Experimental and finite element analysis of temperature distribution in 409 M ferritic stainless steel by TIG, MIG and SMAW welding processes

References

• Wang X, Song J, Sun M, et al. Microstructure and mechanical properties of 12 wt.% Cr ferritic stainless steel with Ti and Nb dual stabilization. Mater Des. 2009;30:49–56.
   Google Scholar
• Patra S, Ghosh A, Sood J, et al. Effect of coarse grain band on the ridging severity of 409L ferritic stainless steel. Mater Des. 2016;106:336–348.
   Web of Science ®Google Scholar
• Lakshminarayanan AK, Shanmugam K, Balasubramanian V. Effect of welding processes on tensile and impact properties, hardness and microstructure of AISI 409M ferritic stainless joints fabricated by duplex stainless steel filler metal. J Iron Steel Res Int. 2009;16:66–72.
   Web of Science ®Google Scholar
• Lakshminarayanan AK, Balasubramanian V. Understanding the parameters controlling friction stir welding of AISI 409M ferritic stainless steel. Met Mater Int. 2011;17:969–981.
   Web of Science ®Google Scholar
• Weman K. . Welding processes handbook (Cambridge: Woodhead Publishing). 2012;.
   Google Scholar
• Hand book on stainless steel welding centre 2012.
   Google Scholar
• Deng D. FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Mater Des. 2009;30:359–366.
   Web of Science ®Google Scholar
• Malik MA, Qureshi ME, Dar NU. Numerical simulation of arc welding investigation of various process and heat source parameters. Fail Eng Mater Struct. 2007; 30:127–142
   Google Scholar
• Shanmugam NS, Buvanashekaran G, Sankaranarayanasamy K, et al. A transient finite element simulation of the temperature and bead profiles of T-joint laser welds. Mater Des. 2010;31:4528–4542.
   Web of Science ®Google Scholar
• Biswas P, Mahapatra MM, Mandal NR. Numerical and experimental study on prediction of thermal history and residual deformation of double-sided fillet welding. Proc Inst Mech Eng Part B J Eng Manuf. 2010;224:125–134.
   Web of Science ®Google Scholar
• Abid M, Qarni MJ. 3D Thermal finite element analysis of single pass girth welded low carbon steel pipe-flange joints. Turkish J Eng Environ Sci. 2009;33:281–293.
   Google Scholar
• Yaghi AH, Tanner DWJ, Hyde TH, et al. Finite element thermal analysis of the fusion welding of a P92 steel pipe. Mech Sci. 2012;3:33–42.
   Web of Science ®Google Scholar
• Tembhurkar C, Kataria R, Ambade S, et al. Effect of fillers and autogenous welding on dissimilar welded 316L austenitic and 430 ferritic stainless steels. J Mater Eng Perform. 2021;30(2):1444–1453.
   Web of Science ®Google Scholar
• Ambade S, Tembhurkar C, Patil A, et al. Effect of number of welding passes on the microstructure, mechanical and intergranular corrosion properties of 409M ferritic stainless steel. World J Eng. 2021. DOI:10.1108/wje-11-2020-0591
   Web of Science ®Google Scholar
• Chen BQ, Hashemzadeh M, Guedes Soares C. Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates. Ships Offshore Struct. 2018;13:273–282.
   Web of Science ®Google Scholar
• Darmadi DB, Tieu AK, Norrish J. A validated thermal model of bead-on-plate welding. Heat Mass Transfer. 2012;48:1219–1230.
   Web of Science ®Google Scholar
• Ejaz Qureshi M, and Ullah Dar N. Numerical simulation of arc welding investigation of various process and heat source parameters. Failure of Engineering Materials & Structures, MED UET Taxila. 2007 30 127–142 .
   Google Scholar
• Lakshminarayanan AK, Shanmugam K, Balasubramanian V. Effect of welding processes on tensile, impact, hardness and microstructure of joints made of AISI 409M FSS base metal and AISI 308L ASS filler metals. Ironmaking Steelmaking. 2009;36(1):75–80.
   Web of Science ®Google Scholar
• Das S, Vora J, Patel V, et al. Elucidating the effect of step cooling heat treatment on the properties of 2.25 Cr–1.0Mo steel welded with a combination of GMAW techniques incorporating metal- cored wires. Materials. 2021;14(20):6033.
   PubMed Web of Science ®Google Scholar
• Brykov MN, Petryshynets I, Džupon M, et al. Microstructure and properties of heat affected zone in high-carbon steel after welding with fast cooling in water. Materials. 2020;13(22):5059.
   PubMed Web of Science ®Google Scholar
• Ambade S, Patil A, Tembhurkar C, et al. Effect of filler, autogenous and GTA welding on microstructure, mechanical and corrosion properties of low nickel Cr-Mn austenitic stainless steel. Adv Mater Process Technol. 2021; DOI:10.1080/2374068X.2021.1970989.
   PubMedGoogle Scholar
• Tomaz IDV, Colaço FHG, Sarfraz S, et al. Investigations on quality characteristics in gas tungsten arc welding process using artificial neural network integrated with genetic algorithm. Int J Adv Manuf Technol. 2021;113:3569–3583.
   Web of Science ®Google Scholar
• Vora J, Patel VK, Srinivasan S, et al. Optimization of activated tungsten inert gas welding process parameters using heat transfer search algorithm: with experimental validation using case studies. Metals. 2021;11(6):981.
   Web of Science ®Google Scholar
• Tembhurkar C, Kataria R, Ambade S, et al. Transient analysis of gta-welded austenitic and ferritic stainless steel. Lect Notes Mech Eng. 2020:59–65.
   Google Scholar
• Deogade SR, Ambade PSP, Patil A. Finite element analysis of residual stresses on ferritic stainless steel using shield metal arc welding. Int J Eng Res Gen Sci 2015;3:1131–1137.
   Google Scholar
• Vidyarthy RS, Dwivedi DK. Weldability evaluation of 409 FSS with A-TIG welding process. Mater Today Proc. 2019;18:3052–3060.
   Google Scholar
• Almeida DF, Martins RF, Cardoso JB. Numerical simulation of residual stresses induced by TIG butt-welding of thin plates made of AISI 316L stainless steel. Procedia Struct Integr. 2017;5:633–639.
   Google Scholar
• Goldak JA, and Akhlaghi M. A book of “Computational Welding Mechanics”. Vol. XII (Springer) p. 321. 20 illus, Hardcover. 2005.
   Google Scholar