Influence of volumetric percentage of high entropy alloys on mechanical behaviour of 6061 T6 Al alloy surface composite processed by friction stir processing

References

• Durga A, Hari Kumar KC, Murthy BS. “Phase formation in equi-atomic high entropy alloys” CALPHAD approach and experimental studies. Trans Indian Inst Met. 2012;65(4):375–380.
   Web of Science ®Google Scholar
• Reddy CK, Krishna MG, Srikant P. Brief evolution story and some basic limitations of High Entropy Alloys (HEAs) – a review. Mater Today Proc. 2019;18:436–439.
   Google Scholar
• Wagih A, Abu-Oqail A, Fathy A. Effect of GNPs content on thermal and mechanical properties of a novel hybrid Cu-Al2O3/GNPs coated Ag nano composite. Ceram Int. 2019;45(1):1115–1124.
   Web of Science ®Google Scholar
• Barakat WS, Wagih A, Omayma A, et al. Effect of Al2O3 nanoparticles content and compaction temperature on properties of Al–Al2O3 coated Cu nanocomposites. Composites. 2019;175. DOI:10.1016/j.compositesb.2019.107140
   Google Scholar
• Wagih A, Fathy A, Kabeel AM. Optimum milling parameters for production of highly uniform metal-matrix nano-composites with improved mechanical properties. Adv Powder Technol. 2018;29(10):2527–2537.
   Web of Science ®Google Scholar
• Yuqing M, Liminga K, Fencheng L, et al. Effect of tool pin eccentricity on microstructure and mechanical properties in friction stir welded 7075 aluminium alloy thick plate. Mater Des. 2014;62:334–343.
   Web of Science ®Google Scholar
• Sadoun AM, Wagihb A, Fathyb A, et al. Effect of tool pin side area ratio on temperature distribution in friction stir welding. Results Phys. 2019;15(2019):102814.
   Google Scholar
• Aruri D, Kumar A, Kotiveerachary B. Tensilel properties of AA6061-T6/SiCp surface metal matrix composite produced by friction stir processing. Int J Mech Ind Eng. 2011;10:125–129.
   Google Scholar
• Zhang Y, Yang X, Liaw PK. Alloy design and properties optimization of high entropy alloys. J Miner Metals Mater Soc. 2012;64(7):830–838.
   Web of Science ®Google Scholar
• Ashby MF. Material selection for mechanical design. 4th ed. Oxford, UK: Butterworth-Heinemann, Elsevier; 2011.
   Google Scholar
• Kumar PS, Sastry CS, Devaraju A, et al. Effect of taper with threaded tool profile on mechanical and micro structural properties of friction stir welded 5083 aluminium alloy. Int J Res Eng Technol. 2016;05(07):224–228.
   Google Scholar
• Kishan V, Devaraju A, Prasanna Lakshmi K. Influence of volume percentage of NanoTib 2 particles on tribological & mechanical behaviour of 6061-T6 Al alloy nano-surface composite layer prepared via friction stir process. Defence Technol. 2017;13(1):16–21.
   Web of Science ®Google Scholar
• Kuziora P, Wyszyńska M, Polanski M, et al. Why the ball to powder ratio (BPR) is insufficient for describing the mechanical ball milling process. Int J Hydrogen Energy. 2014;39(18):9883–9887.
   Web of Science ®Google Scholar
• Devaraju A, Kumar A, Kotiveerachari B. Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid composites via friction stir processing. Mater Des. 2013;45:576–585.
   Web of Science ®Google Scholar
• Kumar PS, Devaraju A. Influence of tool rotational speed and pin profile on mechanical and microstructural characterization of friction stir welded 5083 aluminium alloy. Mater Today Proc. 2018;5(2):3518–3523.
   Google Scholar
• Maneesh KS, Rukminia P, Reddy SC, et al. Effect of high entropy alloy crystallite size on structural behavior and hardness of Al-MMC’s. Mater Today Proc. 2020;24:724–730.
   Google Scholar
• Tiwari RK, Bharti A, Tripathi H, et al. A re-investigation of mechanical properties of aluminium-based surface composites prepared by friction stir processing. Mater Today Proc. 2021;25:958–978.
   Google Scholar
• Sadoun AM, Najjar IMR, Wagih A. Electroless-plating of Ag nanoparticles on Al2O3 and graphene Nano sheets (GNs) for improved wettability and properties of Al–Al2O3/GNs nanocomposites. Ceram Int. 2021;47(8):10855–10865.
   Web of Science ®Google Scholar
• Najjar IMR, Sadoun AM, Alsoruji GS, et al. Predicting the mechanical properties of Cu–Al2O3 nanocomposites using machine learning and finite element simulation of indentation experiments. Ceram Int. 2022;48(6):7748–7758.
   Web of Science ®Google Scholar