Natural ageing systems of 6063 Al-alloys using diverse XRD ways

References

• Mostafa A, Ibrahim H, Salah M, et al. Formation and migration of dislocations produced by plastic deformation in 1070 Al-alloy. J Exp Theor Nanotechnol Spc Res (JETNSR). 2018;2(2). DOI:10.56053/2.2.75
   Google Scholar
• Ibrahim H, Mostafa A, Salah M, et al. Recovery of deformed 1070 Al alloy by PALT & XRD. J Sci Eng Res. 2017;4(9):464–470.
   Google Scholar
• Badawi EA, Abdel-Rahman MA, Mostafa A, et al. Determination of the crystallite size & micro-strain by novel method from XRD profile. 2019. DOI:10.31058/j.ap.2019.21001.
   Google Scholar
• Šimonová P, Pabst W, Cibulková J. Crystallite size of pure tin oxide ceramics and its growth during sintering determined from XRD line broadening–a methodological case study and a practitioners’ guide. Ceram Int. 2021;47:35333–35347.
   Web of Science ®Google Scholar
• Ke B, Ye L, Zhang Y et al. Enhanced mechanical properties and corrosion resistance of an Al-Zn-Mg aluminum alloy through variable-rate non-isothermal aging. J Alloys Compd. 2022;890:161933.
   Web of Science ®Google Scholar
• Hu K, Muneer W, Zhang J, et al. Effect of beam oscillating frequency on the microstructure and mechanical properties of dissimilar laser welding of AA2060 and AA6061 alloy. Mater Sci Eng A. 2022;832:142431.
   Web of Science ®Google Scholar
• Li NY, Mao WM, Geng XX, et al. Semi-solid 6061 aluminum alloy slurry prepared by serpentine channel pouring process and its rheo-diecasting. In: Solid State Phenomena. Vol. 327. Leoben: Trans Tech Publications Ltd; 2022. pp. 279–286.
   Google Scholar
• Zhen Z, Yunlai D, Lingying Ye, et al. Effect of multi-stage aging treatments on the precipitation and mechanical properties of Al-Zn-Mg alloys. Materials Science and Engineering: A. Vol. 785; 2020. p. 139394.
   Google Scholar
• Kumar L, Kumar P, Narayan A, et al. Rietveld analysis of XRD patterns of different sizes of nanocrystalline cobalt ferrite. Int Nano Lett. 2013;3(1):8.
   Google Scholar
• Haverty D, Tofail SA, Stanton KT, et al. Structure and stability of hydroxyapatite: density functional calculation and Rietveld analysis. Phys Rev B. 2005;71(9):094103.
   Web of Science ®Google Scholar
• Pashangeh S, Alizadeh M, Amini R. Structural and corrosion behavior investigation of novel nano-quasicrystalline Al-Cr-Fe reinforced Al-matrix composites produced by ARB process. J Alloys Compd. 2022;890:161774.
   Web of Science ®Google Scholar
• Basak M, Rahman ML, Ahmed MF, et al. The use of X-ray diffraction peak profile analysis to determine the structural parameters of cobalt ferrite nanoparticles using Debye-Scherrer, Williamson-Hall, Halder-Wagner and Size-strain plot: different precipitating agent approach. J Alloys Compd. 2022;895:162694.
   Web of Science ®Google Scholar
• Manopradha N, Gowri S, Rama S, et al. Nucleation kinetics, Williamson-Hall analysis, hardness and dielectric properties of pyridine-2-carboxylictrichloroacetate single crystals. Phys B Condens Matter. 2022;624:413397.
   Web of Science ®Google Scholar
• Örnek C, Müller TŞB, Kivisäkk U, et al. Hydrogen-induced micro-strain evolution in super duplex stainless steel—Correlative high-energy X-ray diffraction, electron backscattered diffraction, and digital image correlation. Front Mater. 2022;8:793120.
   Web of Science ®Google Scholar
• Mallick P, Sahu AK, Biswal SK, et al. Investigation on structural, dielectric, thermistor parameters and negative temperature coefficient behaviour of Nd, Gd, and La-doped bismuth ferrite. Trans Electr Electron Mater. 2022;23:1–13.
   Web of Science ®Google Scholar
• Kumawat A, Chattopadhyay S, Verma RK, et al. Eu doped ZnO nanoparticles with strong potential of thermal sensing and bioimaging. Mater Lett. 2022;308:131221.
   Web of Science ®Google Scholar
• Poomathi N, Singh S, Prakash C, et al. 3D printing in tissue engineering: a state-of-the-art review of technologies and biomaterials. Rapid Prototyping J. 2021;26:1313.
   Web of Science ®Google Scholar
• Karim MR, Tariq JB, Morshed SM, et al. Environmental, economical and technological analysis of MQL-assisted machining of Al-Mg-Zr alloy using PCD Tool. Sustainability. 2021;13:7321.
   Web of Science ®Google Scholar
• Antil P, Kumar Antil S, Prakash C, et al. Multi-objective optimization of drilling parameters for orthopaedic implants. Meas Control. 2020;53(9–10):1902–1910.
   Web of Science ®Google Scholar
• Prashar G, Vasudev H. Structure-property correlation and high-temperature erosion performance of Inconel625-Al2O3 plasma-sprayed bimodal composite coatings. Surf Coat Technol. 2022;439:128450.
   Web of Science ®Google Scholar
• Vasudev H, Thakur L, Singh H, et al. Effect of addition of Al2O3 on the high-temperature solid particle erosion behaviour of HVOF sprayed Inconel-718 coatings. Mater Today Commun. 2022;30:103017.
   Web of Science ®Google Scholar
• Vasudev H, Prashar G, Thakur L, et al. Electrochemical corrosion behavior and microstructural characterization of HVOF sprayed inconel718-AL2O3 composite coatings. Surface Review and Letters, 2022, 29, 02, 2250017.
   Google Scholar
• Prashar G, Vasudev H, Thakur L, et al. Performance of thermally sprayed hydroxyapatite coatings for biomedical implants: a comprehensive review. Surf Rev Lett. 2022; online ready. doi:10.1142/S0218625X22410013.
   Web of Science ®Google Scholar
• Vasudev H, Prashar G, Thakur L, et al. Microstructural characterization and electrochemical corrosion behaviour of HVOF sprayed Alloy718-nanoAl2o3 composite coatings. Surface Topogr Metrol Prop. 2021;9:035003.
   Web of Science ®Google Scholar
• Mahmoud HAE, Mostafa M, Mostafa Darwash MAR, et al. Badawi probing properties of 6061 aluminum alloy used as cladding for nuclear reactor fuel with X-ray diffraction. AIP Conf Proc. 2020;2313:060021.
   Google Scholar