References
- Agarwal BD, Kumar P, Khanna SK. Determination of the fracture toughness of fabric reinforced composites by the J-integral approach. Compos Sci Technol. 1986;25(4):311–323.
- Rice JR. A path independent integral and the approximate analysis of strain concentration by notches and cracks. 1968;35(2):379–386.
- Rao BN, Rahman S. Mesh-free analysis of cracks in isotropic functionally graded materials. Eng Fract Mech. 2003;70(1):1–27.
- Banks-Sills L, Dolev O. The conservative M-integral for thermal-elastic problems. Int J Fract. 2004;125(1):149–170.
- Nasser MA, Hasan ST, Shah SAA. Analytical solution of isothermal fatigue crack growth in solid cylinder. Adv Mater Process Technol. 2015;1(3–4):294–305. 1.3-4
- Khanna SK, Shukla A. Energy absorption mechanisms during dynamic fracturing of fibre-reinforced composites. J Mater Sci. 1993;28(14):3722–3730.
- Chattopadhyay J, Pavankumar TV, Dutta BK, et al. Fracture experiments on through wall cracked elbows under in-plane bending moment: test results and theoretical/numerical analyses. Eng Fract Mech. 2005;72(10):1461–1497.
- Sarangi H, Murthy KSRK, Chakraborty D. Experimental verification of optimal strain gage locations for the accurate determination of mode I stress intensity factors. Eng Fract Mech. 2013;110:189–200.
- Ribeiro FC, Scarpin BT, Batalha GF. Experimental and numerical modelling and simulation of the creep age forming of aeronautic panels AA7XXX aluminium alloy. Adv Mater Process Technol. 2016;2(1):1–20.
- Meriem-Benziane M, Ibrahim G, Hamou Z, et al. Stress intensity factor investigation of critical surface crack in a cylinder. Adv Mater Process Technol. 2015;1(1–2):36–42. 1.1-2
- Alshoaibi AM, Ali Fageehi YA. Simulation of Quasi-Static Crack Propagation by Adaptive Finite Element Method. Metals. 2021;11(1):98.
- Jogdand PV, Murthy KSRK. A finite element based interior collocation method for the computation of stress intensity factors and T-stresses. Eng Fract Mech. 2010;77(7):1116–1127.
- Yoon JW, Cardoso RPR, Dick RE. Puncture fracture in an aluminum beverage can. Int J Impact Eng. 2010;37(2):150–160.
- Del Giudice S, Comini G, Mikhailov MD. Finite element analysis of combined free and forced convection. Int J Heat Mass Transfer. 1978;21(12):1619–1621.
- Łodygowski T, Sumelka W. Limitations in application of finite element method in acoustic numerical simulation. J Theor Appl Mech. 2006;44(4):849–865.
- Belytschko T, Black T. Elastic crack growth in finite elements with minimal remeshing. Int J Numer Method Biomed Eng. 1999;45(5):601–620.
- Dolbow J, Moës N, Belytschko T. Modeling fracture in Mindlin–Reer plates with the extended finite element method. Int J Solids Struct. 2000;37(48–50):7161–7183. 37.48-50
- Daux C, Moes N, Dolbow J, et al. Arbitrary branched and intersecting cracks with the extended finite element method. Int J Numer Method Biomed Eng. 2000;48(12):1741–1760.
- Dai P, Li Z. A plasticity-corrected stress intensity factor for fatigue crack growth in ductile materials. Acta Materialia. 2013;61(16):5988–5995.
- Irwin GR. Analysis of stresses and strains near the end of a crack transversing a plate. 1957;Trans. ASME, Ser. E, J. Appl. Mech. 24:361–364.
- Dugdale DS. Yielding of steel sheets containing slits. J Mech Phys Solids. 1960;8(2):100–104.
- Stephens RI, Fatemi, Ali, Stephens, RR, Fuchs, HO, et al. Metal fatigue in engineering. John Wiley & Sons; 2000.
- Kumar S, Singh IV, Mishra BK, et al. A homogenized multigrid XFEM to predict the crack growth behavior of ductile material in the presence of microstructural defects. Eng Fract Mech. 2019;205:577–602.
- Kumar M, Singh IV, Mishra BK. Fatigue crack growth simulations of plastically graded materials using XFEM and J-integral decomposition approach. Eng Fract Mech. 2019;216:106470.
- Gajjar M, Pathak H, Kumar S. A comparative study of linear elastic and elasto plastic fracture modeling by XFEM. Materials Today: Proceedings 18 (2019): 3733–3740.
- Gajjar M, Pathak H, Kumar S. Elasto-plastic fracture modeling for crack interaction with XFEM. Trans Indian Inst Met. 2020;73(6):1679–1687.
- Gajjar M, Pathak H. Fracture analysis of plastically graded material with thermo-mechanical J-integral. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2021): 1464420721991583.
- Feulvarch E, Lacroix R, Deschanels H. A 3D locking-free XFEM formulation for the von Mises elasto-plastic analysis of cracks. Comput Methods Appl Mech Eng. 2020;361:112805.
- Feulvarch E Lacroix, R, Deschanels, H, Pignol, M, et al. 3D XFEM investigation of the plasticity effect on fatigue propagation under thermo-mechanical loading. Int J Fract. 2021; 230:1–9.
- Bathe K-J. Finite element procedures. USA: Klaus-Jurgen Bathe; 2006.
- Pathak H, Singh A, Singh IV, et al. A simple and efficient XFEM approach for 3-D cracks simulations. Int J Fract. 2013;181(2):189–208.
- Sukumar N, Moes N, Moran B, et al. Extended finite element method for three-dimensional crack modelling. Int J Numer Method Biomed Eng. 2000;48(11):1549–1570.
- Gravouil A, Moës N, Belytschko T. Non‐planar 3D crack growth by the extended finite element and level sets—Part II: level set update. Int J Numer Method Biomed Eng. 2002;53(11):2569–2586.
- Goangseup Z, Belytschko T. New crack‐tip elements for XFEM and applications to cohesive cracks. Int J Numer Method Biomed Eng. 2003;57(15):2221–2240.
- Moës N, Dolbow J, Belytschko T. A finite element method for crack growth without remeshing. Int J Numer Method Biomed Eng. 1999;46(1):131–150.
- Kumar S, Singh IV, Mishra BK. XFEM simulation of stable crack growth using J–R curve under finite strain plasticity. Int J Mech Mater Des. 2014;10(2):165–177
- Hinton E, Roger Jones Owen D. Finite elements in plasticity: theory and practice. Swansea UK: Pineridge Press Limited; 2017.
- Walter R, Osgood WR. Description of stress-strain curves by three parameters NACA Technical Notes. 1943;NACA-TN-902 ark:/67531/metadc54697.
- Sukumar N, David LC, Moran B. Extended finite element method and fast marching method for three-dimensional fatigue crack propagation. Eng Fract Mech. 2003;70(1):29–48.
- ASTM E8/E8M-21. Standard Test Methods for Tension Testing of Metallic Materials. West Conshohocken PA: ASTM International. 2021; www.astm.org