AJ, Oliveira MC, et al. Effect of anisotropy on the deep-drawing of mild steel and dual-phase steel tailor-welded blanks. J Mater Process Technol. 2007;184(1):288–293.
   Web of Science ®Google Scholar
• Kinsey B, Liu Z, Cao J. A novel forming technology for tailor-welded blanks. J Mater Process Technol. 2000;99(1):145–153.
   Web of Science ®Google Scholar
• Heo Y, Choi Y, Kim HY, et al. Characteristics of weld line movements for the deep drawing with drawbeads of tailor-welded blanks. J Mater Process Technol. 2001;111(1):164–169.
   Web of Science ®Google Scholar
• Padmanabhan R, Oliveira MC, Laurent H, et al. Study on springback in deep drawn tailor welded blanks. Int J Mater Form. 2009;2(S1):829–832.
   Google Scholar
• Schubert E, Klassen M, Zerner I, et al. Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industry. J Mater Process Technol. 2001;115(1):2–8.
   Web of Science ®Google Scholar
• Lokka AM, 1997, “An economic evaluation of tailor welded blanks in automotive applications”, Doctoral dissertation, Massachusetts Institute of Technology.
   Google Scholar
• Zadpoor AA, Sinke J, Benedictus R. Springback behavior of friction stir welded tailor-made blanks” Proc. of IDDRG2007; Gyor, Hungary; 2007.
   Google Scholar
• Firouzdor V, Kou S. Al-to-Mg friction stir welding: effect of positions of Al and Mg with respect to the welding tool. Weld J. 2009;88(11):213–224.
   Web of Science ®Google Scholar
• Silva MB, Skjødt M, Vilaça P, et al. Single point incremental forming of tailored blanks produced by friction stir welding. J Mater Process Technol. 2009;209(2):811–820.
   Web of Science ®Google Scholar
• Matsushita M, Kitani Y, Ikeda R, et al. Development of friction stir welding of high strength steel sheet. Sci Tec Weld Joining. 2011;16(2):181–187.
   Web of Science ®Google Scholar
• Bhardwaj N, Narayanan RG, Dixit US, et al. Recent developments in friction stir welding and resulting industrial practices. Adv Mater Process Technol. 2019;5(3):461–496.
   Google Scholar
• He S, Wu X, Hu SJ. Formability enhancement for tailor-welded blanks using blank holding force control. J Manuf Sci Eng. 2003;125(3):461–467.
   Web of Science ®Google Scholar
• Zhao KM, Chun BK, Lee JK. Finite element analysis of tailor-welded blanks. Finite Elem Anal Des. 2001;37(2):117–130.
   Web of Science ®Google Scholar
• Wagoner RH, Li M. Simulation of springback: through-thickness integration. Int J Plast. 2007;23(3):345–360.
   Web of Science ®Google Scholar
• Narasimhan N, Lovell M. Predicting springback in sheet metal forming: an explicit to implicit sequential solution procedure. Finite Elem Anal Des. 1999;33(1):29–42.
   Web of Science ®Google Scholar
• Cheng HS, Cao J, Xia ZC. An accelerated springback compensation method. Int J Mech Sci. 2007;49(3):267–279.
   Web of Science ®Google Scholar
• Li KP, Carden WP, Wagoner RH. Simulation of springback. Int J Mech Sci. 2002;44(1):103–122.
   Web of Science ®Google Scholar
• Gau JT, Kinzel GL. A new model for springback prediction in which the Bauschinger effect is considered. Int J Mech Sci. 2001;43(8):1813–1832.
   Web of Science ®Google Scholar
• Lee SW, Kim YT. A study on the springback in the sheet metal flange drawing. J Mater Process Technol. 2007;187:89–93.
   Web of Science ®Google Scholar
• Mori K, Akita K, Abe Y. Springback behaviour in bending of ultra-high-strength steel sheets using CNC servo press. Int J Mach Tools Manuf. 2007;47(2):321–325.
   Web of Science ®Google Scholar
• Lobdell MA, Nikhare CP, Roth JT. An electric touch for aluminum springback elimination. Int Deep Draw Res Group. Zurich, Switzerland. 2013; 381–386.
   Google Scholar
• Green CR, McNeal TA, Roth JT. Springback elimination for Al-6111 alloys using electrically-assisted manufacturing (EAM). Trans North Am Manuf Res Inst SME. 2009;37:403–410.
   Google Scholar
• Nguyen NT, Chakraborti N, Barlat F. Evolutionary optimization for conditions of variable BHF for springback reduction in AHSS-mild steel TWB. In: Yoon JW, Stoughton TB, Rolfe B, et al., editors. AIP conference proceedings. Melbourne, Australia. Vols. 1567, No. 1. AIP; 2013. p. 780–783.
   Google Scholar
• Badrish CA, Morchhale A, Kotkunde N, et al. Experimental and finite element studies of springback using split-ring test for Inconel 625 alloy. Adv Mater Process Technol. 2020;6(3):540–546.
   Google Scholar
• Wahed MA, Gupta AK, Gadi VSR, et al. Parameter optimisation in V-bending process at elevated temperatures to minimise spring back in Ti-6Al-4V alloy. Adv Mater Process Technol. 2020;6(2):350–364.
   Google Scholar
• Bhargava M, Kumar S, Bhatt A, et al. Experimental and simulation studies on bending behaviour of a profile tube. Adv Mater Process Technol. 2019;5(1):141–152.
   Google Scholar
• Wagoner RH, Lim H, Lee MG. Advanced issues in springback. Int J Plast. 2013;45:3–20.
   Web of Science ®Google Scholar
• Lingbeek R, Huetink J, Ohnimus S, et al. The development of a finite elements based springback compensation tool for sheet metal products. J Mater Process Technol. 2005;169(1):115–125.
   Web of Science ®Google Scholar
• Del Pozo D, de Lacalle LL, López JM, et al. Prediction of press/die deformation for an accurate manufacturing of drawing dies. Int J Adv Manuf Technol. 2008;37(7–8):649–656.
   Web of Science ®Google Scholar
• Nikhare CP. Springback reduction by using tool rollers. Int J Precis Eng Manuf. 2020;21(1):67–74.
   Web of Science ®Google Scholar
• Nikhare CP. A numerical study on channel deformation and springback using tool rollers. In: ASME international mechanical engineering congress and exposition. Vol. 84485. IMECE2021, American Society of Mechanical Engineers, Virtual conference.
   Google Scholar
• Nikhare CP, 2016, “Die for reducing springback and process thereof.” U.S. Patent 9,498,812.
   Google Scholar
• Nikhare CP, 2021, A numerical study on effect of tool roller rotation on channel springback. In ASME International Mechanical Engineering Congress and Exposition, IMECE2021, American Society of Mechanical Engineers, Virtual conference.
   Google Scholar
• Fu SY, Lauke B, Mäder E, et al. Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites. Compos Part A Appl Sci Manuf. 2000;31(10):1117–1125.
   Web of Science ®Google Scholar
• Nikhare CP. Springback analysis in bilayer material bending. In: ASME 2017 international mechanical engineering congress and exposition. IMECE2017, American Society of Mechanical Engineers, Tampa, Florida; 2017.
   Google Scholar