Advanced search
Publication Cover
Advances in Materials and Processing Technologies Volume 10, 2024 - Issue 2
Submit an article Journal homepage
150
Views
2
CrossRef citations to date
0
Altmetric
Research Article

Examining the mechanical response and microstructural evolution of heat-treated Al-5Si-3Cu alloy for automotive applications

O.O. Ajidea Department of Mechanical Engineering, University of Ibadan, Ibadan, NigeriaORCID Iconhttps://orcid.org/0000-0002-2819-5802
ORCID Icon,
O.C. Adedokuna Department of Mechanical Engineering, University of Ibadan, Ibadan, Nigeria
,
N. Idusuyia Department of Mechanical Engineering, University of Ibadan, Ibadan, Nigeria
,
Nikil Kumarb School of Materials Science and Technology, Indian Institute of Technology (BHU), Varanasi, IndiaCorrespondence[email protected] [email protected]
ORCID Iconhttps://orcid.org/0000-0002-0516-7673
ORCID Icon,
O.A. Aogoa Department of Mechanical Engineering, University of Ibadan, Ibadan, Nigeria;c Department of Research and Development, Standard Connections Limited, Abuja, Nigeria
,
O.J. Ajaod Department of Mechanical Engineering, Howard University, Washington, DC, USA
,
A.S. Adebayoa Department of Mechanical Engineering, University of Ibadan, Ibadan, Nigeria
,
K.K. Sexenae Division of Research and Development, Lovely Professional University, Phagwara, India
,
Ankita Joshif Division of Research & Innovation, Uttaranchal University, Dehradun, India
&
Chander Prakashg School of Mechanical Engineering, Lovely Professional University, Phagwara, India
 show all
Pages 733-744 | Accepted 17 Feb 2023, Published online: 27 Feb 2023

References

  • Meinathan S, Nitin VR. Investigation of the influence of Cu on Mg added Al-Si-Cu (A319) alloy. Int J Innov Sci Eng Tech. 2017;4(3):156–158.
  • Talamantes MA, Rodriguez A, Talamantes J, et al. Characterization of an Al–Cu cast alloy. Mater Charact. 2008;59(10):1434–1439. DOI:10.1016/j.matchar.2008.01.005
  • Onat A. Effects of artificial aging heat treatment on mechanical properties and corrosion behavior of AA6XXX aluminium alloys. J Chem Eng Mater Sci. 2018;9(2):17–23.
  • Nikanorov SP, Volkov MP, Gurin VN, et al. Structural and mechanical properties of Al–Si alloys obtained by fast cooling of a levitated melt. Mater Sci Eng A. 2005;390(1–2):63–69. DOI:10.1016/j.msea.2004.07.037
  • Zeren M, Karakulak E. Study on hardness and microstructural characteristics of sand cast Al-Si-Cu alloys. Bullet Mater Sci. 2009;32(6):617–620.
  • Molina R, Amalberto P, Rosso M. Mechanical characterization of aluminium alloys for high temperature applications Part 1: al-Si-Cu alloys. Metall Sci Technol. 2011;29(1):5–15.
  • Okayasu M, Ohkura Y, Takeuchi S, et al. A study on the mechanical properties of an Al-SiCu alloy (ADC12) produced by various casting processes. Mater Sci Eng A. 2012;543:185192.
  • Abboud J, Kayitmazbatir M, Misra A, et al. Microstructural evolution and hardness of rapidly solidified hypereutectic Al-Si surface layers produced by laser remelting. Res Sq. 2021;1–33. DOI: 10.21203/rs.3.rs-402623/v1.
  • Farkašová M, Tillová E, Chalupová M. Modification of Al-Si-Cu alloy. FME Trans. 2013;41:210–215.
  • Mohammed SH, Noory FTM. Effect of copper on tensile and hardness of Al-Si alloy in automotive application. Iraqi J Phy. 2022;20(1):72–81.
  • Ibrahim MF, Alkahtani SA, Abuhasel KA, et al. Microstructural characterization of Beryllium treated Al-Si alloy. Adv Mater Sci Eng. 2015; ( Article ID 673025): 1–10. 2015 10.1155/2015/673025
  • Gupta M, Ling S. Microstructure and mechanical properties of hypo/hyper-eutectic Al–Si alloys synthesized using a near-net shape forming technique. J Allo Comps. 1999;287(1–2):284–294.
  • Singh RK, Telang A, Das S. Microstructure and mechanical properties of Al-Si alloy in as-cast and heat treated condition. Am J Eng Res. 2016;5(8):133–137.
  • Sarraf M, Nasiri-Tabrizi B, Dabbagh A, et al. Optimized nanoporous alumina coating on AA3003-H14 aluminum alloy with enhanced tribo-corrosion performance in palm oil. Ceram Int. 2020;46(6):7306–7323. DOI:10.1016/j.ceramint.2019.11.227
  • Adeosun SO, Balogun SA, Osoba LO, et al. Effect of Cu and Zn addition on the mechanical properties of structural aluminium alloy. J Moder Manuf Technol. 2011;3(1):103–110.
  • Karthikeya GV, KCh A. Enhancement of fluidity and mechanical properties of AlSi cast alloy. Int J Innov Technol Explor Eng. 2019;9(2):246–251.
  • Jarco A, Pezda J. Effect of heat treatment process and optimization of its parameters on mechanical properties and microstructure if the AlSi11 (Fe) alloy. Mater. 2021;14(2391):1–20.
  • Lumley RN, O’donnel RG, Gunasegaram DR, et al. The role of alloy composition in the heat treatment of aluminium high pressure die castings. Metallur Sci Technol. 2008;26(2):1–10.
  • Outmani I, Fouilland-Paille L, Isselin J, et al. Effect of Si, Cu and processing parameters on Al-Si-Cu HPDC castings. J Mater Process Technol. 2017;249:559–569.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.