Study on surface integrity in turning of titanium using cryogenically treated CBN inserts

References

• DaSilva RB, Machado AR, Ezugwu EO, et al. Increasing productivity in high speed machining of Ti-6Al-4V alloy under high pressure coolant supply. International Journal of Machining and Machinability of Materials. 2007;2(2):222-232.
   Google Scholar
• Yang X, Richard-Liu C. Machining titanium and its alloys. Machining Science and Technology. 1999;3(1):107-139.
   Google Scholar
• Ezugwu EO, Wang ZM. Titanium alloys and their machinability—a review. J Mater Process Technol. 1997;68(3):262–274.
   Web of Science ®Google Scholar
• Li A, Zhao J, Luo H, et al. Progressive tool failure in high-speed dry milling of Ti-6Al-4V alloy with coated carbide tools. Int J Adv Manuf Technol. 2012;58(5–8):465–478.
   Web of Science ®Google Scholar
• Rafighi M. The cutting sound effect on the power consumption, surface roughness, and machining force in dry turning of Ti-6Al-4V titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science., vol. 236, no. 6, Jan. 2022, doi: 10.1177/09544062211072411.
   Google Scholar
• Ramesh S, Karunamoorthy L, Palanikumar K. Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5). Meas J Intl Meas Confederation. 2012;45(5):1266–1276.
   Web of Science ®Google Scholar
• Kumar R, Pandey A, Sahoo AK, et al. INVESTIGATION OF MACHINABILITY PERFORMANCE IN TURNING OF Ti–6Al–4V ELI ALLOY USING FIREFLY ALGORITHM AND GRNN APPROACHES. Surf Rev Lett. 2022 Apr;29(6):DOI:10.1142/S0218625X22500755
   Google Scholar
• Zareena AR, Veldhuis SC. Tool wear mechanisms and tool life enhancement in ultra-precision machining of titanium. J Mater Process Technol. 2012;212(3):560–570.
   Web of Science ®Google Scholar
• Rafighi M, Al Shehabi S, and Kaya MT. Sustainable hard turning of high Chromium AISI D2 tool steel using CBN and ceramic inserts. Transactions of the Indian Institute of Metals2021;74:1639–1653.
   Web of Science ®Google Scholar
• Dogra M, Sharma VS, Sachdeva A, et al. Performance evaluation of CBN, coated carbide, cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel. Int J Adv Manuf Technol. 2011;57(5):541–553. May 2011.
   Web of Science ®Google Scholar
• Gill SS, Singh R, Singh H, et al. Wear behaviour of cryogenically treated tungsten carbide inserts under dry and wet turning conditions. Int J Mach Tools Manuf. 2009;49(3–4):256–260.
   Web of Science ®Google Scholar
• Reddy TVS, Sornakumar T, Reddy MV, et al. Turning studies of deep cryogenic treated P-40 tungsten carbide cutting tool inserts- Technical communication. Mach Sci Technol. 2009;13(2):269–281.
   Web of Science ®Google Scholar
• Rafighi M. Effects of shallow cryogenic treatment on surface characteristics and machinability factors in hard turning of AISI 4140 steel. Part E: Journal of Process Mechanical Engineering. Feb 2022. doi:10.1177/09544089221083467
   PubMed Web of Science ®Google Scholar
• Rafighi M, Özdemir M, Das A, et al. MACHINABILITY INVESTIGATION OF CRYOGENICALLY TREATED HARDENED AISI 4140 ALLOY STEEL USING CBN INSERT UNDER SUSTAINABLE FINISH DRY HARD TURNING. Surf Rev Lett. 2022 Feb;29(4):DOI:10.1142/S0218625X22500470
   Google Scholar
• Özbek NA, Çiçek A, Gülesin M, et al. Effect of cutting conditions on wear performance of cryogenically treated tungsten carbide inserts in dry turning of stainless steel. Tribol Int. 2016;94:223–233.
   Web of Science ®Google Scholar
• Palanisamy A, Selvaraj T. Optimization of turning parameters for surface integrity properties on incoloy 800H superalloy using cryogenically treated multi-layer CVD coated tool. Surf Rev Lett. 2019;26(2):1–16.
   Web of Science ®Google Scholar
• Jawahir IS, Attia H, Biermann D, et al. Cryogenic manufacturing processes. CIRP Annals Manuf Technol. 2016;65(2):713–736.
   Web of Science ®Google Scholar
• Altan N, Çiçek A, Gülesin M, et al. International journal of machine tools & manufacture investigation of the effects of cryogenic treatment applied at different holding times to cemented carbide inserts on tool wear. Int J Mach Tools Manuf. 2014;86:34–43.
   Google Scholar
• Yong AYL, Seah KHW, Rahman M. Performance of cryogenically treated tungsten carbide tools in milling operations. Int J Adv Manuf Technol. 2007;32(7–8):638–643.
   Web of Science ®Google Scholar
• Eser A, Aşkar Ayyildiz E, Ayyildiz M, et al. Artificial intelligence-based surface roughness estimation modelling for milling of AA6061 alloy. Adv Mater Sci Eng. 2021;2021. DOI:10.1155/2021/5576600.
   Web of Science ®Google Scholar
• Karthik RMC, Malghan RL, Kara F, et al. Influence of support vector regression (SVR) on cryogenic face milling. Adv Mater Sci Eng. 2021;2021. DOI:10.1155/2021/9984369.
   Web of Science ®Google Scholar
• Manoj IV, Soni H, Narendranath S, et al. Examination of machining parameters and prediction of cutting velocity and surface roughness using RSM and ANN using WEDM of altemp HX. Adv Mater Sci Eng. 2022;2022. DOI:10.1155/2022/5192981.
   Web of Science ®Google Scholar
• Morehead MD, Huang Y, Luo J. Chip morphology characterization and modeling in machining hardened 52100 steels. Mach Sci Technol. 2007;11(3):335–354.
   Web of Science ®Google Scholar
• Das SR, Dhupal D, Kumar A. Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Meas J Intl Meas Confederation. 2015;62:108–126.
   Web of Science ®Google Scholar
• Das A, Das SR, Panda A, et al. Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Part E: Journal of Process Mechanical Engineering. Feb 2022. doi:10.1177/09544089221078137
   PubMed Web of Science ®Google Scholar
• Kara F, Aslantas K, Çiçek A. ANN and multiple regression method-based modelling of cutting forces in orthogonal machining of AISI 316L stainless steel. Neural Computing and Applications. 2015;26(1):237-250.
   Google Scholar
• Erkan Ö, Işık B, Çiçek A, et al. Prediction of damage factor in end milling of glass fibre reinforced plastic composites using artificial neural network. Appl Compos Mater. 2013;20(4):517–536.
   Web of Science ®Google Scholar
• Kara F, Karabatak M, Ayyıldız M, et al. Effect of machinability, microstructure and hardness of deep cryogenic treatment in hard turning of AISI D2 steel with ceramic cutting. Integr Med Res. 2019;9(1):969–983.
   Google Scholar