Analysis on the aluminium dross waste as a base material for making brick for construction purposes

References

• Meshram A, Singh KK. Recovery of valuable products from hazardous aluminum dross: a review. Res Conser Recycl. 2018;130:95–108.
   Web of Science ®Google Scholar
• Mahinroosta M, Allahverdi A. Hazardous aluminum dross characterization and recycling strategies: a critical review. J Environ Manage. 2018;223:452–468. Epub 2018/06/30. DOI:10.1016/j.jenvman.2018.06.068.
   PubMed Web of Science ®Google Scholar
• Adeosun SO. Physical and mechanical properties of aluminum dross. Adv Mater. 2014;3:6.
   Google Scholar
• Liu NW, Chou MS. Reduction of secondary aluminum dross by a waste pickling liquor containing ferrous chloride. Sustain Environ Res. 2013;23:61–67.
   Google Scholar
• Yoo S-J, Kwak D-H, Lee S II, et al. Kinetics of aluminum dross dissolution in sec-butyl alcohol for aluminum sec-butoxide. Adv Powder Technol. 2011;22:617–622.
   Web of Science ®Google Scholar
• Mahinroosta M, Allahverdi A. A promising green process for synthesis of high purity activated-alumina nanopowder from secondary aluminum dross. J Clean Prod. 2018;179:93–102.
   Web of Science ®Google Scholar
• Li A, Zhang H, Yang H. Evaluation of aluminum dross as raw material for high-alumina refractory. Cerami Int. 2014;40:12585–12590.
   Web of Science ®Google Scholar
• Tsakiridis PE, Oustadakis P, Agatzini-Leonardou S. Aluminium recovery during black dross hydrothermal treatment. J Environ Chem Eng. 2013;1:23–32.
   Google Scholar
• Reddy M, Neeraja D, Kotaiah B. An experimental in vestigation on use of secondary aluminium dross in concrete. Int J Appl Sci Eng Manag. 2014;3:29–35.
   Google Scholar
• Abdulkadir A, Ajayi A, Hassan MI. Evaluating the chemical composition and the molar heat capacities of a white aluminum dross. Energy Procedia. 2015;75:2099–2105.
   Google Scholar
• Gil A, Korili SA. Management and valorization of aluminum saline slags: current status and future trends. Chemi Engin Jour. 2016;289:74–84.
   Web of Science ®Google Scholar
• Bediako M, Amankwah EO. Analysis of chemical composition of portland cement in Ghana: a key to understand the behavior of cement. Advan Mater Sci Eng. 2015;2015:5.
   Web of Science ®Google Scholar
• Ewais EMM, Khalil NM, Amin MS, et al. Utilization of aluminum sludge and aluminum slag (dross) for the manufacture of calcium aluminate cement. Ceram Int. 2009;35:3381–3388.
   Web of Science ®Google Scholar
• Kesim AG, Tokyay M, Yaman IO, et al. Properties of alinite cement produced by using soda sludge. Advan Cem Rese. 2013;25:104–111.
   Web of Science ®Google Scholar
• López-Alonso M, Martinez-Echevarria MJ, Garach L, et al. Feasible use of recycled alumina combined with recycled aggregates in road construction. Constr Build Mater. 2019;195:249–257.
   Web of Science ®Google Scholar
• Bajare D, Korjakins A, Kazjonovs J, et al. Pore structure of lightweight clay aggregate incorporate with non-metallic products coming from aluminium scrap recycling industry. Jo Euro Cera Soc. 2012;32:141–148.
   Web of Science ®Google Scholar
• Soós Z, Géber R, Tóth C, et al. Utilization of aluminium dross as asphalt filler. Epitoanyag J Silic Based Compos Mater. 2017;69(3):89–93.
   Web of Science ®Google Scholar
• Dai C. Development of aluminum dross-based material for engineering application. ME thesis. 2012.
   Google Scholar
• Madurwar M, Ralegaonkar R. Sugarcane bagasse ash brick as a novel insulator for dwellings. Proc Inst Civ Eng Constr Mater. 2017;170(5):235–243.
   Google Scholar
• Ozerkan N, Maki O, Anayeh M, et al. The effect of aluminium dross on mechanical and corrosion properties of concrete. 2014;3(3): 9912–9922.
   Google Scholar
• Mailar G, Sreedhara BM, Manu DS, et al. Investigation of concrete produced using recycled aluminium dross for hot weather concreting conditions. Resour-Effic Technol. 2016;2(2):68–80.
   Google Scholar
• Reddy MS, Neeraja D. Mechanical and durability aspects of concrete incorporating secondary aluminium slag. Reso Effi Technol. 2016;2:225–232.
   Google Scholar
• Liu Y, Leong BS, Hu Z-T, et al. Autoclaved aerated concrete incorporating waste aluminum dust as foaming agent. Constr Build Mat. 2017;148:140–147.
   Web of Science ®Google Scholar
• Javali S, Chandrashekar AR, Naganna SR, et al. Eco-concrete for sustainability: utilizing aluminium dross and iron slag as partial replacement materials. Cle Tech Enviro Poli. 2017;19:2291–2304.
   Web of Science ®Google Scholar
• Elinwa AU, Mbadike E. The use of aluminum waste for concrete production. Jo Asi Arch Buil Eng. 2011;10:217–220.
   Web of Science ®Google Scholar
• El Ouahabi M, El Boudour El Idrissi H, Daoudi L, et al. Moroccan clay deposits: physico-chemical properties in view of provenance studies on ancient ceramics. Appl Clay Sci. 2019;172:65–74.
   Web of Science ®Google Scholar
• Cho BH, Nam BH, An J, Youn H. Municipal Solid Waste Incineration (MSWI) Ashes as Construction Materials—A Review. Mater. 2020;13(14):3143.
   Google Scholar