References
- Wang MH. Analysis of alumina ceramic tools and their cutting performances. Adv Mater Sci Eng. 2012;580:501–504.
- Medvedovski E. Wear resistant engineering ceramics. Wear. 2001;249:821–828.
- Kumar A, Durai S, A R, et al. Wear behaviour of alumina based ceramic cutting tools on machining steels. Tribol Int. 2006;39:191–197.
- Rao P, Iwasa M, Kondoh I. Properties of low – temperature high purity α-alumina ceramics. J Mater Sci Lett. 2000;19:543–545.
- Shi XL, Xu FM, Zhang ZJ, et al. Mechanical properties of hot-pressed Al2O3/SiC composites. Materials. 2010;527(18–19):4646–4649.
- Souto P, Menezes M, Kiminamia RR, et al. Effect of Y2O3 additive on conventional and microwave sintering of mullite. Ceram Int. 2011;37:241–248.
- Madhan M, Prabhakaran G. Microwave versus conventional sintering: microstructure and mechanical properties of Al2O3–SiC ceramic composites. Bol Soc Esp Ceram Vidr. 2019;58:14–22.
- Maitra S, Roy J. Nano ceramic matrix composite: types, processing and applications. Sci Eng Compos. 2018;27–48.
- Ghadami TS, Baharvandi HR, Ghadami F. Influence of the vol% SiC on properties of pressureless Al2O3/SiC nanocomposites. J Compos Mater. 2015;50:1367–1375.
- Limpichaipanit A, Todd RI. The relationship between microstructure, fracture and abrasive wear in Al2O3/SiC nanocomposites and micro composites containing 5 and 10% SiC. J Eur Ceram Soc. 2009;29(13):2841–2848.
- Gupta M, Wong W, L E. Enhancing overall mechanical performance of metallic materials using two-directional microwave assisted rapid sintering. Scr Mater. 2005;52:479–483.
- Yadoji P, Peelamedu R, Agrawal D, et al. Microwave sintering of Ni–Zn ferrites: comparison with conventional sintering. Mater Sci Eng B. 2003;98:269–278.
- Bhoi N, Singh K, Pratap H, et al. Microwave material processing: a clean, green, and sustainable approach. Int J Sustain Eng. 2019;3–23.
- Siores E, Rego D. Microwave applications in materials joining. J Mater Process Technol. 1995;48:619–625.
- Coble RL. Sintering crystalline solids. intermediate and final state diffusion models. J Appl Phys. 1961;32:787–792.
- Nemati A, Surani F, Abdizadeh H, et al. The effects of nano MgO on physical and mechanical properties of Al2O3-SiC composites. J Ceram Sci Technol. 2012;3:29–34.
- Horn D, Messing S, G L. Anisotropic grain growth in TiO2-doped alumina. Mater Sci Eng A. 1995;195:169–178.
- Rahaman M. Ceramic processing and sintering.” CRC Press: Taylor & Francis; 2003, p. 875.
- Rasoulia TNE, Hassanzadeh-Tabrizib SA. In-situ fabrication of Al2O3–SiC nanocomposites using B2O3 as sintering aid. Ceram Int. 2013;39:3931–3938.
- Moradkhani R, Baharvandi HR, Vafaeesefat A, et al. Microstructure and mechanical properties of Al2O3-SiC nano composites with 0.05% MgO and different SIC volume fraction. Int J Adv Des Manuf Technol. 2012;5:99–105.
- Jarot R, Rahayu S, Mustika S, et al. Effect of TiO2 and MgO on microstructure of α-alumina ceramics and its sintering behavior. Adv Mater Res. 2015;1112:519–523.
- Dadkhah M, Saboori A, Jafri M. Investigating the physical properties of sintered alumina in the presence of MgO nanopowder. J Mater. 2014;2014:1–7.
- Serkan A. Effect of TiO2 doping on microstructural properties of Al2O3-Based single-crystal ceramic. J Ceram Process Res. 2011;12:21–25.
- Arab A, Sktani Z, D I, et al. Effect of MgO addition on the mechanical and dynamic properties of Zirconia Toughened Alumina (ZTA) ceramics. Materials. 2019;12:2440–2454.
- Hotasaa J, Picelli F, Hribalova S, et al. Sintering aids, their role and behaviour in the production of transparent ceramics. Open Ceramics. 2021;7:1-12.
- Oghbaei M, Mirzaee O. Microwave versus conventional sintering: a review of fundamentals, advantages and application. J Alloys Compd. 2010;494:175–189.