Advanced search
Publication Cover
Advances in Materials and Processing Technologies Volume 10, 2024 - Issue 2
Submit an article Journal homepage
139
Views
8
CrossRef citations to date
0
Altmetric
Research Article

Wear and corrosion behaviour of multiple pass friction stir processing on aluminium alloy 6061 embedding with B4C particles

Balram Yelamasettia Department of Mechanical Engineering, MLR Institute of Technology, Hyderabad, Telangana, India
,
P Naveen Kumarb Department of Mechanical Engineering, CMR Institute of Technology, Hyderabad, Telangana, India
,
Venkat Ramana Gb Department of Mechanical Engineering, CMR Institute of Technology, Hyderabad, Telangana, India
,
Kuldeep Kumar Saxenac School of Mechanical Engineering, Lovely Professional University, Phagwara;e Division of Research and Development, Lovely Professional University, Phagwara, IndiaCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0003-4064-5113
ORCID Icon,
Devender Singhd Division of Research & Innovation, Uttaranchal University, Dehradun, India
,
Amardeep Singh Kange Division of Research and Development, Lovely Professional University, Phagwara, India
&
Kahtan A. Mohammedf Department of Medical Physics, Hilla University College, Babylon
 show all
Pages 531-540 | Accepted 08 Jan 2023, Published online: 30 Jan 2023

References

  • Węglowski MS. Review friction stir processing—state of the art. Arch Civ Mech Eng. 2018;18:114–129.
  • Zadafiya K, Bandhu D, Kumari S, et al. Recent trends in drilling of carbon fiber reinforced polymers (CFRPs): a state-of-the-art review. J Manuf Processes. 2021;69:47–68.
  • Tripathi H, Bharti A, Saxena KK, et al. Improvement in mechanical properties of structural AZ91 magnesium alloy processed by friction stir processing. Adv Mater Process Technol. 2021;8:1543–1556.
  • Yelamasetti B, Kumar D, Saxena KK, et al. Experimental investigation on temperature profiles and residual stresses in GTAW dissimilar weldments of AA5052 and AA7075. Adv Mater Process Technol. 2021;8:1–14.
  • Mishra RS, Ma ZY, Charit I. Friction stir processing: a novel technique for fabrication of surface composite, Mater. Sci Eng A. 2003;341:307–310.
  • Balram Yelamasetti P, Naveen K, Venkat RG, et al. Surface modification of aluminum alloy 6061 by embedding B4C particles via friction stir processing, Mater. Res Express. 2022;9:056511.
  • Yuvaraj N, Aravindan S, Vipin. Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization. J Mater Res Technol. 2015;4:398–410.
  • Gangil N, Maheshwari S, Siddiquee AN. Multipass FSP on AA6063-T6 Al: strategy to fabricate surface composites, mater. Manuf Process. 2018;33:805–811.
  • Rejil CM, Dinaharan I, Vijay SJ, et al. Microstructure and sliding wear behavior of AA6360/(TiC+B 4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate, mater. Sci Eng A. 2012;552:336–344.
  • Soleymani S, Abdollah-Zadeh A, Alidokht SA. Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing. Wear. 2012;278-279:278–279.
  • Barati M, Abbasi M, Abedini M. The effects of friction stir processing and friction stir vibration processing on mechanical, wear and corrosion characteristics of Al6061/SiO2 surface composite. J Manuf Process. 2019;45:491–497.
  • Mabuwa S, Msomi V. Comparative analysis between normal and submerged friction stir processed friction stir welded dissimilar aluminium alloy joints. J Mater Res Technol. 2020;9:9632–9644.
  • Paidar M, Oladimeji Ojo O, Reza Ezatpour H, et al. Influence of multi-pass FSP on the microstructure, mechanical properties and tribological characterization of Al/B4C composite fabricated by accumulative roll bonding (ARB. Surf Coat Technol. 2019;361:159–169.
  • Paidar M, Bokov D, Mehrez S, et al. Improvement of mechanical and wear behavior by the development of a new tool for the friction stir processing of Mg/B4C composite. Surface and Coatings Technology; 2021p. 426. Doi:10.1016/j.surfcoat.2021.127797.
  • Moradi Faradonbeh A, Shamanian M, Edris H, et al. Friction stir welding of Al-B4C composite fabricated by accumulative roll bonding: evaluation of microstructure and mechanical behavior. J Materi Eng and Perform. 2018;27:835–846.
  • Alidokht AAZ, Soleymani S, Assadi H. Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing, mater. Des. 2011;32:2727–2733.
  • Rahsepar M, Jarahimoghadam H. The influence of multipass friction stir processing on the corrosion behavior and mechanical properties of zircon-reinforced Al metal matrix composites. Mater Sci Eng. 2016;671:214–220.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.