Numerical simulation of mould filling process using ansys

References

• Yuwen X-X, Chen L, Han Y-J. Numerical simulation of casting filling process based on FLUENT. Energy Procedia. 2012;17:1864–1871.
   Google Scholar
• Menghuai W, Ludwig A, Kharicha A. A four-phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot. Appl Math Modell. 2017;41:102–120.
   Web of Science ®Google Scholar
• Tryggvason G, Bunner B, Esmaeeli A, et al. A front-tracking method for the computations of multiphase flow. J Comput Phys. 2001;169(2):708–759.
   Web of Science ®Google Scholar
• Kumar N, Bharti, A, Saxena, KK. A re-investigation: Effect of powder metallurgy parameters on the physical and mechanical properties of aluminium matrix composites Materials, Today: Proceedings. 2001; 44 (1):2188-2193.
   Google Scholar
• Tavakoli R, Babaei R, Varahram N, et al. Numerical simulation of liquid/gas phase flow during mold filling. Comput Methods Appl Mech Eng. 2006;196(1–3):697–713.
   Web of Science ®Google Scholar
• Pang S, Chen L, Zhang M, et al. Numerical simulation two phase flows of casting filling process using SOLA particle level set method. Appl Math Modell. 2010;34(12):4106–4122.
   Web of Science ®Google Scholar
• Jana S, Ray S, Durst F. A numerical method to compute solidification and melting processes. Appl Math Modell. 2007;31(1):93–119.
   Web of Science ®Google Scholar
• Choudhari CM, Narkhede BE, Mahajan SK. Methoding and simulation of LM 6 sand casting for defect minimization with its experimental validation. Procedia Eng. 2014;97:1145–1154.
   Google Scholar
• Kermanpur A, Mahmoudi S, Hajipour A. Numerical simulation of metal flow and solidification in the multi-cavity casting moulds of automotive components. J Mater Process Technol. 2008;206(1–3):62–68.
   Web of Science ®Google Scholar
• Gore YV, Choudhari CM, Narkhede BE. Investigation of solidification affecting parameters of sand-casting using ANOVA. Int J Eng Sci Technol (IJSTE). 2015;1: 29-34.
   Google Scholar
• Rajiv Kumar N, Umar Ahamed P, Mohamed Anwar AU. CFD analysis of fluid flow in sand casting. Int J Trend Res Dev (Ijtsrd). ISSN: 2456-6470. 2019 February;3(2):905–913. 10.31142/ijtsrd21553
   Google Scholar
• Dey D “Numerical simulation and study of solidification process during casting using FLUENT.” In International Conference on Thermal Engineering and Management Advances, pp. 325–331. Springer, Singapore, 2020.
   Google Scholar
• Prakash C, Singh S, Pabla B.S., Sidhu S S, Uddin M S. Bio-inspired low elastic biodegradable Mg-Zn-Mn-Si-HA alloy fabricated by spark plasma sintering. Mater Manuf Processes. 2019;34(4):357–368. DOI:10.1080/10426914.2018.1512117
   Web of Science ®Google Scholar
• Prakash C, Uddin M S. Effect of surface nano-porosities fabricated by powder mixed electric discharge machining on bone-implant interface: an experimental and finite element study. Nanosci Nanotechnol Lett. 2016;8(10):815–826. DOI:10.1166/nnl.2016.2255
   Google Scholar
• Singh H, Prakash C, Singh S. Plasma spray deposition of HA-TiO2 on β-phase Ti-35nb-7ta-5zr alloy for hip stem: characterization of bio-mechanical properties, wettability, and wear resistance. J Bionic Eng. 2020;17(5):1029–1044.
   Web of Science ®Google Scholar
• Basak AK, Pramanik A, Prakash C. Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression. Mater Sci Eng A. 2019;763:138141.
   Web of Science ®Google Scholar
• Patil RT, Metri VS, Tambore SS. Analysis and simulation of die filling in gravity die casting using MAGMA software. Int J Eng Res Technol (IJERT). 2015;4(11). DOI:10.17577/IJERTV4IS110461
   Google Scholar
• Sonia P, Kumar Jain J, Kumar Saxena K. Influence of ultrasonic vibration assistance in manufacturing processes: a review. Mater Manuf Processes. 2021;36(13):1451–1475.
   Web of Science ®Google Scholar
• Singh B, Singhal P, Saxena K K, Saxena R K . Influences of latent heat on temperature field, weld bead dimensions and melting efficiency during welding simulation. Met Mater Int. 2020;1–19.
   Web of Science ®Google Scholar
• Jinlong F, Wang K. Modelling and simulation of die casting process for A356 semi-solid alloy. Procedia Eng. 2014;81:1565–1570.
   Google Scholar
• Samyal R, Bagha A, Bedi R, Bahl S, Saxena K K, Sehgal S. Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZT sensor on the composite structures. Mater Res Express. 2021;8(7):075302. DOI:10.1088/2053-1591/ac0de9
   Web of Science ®Google Scholar
• Kumar J, Soota T, Rajput S K, Saxena K K. Machining and optimization of Zircaloy-2 using different tool electrodes. Mater Manuf Processes. 2021;36(13):1513–1523. DOI:10.1080/10426914.2021.1905829
   Web of Science ®Google Scholar