Forecasting the output using ANN models and effect of input factors on machinability of Duplex Steel 2205 in dry-turning operation for high strength and anti-corrosive applications

References

• Chiu LH, Su YY, Chen FS, et al. Microstructure and properties of active screen plasma nitrided duplex stainless steel. Mater Manuf Process. 2010;25(5):316–323.
   Web of Science ®Google Scholar
• Kant G, Sangwan KS. Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining. J Clean Prod. 2014;83:151–164.
   Web of Science ®Google Scholar
• Aggarwal A, Singh H, Kumar P, et al. Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi’s technique-A comparative analysis. J Mater Process Technol. 2008;200(1–3):373–384.
   Web of Science ®Google Scholar
• Selvaraj DP. Influence of cutting speed, feed rate and bulk texture on the surface finish of nitrogen alloyed Duplex Stainless Steels during dry turning. Eng. 2010;2(6):453–460.
   Google Scholar
• Koyee RD, Heisel U, Eisseler R, et al. Modeling and optimization of turning duplex stainless steels. J Manuf Process. 2014;16(4):451–467.
   Web of Science ®Google Scholar
• Krolczyk G, Nieslony P, Legutko S. Microhardness and surface integrity in turning process of duplex stainless steel (DSS) for different cutting conditions. J Mater Eng Perform. 2014;23(3):859–866.
   Web of Science ®Google Scholar
• Elangovan M, Ramachandran KI, Sugumaran V. Studies on Bayes classifier for condition monitoring of single point carbide tipped tool based on statistical and histogram features. Expert Syst Appl. 2010;37(3):2059–2065.
   Web of Science ®Google Scholar
• Krolczyk GM, Nieslony P, Legutko S. Determination of tool life and research wear during duplex stainless steel turning. Arch Civ Mech Eng. 2015;15(2):347–354.
   Web of Science ®Google Scholar
• Braham-Bouchnak T, Germain G, Robert P, et al. High pressure water jet assisted machining of duplex steel: machinability and tool life. Int J Mater Form. 2010;3(SUPPL. 1):507–510.
   Google Scholar
• Choi Y. Effects of cutting speed on surface integrity and fatigue performance of hard machined surfaces. Int J Precis Eng Manuf. 2019;20(1):139–146.
   Web of Science ®Google Scholar
• Li N, Chen YJ, Kong DD. Wear mechanism analysis and its effects on the cutting performance of PCBN inserts during turning of hardened 42crmo. Int J Precis Eng Manuf. 2018;19(9):1355–1368.
   Web of Science ®Google Scholar
• Menten T. Quality engineering using robust design. Technometrics. 1991;33(2):235–236.
   Google Scholar
• https://www.azom.com/article.aspx?ArticleID=958
   Google Scholar
• Davim JP, Gaitonde VN, Karnik SR. Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models. J Mater Process Technol. 2008;205(1–3):16–23.
   Web of Science ®Google Scholar
• Erzurumlu T, Oktem H. Comparison of response surface model with neural network in determining the surface quality of moulded parts. Mater Des. 2007;28(2):459–465.
   Web of Science ®Google Scholar
• Ezugwu EO, Fadare DA, Bonney J, et al. Modelling the correlation between cutting and process parameters in high-speed machining of Inconel 718 alloy using an artificial neural network. Int J Mach Tools Manuf. 2005;45(12–13):1375–1385.
   Web of Science ®Google Scholar
• Gupta AK. Predictive modelling of turning operations using response surface methodology, artificial neural networks and support vector regression. Int J Prod Res. 2010;48(3):763–778.
   Web of Science ®Google Scholar
• Al-Ahmari AMA. Prediction and optimisation models for turning operations. Int J Prod Res. 2008;46(15):4061–4081.
   Web of Science ®Google Scholar
• Bouzid Saï W, Lebrun JL. Influence of finishing by burnishing on surface characteristics. J Mater Eng Perform. 2003;12(1):37–40.
   Web of Science ®Google Scholar
• Abhang LB, Hameedullah M. Optimization of machining parameters in steel turning operation by Taguchi method. Procedia Eng. 2012;38:40–48.
   Google Scholar
• Senthilkumar N, Ganapathy T, Tamizharasan T. Optimisation of machining and geometrical parameters in turning process using Taguchi method. Aust J Mech Eng. 2014;12(2):233–246.
   Google Scholar
• Pereira JLTA, Campilho RDSG, Silva FJG, et al. Improving The efficiency of the bowden cable terminal injection process for the automotive industry. Processes. 2022;10(10):1953.
   Web of Science ®Google Scholar
• Prabhakar DAP, Shettigar AK, Herbert MA, et al. A comprehensive review of friction stir techniques in structural materials and alloys: challenges and trends. J Mater Res Technol. 2022;20:3025–3060, ISSN 2238-7854.
   Google Scholar
• Samal SK, Vishwanatha HM, Saxena KK, et al. 3D-printed satellite brackets: materials, manufacturing and applications. Crystals. 2022;12(8):1148.
   Web of Science ®Google Scholar
• Makwana M, Patel AM, Oza AD, et al. Effect of mass on the dynamic characteristics of single- and double-layered graphene-based nano resonators. Materials. 2022;15(16):5551.
   PubMed Web of Science ®Google Scholar
• Fuse K, Badheka V, Oza AD, et al. Microstructure and mechanical properties analysis of Al/Cu dissimilar alloys joining by using conventional and Bobbin tool friction stir welding. Materials. 2022;15(15):5159.
   PubMed Web of Science ®Google Scholar