Machinability assessment of AA7075 composite reinforced with rice husk ash using spark erosion machining process

References

• Kumar VM, Venkatesh C. A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites. Mater Res Express. 2019;6(7):072001.
   Web of Science ®Google Scholar
• Suthar J, Patel K. Processing issues, machining, and applications of aluminum metal matrix composites. Mater Manuf Processes. 2018;33(5):499–527.
   Web of Science ®Google Scholar
• Bains PS, Sidhu SS, Payal H. Fabrication and machining of metal matrix composites: a review. Mater Manuf Processes. 2016;31(5):553–573.
   Web of Science ®Google Scholar
• Jain VK. Advanced machining processes. Allied publishers; 2009.
   Google Scholar
• Lauwers B, Kruth J-P, Liu W, et al. Investigation of material removal mechanisms in EDM of composite ceramic materials. J Mater Process Technol. 2004;149(1–3):347–352. DOI:10.1016/j.jmatprotec.2004.02.013
   Web of Science ®Google Scholar
• Lee SH, Li X. Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide. J Mater Process Technol. 2003;139(1–3):315–321.
   Web of Science ®Google Scholar
• Ul Haq MI, Raina A, Mohan S, et al. Potential of AA7075 as a tribological material for industrial applications-A review. 2021.
   Google Scholar
• Lal S, Kumar S, Khan ZA, et al. Multi-Response optimization of wire electrical discharge machining process parameters for Al7075/Al2O3/SiC hybrid composite using Taguchi-based grey relational analysis. Proc Inst Mech Eng Part B. 2015;229(2):229–237. DOI:10.1177/0954405414526382
   Web of Science ®Google Scholar
• Rao TB, Krishna AG. Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites. Int J Adv Manuf Technol. 2014;73(1–4):299–314.
   Web of Science ®Google Scholar
• Ramabalan S, Rajan HM, Dinaharan I, et al. Experimental investigation of MRR on in situ formed AA7075/TiB2 cast composites machining by wire EDM. Int J Mach Mach Mater. 2015;17(3–4):295–318. DOI:10.1504/IJMMM.2015.072001
   Google Scholar
• Ramanan G, Dhas JER, Ramachandran M. Optimization of material removal rate and surface roughness for wire electric discharge machining of AA7075 composites using grey relational analysis. Int J Veh Struct Syst. 2017;9(5):309–312.
   Google Scholar
• Alagarsamy S, Ravichandran M, Saravanan H. Development of mathematical model for predicting the electric erosion behavior of TiO2 filled Al-Zn-Mg-Cu (AA7075) alloy composite using RSM-DFA method. J Adv Manuf Syst. 2020;20(01):1-26.
   Web of Science ®Google Scholar
• Bahrami A, Soltani N, Pech-Canul M, et al. Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives. Crit Rev Environ Sci Technol. 2016;46(2):143–208. DOI:10.1080/10643389.2015.1077067
   Web of Science ®Google Scholar
• Arora G, Sharma S. A review on monolithic and hybrid metal–matrix composites reinforced with industrial-agro wastes. J Braz Soc Mech Sci Eng. 2017;39(11):4819–4835.
   Web of Science ®Google Scholar
• Bhoi NK, Singh H, Pratap S. Developments in the aluminum metal matrix composites reinforced by micro/nano particles–a review. J Compos Mater. 2020;54(6):813–833.
   Web of Science ®Google Scholar
• Chattopadhyay K, Satsangi P, Verma S, et al. Analysis of rotary electrical discharge machining characteristics in reversal magnetic field for copper-en8 steel system. Int J Adv Manuf Technol. 2008;38(9):925–937. DOI:10.1007/s00170-007-1149-y
   Web of Science ®Google Scholar
• Pradhan MK, Tiwari S. Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite. Int J Mach Mach Mater. 2017;19(5):457–482.
   Google Scholar
• Lee S, Li X. Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide. J Mater Process Technol. 2001;115(3):344–358.
   Web of Science ®Google Scholar
• Chen S, Lin M, Hsieh S, et al. The characteristics of cutting pipe mechanism with multi-electrodes in EDM. J Mater Process Technol. 2008;203(1–3):461–464. DOI:10.1016/j.jmatprotec.2007.10.059
   Web of Science ®Google Scholar
• Singh B, Kumar J, Kumar S. Influences of process parameters on MRR improvement in simple and powder-mixed EDM of AA6061/10% SiC composite. Mater Manuf Processes. 2015;30(3):303–312.
   Web of Science ®Google Scholar
• Sohani M, Gaitonde V, Siddeswarappa B, et al. Investigations into the effect of tool shapes with size factor consideration in sink electrical discharge machining (EDM) process. Int J Adv Manuf Technol. 2009;45(11):1131–1145. DOI:10.1007/s00170-009-2044-5
   Web of Science ®Google Scholar
• Chiang K-T. Modeling and analysis of the effects of machining parameters on the performance characteristics in the EDM process of Al 2 O 3+ TiC mixed ceramic. Int J Adv Manuf Technol. 2008;37(5–6):523–533.
   Web of Science ®Google Scholar
• Kuppan P, Rajadurai A, Narayanan S. Influence of EDM process parameters in deep hole drilling of Inconel 718. Int J Adv Manuf Technol. 2008;38(1):74–84.
   Web of Science ®Google Scholar
• Kiyak M, Çakır O. Examination of machining parameters on surface roughness in EDM of tool steel. J Mater Process Technol. 2007;191(1–3):141–144.
   Web of Science ®Google Scholar
• Singh B, Kumar J, Kumar S. Investigating the influence of process parameters of ZNC EDM on machinability of A6061/10% SiC composite. Adv Mater Sci Eng. 2013;2013:1–8.
   Web of Science ®Google Scholar
• Pandey A, Singh S. Current research trends in variants of electrical discharge machining: a review. Int J Eng Sci Technol. 2010;2(6):2172–2191.
   Google Scholar
• Kumar S, Singh R, Singh TP, et al. Surface modification by electrical discharge machining: a review. J Mater Process Technol. 2009;209(8):3675–3687. DOI:10.1016/j.jmatprotec.2008.09.032
   Web of Science ®Google Scholar