Studies on effect of powder metallurgy on the corrosion behaviour of Al-Al₂O_3p composites

References

• Yang LJ. The transient and steady wear coefficients of A6061 aluminium alloy reinforced with alumina particles. Compos.Sci.Technol. 2003;63(3–4):575–583.
   Web of Science ®Google Scholar
• C.e JMT. Dacostand and F.Velasco, P/M aluminum matrix composites: an overview. J Mater Process Technol. 2003;133(1–2):203–206.
   Web of Science ®Google Scholar
• Nunes RCR, Ramanathan LV. Corrosion behavior of alumina-aluminum and silicon carbide-aluminum metal-matrix composites. Corrosion. 1995;51(8):610–617.
   Web of Science ®Google Scholar
• C M, F Z, F B, et al. A.Frignani and G.Trabanelli, Application of Electrochemical Noise Analysis to Study the Corrosion Behavior of Aluminum Composites. J.Electrochem.Soc. 1995;142(2):405–410.
   Web of Science ®Google Scholar
• M.Zuhair G, and Amro MA-Q. Corrosion behavior of powder metallurgy aluminum alloy 6061/ Al2O3 metal matrix composites, The 6th Saudi Engineering conference KFUPM Dhahran Saudi Arabia. 5 (2002) 271.
   Google Scholar
• Saxena M, Modi OP. B.K.Prasad and A.K.Jha, erosion and corrosion characteristics of an aluminium alloy- alumina fibre composite. Wear. 1993;169(1):119–124.
   Web of Science ®Google Scholar
• A.m MA. Hassan and T.Qasim, Effect of process parameters on corrosion rate of friction stir welded aluminium SiC-Gr hybrid composites, Corros. Eng. Sci Techn. 2013;5:346–353.
   Google Scholar
• J.y Y, M M. Extended Abstracts. abstract no. 1981;155:81.
   Google Scholar
• Senthilkumar J. Effect of metallurgical factors on corrosion behavior of al-sicp </sub> composites fabricated by powder metallurgy. J Reinf Plast Compos. 2009;28(9):1087–1098
   Web of Science ®Google Scholar
• Ahmad Z, Abdul aleem BJ. Degradation of aluminium MMC in salt water and its control. Mater Des. 2002;23(2):173–180.
   Web of Science ®Google Scholar
• Balasubramanian V, Senthilkumar J, Balasubramanian M. Optimization of the corrosion behavior of AA7075 Al/SiC P and Al/Al 2 O 3 composites fabricated by powder metallurgy. J Reinf Plast Compos. 2008;27(15):1603–1613.
   Web of Science ®Google Scholar
• M.S.N bhat, M.K Surappa, and H.V, Sudhaker Nayak. Corrosion behaviour of silicon carbide particle reinforced 6061/Al alloy composites. J Mater Sci. 1991;26(18):4991–4996.
   Web of Science ®Google Scholar
• Senthilkumar J, Mohan Kumar PS, Balasubramanian V. Post weld heat treatment of continuous drive friction welded AA6061/SiC/ graphite hybrid composites- an investigation. Mater Res Express. 2019;6(12):1265e1.
   Web of Science ®Google Scholar
• P.p T. Pit morphology of aluminium alloy and silicon carbide/aluminum alloy metal matrix composites. Corrosion. 1990;46(5):402–409.
   Web of Science ®Google Scholar
• Vijayakumar P. G.MadhusudhanReddy and K.SrinivasaRoa, microstructure, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir welds- effect of post weld heat treatment. Def Technol. 2015;11(4):362–369.
   Google Scholar
• Ahmad Z, Al-Sulaiman F, Abdul Aleem BJ. Corrosion behavior of carbon reinforced plain-weave laminates. J Reinf Plast Compos. 2004;23(10):1041–1049.
   Web of Science ®Google Scholar
• Mclntyre JF, Conrad RK, Golledge SL. Technical note: the effect of heat treatment on the pitting behavior of SiC w /AA2124. Corros Sci. 1990;46(11):902–905.
   Google Scholar
• Zaki A, Abdul Aleem BJ. Corrosion behavior of a discontinuously reinforced composite in salt water environment. J Reinf Plast Compos. 2006;25(14):1507–1522.
   Web of Science ®Google Scholar
• A.Sadooghi KR, S.j H. The effect of Al2O3 content on tribology and corrosion properties of Mg-Al2O3 nano composites produced by single and double-action press. Mater.Chem.Phys. 2020;250:123058.
   Web of Science ®Google Scholar
• Zhang Z, Liu F, Han E-H. Long Xu and Paul C.Uzoma, effects of Al2O3 on the microstructure and corrosion behaviour of low pressure cold gas sprayed Al 2024- Al2O3 composite coatings on AA2024-T3 substrate, surf. 2019;Coat. Technol. 370:53–68.
   Web of Science ®Google Scholar
• NABN Zamani AKMAI, and Muhammad Nuruzzaman D. Fabrication and characterization of Al2O3 nano particle reinforced aluminium matrix composite via powder metallurgy, Materials Today: Proceedings Malaysia, 29 (2020) 190–195.
   Google Scholar
• Yang X, Wenya L, Siqi Y, et al. Electro chemical characterization and micro structure of cold sprayed AA 5083/ Al2O3 composite coatings. J Mater Sci Technol. 2020;59:117–128.
   Google Scholar
• Aribo S. Adeyemi fakorede, oladeji Ige and peter olubambi, erosion-corrosion behaviour of aluminium alloy 6063 hybrid composite. Wear. 2017;376-377:608–614.
   Web of Science ®Google Scholar
• Zhang Z, Qian Y, Jingjun X, et al. Corrosion behaviours of Cr2 AlC/α- Al2O3 composites in 3.5 wt% NaCl aqueous solution. Ceram Int. 2020;46:11846–11853.
   Google Scholar
• Ebrahim MR, Shehata OS, Amr HAF. Electrochemical behaviour of Al2O3/Al composite coated Al electrodes through surface mechanical alloying in alkaline media. Curr.Appl.Phys. 2019;19(4):388–393.
   Web of Science ®Google Scholar
• Palash Poddar VCS. P.K.De and K.L.Sahoo, processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Mat Sci Eng. 2007;A460:357–364.
   Google Scholar
• Hanim Mohamed Ariff A, Aznan Mohamad Najib M, Mohd Tahir S, et al. Effect of sintering temperature on the properties of porous Al2O3-10 wt% RHA/10 wt% Al composite. Adv Mater Process Technol. 2020;7:1–12.
   Google Scholar
• Aatthisugan I, Banerjee A, Moinuddin Hasan M. Aditya Singh patel et.al, effect of sintering temperature on microstructure and mechanical properties of aluminium composites, IOP conf.series. Mat Sci Eng. 2020;912:032070.
   Google Scholar
• M.Rahimian NE. N.Parvin and H.R.Baharvandi, the effect of sintering temperature and the amount of reinforcement on the properties of Al-Al2O3 composite. Mater Des. 2009;30(8):3333–3337.
   Web of Science ®Google Scholar