References
- Melania T, Cristina-Maria B. Comparison between deep-drawing and incremental forming processes from an environmental point of view. Mater Sci Forum. 2019;957:120–129. DOI:10.4028/scientific.net/MSF.957.120 MSF.
- “US3342051A.pdf.”.
- Schafer T, Schraft RD. Incremental sheet metal forming by industrial robots. Rapid Prototyp J. 2005;11(5):278–286.
- Emmens WC, Sebastiani G, van den Boogaard AH. The technology of Incremental sheet forming-A brief review of the history. J Mater Process Technol. 2010;210(8):981–997.
- Kim TJ, Yang DY. Improvement of formability for the incremental sheet metal forming process. Int J Mech Sci. 2000;42(7):1271–1286.
- Jeswiet J, Adams D, Doolan M, et al. Single point and asymmetric incremental forming. Adv Manuf. 2015;3(4):253–262.
- Malwad DS, Nandedkar VM. Deformation mechanism analysis of single point incremental sheet metal forming. Procedia Mater Sci. 2014;6(Icmpc):1505–1510.
- Cawley B, Adams D, Jeswiet J. Examining tool shapes in single point incremental forming. Trans North Am Manuf Res Inst SME. 2012;41(August): 114–120. 2013.
- Ke C, Yongjun W, Junbiao W. ScienceDirect an experimental and theoretical study on constitutive model of Al-2024T4 for sheet metal incremental forming. Procedia Manuf. 2020;50(2019):565–569.
- Behera AK (2013) Shape feature taxonomy development for toolpath optimisation in incremental sheet forming. PhD Thesis. Katholieke Universiteit Leuven. ISBN 978-94-6018-733-9
- Vanhove H, Carette Y, Vancleef S, et al. Production of thin shell clavicle implants through single point incremental forming. Procedia Eng. 2017;183:174–179.
- Abass KI. A Study to comparing spherical, ellipse and flat forming tool profile effect in single point incremental forming by finite element analysis. UPB Sci Bull Ser D Mech Eng. 2016;78(1):173–184.
- Prakash Singh R, Kumar Gupta S, Kumar Singh P, et al. Robot assisted incremental sheet forming of Al6061 under static pressure: preliminary study of thickness distribution within the deformation region. Mater Today Proc. 2021;47(xxxx):2737–2741.
- Kumar Y, Kumar S. Advances in material Forming and Joining; 2015. p. 29–47. doi:10.1007/978-81-322-2355-9
- Tisza M. General overview of sheet incremental forming. Manuf. Eng. 2012;55:113–120.
- Behera AK, Lu B, Ou H. Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts with intermediate curvatures between two feature types. Int J Adv Manuf Technol. 2016;83(5):1099–1111.
- Martins PAF, Bay N, Skjoedt M, et al. Theory of single point incremental forming. CIRP Ann Manuf Technol. 2008;57(1):247–252.
- Martins MABE, (2011). “Project and construction of a Single Point Incremental Forming Machine.” Master Thesis, Department of Mechanical Engineering, Univeristy of Aveiro, Aveiro, 81.]
- Li MZ, Cai ZY, Sui Z, et al. Multi-point forming technology for sheet metal. J Mater Process Technol. 2002;129(1–3):333–338.
- Reddy NV, Lingam R. Double sided incremental forming: Capabilities and challenges. J Phys Conf Ser. 2018;1063(1):012170.
- Ham M, Jeswiet J. Forming limit curves in single point incremental forming. CIRP Ann Manuf Technol. 2007;56(1):277–280.
- Mohanty S, Regalla SP, Daseswara Rao YV. Robot-assisted incremental sheet metal forming under the different forming condition. J Brazilian Soc Mech Sci Eng. 2019;41(2). DOI:10.1007/s40430-019-1581-6
- Bhasker RS, Kumar Y. Process capabilities and future scope of Incremental Sheet Forming (ISF). Materials Today: Proceedings. 2021;72:1014–1019. DOI:10.1016/j.matpr.2022.09.120
- Suresh K, Regalla SP. Effect of mesh parameters in finite element simulation of single point incremental sheet forming process. Procedia Mater Sci. 2014;6(Icmpc):376–382.
- Ai S, Long H. A review on material fracture mechanism in incremental sheet forming. Int J Adv Manuf Technol. 2019;104(1–4):33–61.
- Shi X, Hussain G, Zha G, et al. Study on formability of vertical parts formed by multi-stage incremental forming. Int J Adv Manuf Technol. 2014;75(5–8):1049–1053.
- Nimbalkar DH, Nandedkar VM. Review of incremental forming of sheet metal components. Int J Eng Res Appl. 2013;3(5):39–51.
- Suh CH, Jung YC, Kim YS. Effects of thickness and surface roughness on mechanical properties of aluminum sheets. J Mech Sci Technol. 2010;24(10):2091–2098.
- Xiao X, Il Kim C, Lv XD, et al. Formability and forming force in incremental sheet forming of AA7075-T6 at different temperatures. J Mech Sci Technol. 2019;33(8):3795–3802.
- Iseki H, Naganawa T. Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers. J Mater Process Technol. 2002;130–131:675–679.
- Fan G, Gao L, Hussain G, et al. Electric hot incremental forming: a novel technique. Int J Mach Tools Manuf. 2008;48(15):1688–1692.
- Hussain G, Gao L, Hayat N. Forming parameters and forming defects in incremental forming of an aluminum sheet: correlation, empirical modeling, and optimization: part a. Mater Manuf Process. 2011;26(12):1546–1553.
- Ambrogio G, Gagliardi F, Bruschi S, et al. On the high-speed single point incremental forming of titanium alloys. CIRP Ann Manuf Technol. 2013;62(1):243–246.
- Gatea S, Ou H, McCartney G. Review on the influence of process parameters in incremental sheet forming. Int J Adv Manuf Technol. 2016;87(1–4):479–499.
- Edwards WL, Grimm TJ, Ragai I, et al. Optimum process parameters for springback reduction of single point incrementally formed polycarbonate. Procedia Manuf. 2017;10:329–338.
- Al-Ghamdi KA, Hussain G. Threshold tool-radius condition maximizing the formability in SPIF considering a variety of materials: experimental and FE investigations. Int J Mach Tools Manuf. 2015;88:82–94.
- Centeno G, Martínez-Donaire AJ, Vallellano C, et al. Experimental study on the evaluation of necking and fracture strains in sheet metal forming processes. Procedia Eng. 2013;63(December):650–658. DOI:10.1016/j.proeng.2013.08.204
- Tharrett MR, Stoughton TB. Stretch-bend forming limits of 1008 AK steel. SAE Tech Pap. 2003;(724). DOI:10.4271/2003-01-1157.
- Huang Y, Smith S, Ziegert J, et al. Studies of size effect on the formability of a domed part in incremental forming. Proc ASME Int Manuf Sci Eng Conf Msec2008. 2009;1:645–654.
- Cui Z, Cedric Xia Z, Ren F, et al. Modeling and validation of deformation process for incremental sheet forming. J Manuf Process. 2013;15(2):236–241.
- Liu F, Li Y, Cheng Z, et al. Preliminary modelling of forming forces in three directions for incremental sheet forming process based on the contact area. Procedia Manuf. 2020;50(2019):630–636.
- Chang Z, Yang M, Chen J. Experimental investigations on deformation characteristics in microstructure level during incremental forming of AA5052 sheet. J Mater Process Technol. 2021;291(June 2020):117006.
- Kumar NS, Shetty A, Shetty A, et al. Effect of spindle speed and feed rate on surface roughness of carbon steels in CNC turning. Procedia Eng. 2012;38(Icmoc):691–697.
- Chang Z, Li M, Chen J. Analytical modeling and experimental validation of the forming force in several typical incremental sheet forming processes. Int J Mach Tools Manuf. 2019;140(December 2018):62–76.
- Bhatt DK, Rana J, Shah K, et al. Incremental sheet metal forming process: a review. Int J Eng Res Technol. 2016;4:1–9.
- McAnulty T, Jeswiet J, Doolan M. Formability in single point incremental forming: a comparative analysis of the state of the art. CIRP J Manuf Sci Technol. 2017;16:43–54.