Evaluation of tool wears mechanism considering machining parameters and performance parameters for titanium alloy in turning operation on CNC

References

• Shaw MC, Cookson JO. Metal cutting principles. Vol. 2. Dairy Sci. Technol. CRC Taylor Fr. Gr.; 2005.
   Google Scholar
• Ezugwu EO, Bonney J, Yamane Y. An overview of the machinability of aeroengine alloys. J Mater Process Technol. 2003;134:233–253.
   Web of Science ®Google Scholar
• Dearnley PA, Grearson AN. Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318. Mater Sci Technol. 2012;2:47–58.
   Google Scholar
• Astakhov VP. The assessment of cutting tool wear. Int J Mach Tools Manuf. 2004;44:637–647.
   Web of Science ®Google Scholar
• Asiltürk I, Akkuş H. Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method. Meas J Int Meas Confed. 2011;44:1697–1704.
   Web of Science ®Google Scholar
• Sahoo AK, Sahoo B. A comparative study on performance of multilayer coated and uncoated carbide inserts when turning AISI D2 steel under dry environment. Meas J Int Meas Confed [Internet]. 2013;46:2695–2704. Available from: DOI:10.1016/j.measurement.2013.04.024.
   Google Scholar
• Zheng G, Xu R, Cheng X, et al. Effect of cutting parameters on wear behavior of coated tool and surface roughness in high-speed turning of 300M. Meas J Int Meas Confed. 2018;125:99–108.
   Google Scholar
• Khan SA, Umar M, Saleem MQ, et al. Experimental investigations on wiper inserts’ edge preparation, workpiece hardness and operating parameters in hard turning of AISI D2 steel. J Manuf Process [Internet]. 2018;34:187–196. Available from: DOI:10.1016/j.jmapro.2018.06.004.
   Web of Science ®Google Scholar
• Özel T, Karpat Y, Figueira L, et al. Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts. J Mater Process Technol. 2007;189:192–198.
   Web of Science ®Google Scholar
• Sharma J, Sidhu BS. Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil. J Clean Prod [Internet]. 2014;66:619–623. Available from: DOI:10.1016/j.jclepro.2013.11.042.
   Web of Science ®Google Scholar
• Sahoo AK, Sahoo B. Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts. Meas J Int Meas Confed [Internet]. 2012;45:2153–2165. Available from: DOI:10.1016/j.measurement.2012.05.015.
   Web of Science ®Google Scholar
• Davim JP, Figueira L. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques. Mater Des. 2007;28:1186–1191.
   Web of Science ®Google Scholar
• Onuoha OJ, Abu JO, Lawal SA, et al. Determining the effect of cutting fluids on surface roughness in turning AISI 1330 alloy steel using Taguchi method. Mod Mech Eng. 2016;06:51–59.
   Google Scholar
• Denkena B, Krödel A, Pyzcak F, et al. Recycled titanium chips as initial product for the atomisation process of powders for additive manufacturing to increase resource efficiency. SSRN Electron J. 2021;2021:89–97.
   Google Scholar
• Bai DS, Sun JF, Wang K, et al. Diffusion behavior and wear mechanism of WC/Co tools when machining of titanium alloy. Solid State Phenom. 2018;279 SSP:60–66.
   Google Scholar
• Dong E, Yu W, Cai Q, et al. High-temperature oxidation kinetics and behavior of Ti–6Al–4V alloy. Oxid Met. 2017;88:719–732.
   Google Scholar
• Buckley DH. Lubrication by solids. Wear. 1960;3:80.
   Google Scholar
• Liu Z, Welsch G. Effects of oxygen and heat treatment on the mechanical properties of alpha and beta titanium alloys. Metall Trans A. 1988;19:527–542.
   Web of Science ®Google Scholar
• Buckley DH, Johnson RL. CM Approved for Public Release.
   Google Scholar
• Yoder GR, Cooley LA, Crooker TW. Fatigue crack propagation resistance of beta-annealed Ti-6AI-4V alloys of differing interstitial oxygen contents. Metall Trans A. 1978;9:1413–1420.
   Google Scholar
• Hartung PD, Kramer BM, von Turkovich BF. Tool wear in titanium machining. CIRP Ann Manuf Technol. 1982;31:75–80.
   Google Scholar
• Tonshoff HK, Arendt C, Ben Amor R. Cutting of hardened steel. CIRP Ann Manuf Technol. 2000;49:547–566.
   Google Scholar
• Becze CE, Clayton P, Chen L, et al. High-speed five-axis milling of hardened tool steel. Int J Mach Tools Manuf. 2000;40:869–885.
   Web of Science ®Google Scholar
• Ning Y, Rahman M, Wong YS. Investigation of chip formation in high speed end milling. J Mater Process Technol. 2001;113:360–367.
   Web of Science ®Google Scholar
• Poulachon G, Moisan AL. Hard turning: chip formation mechanisms and metallurgical aspects. Am Soc Mech Eng Manuf Eng Div MED. 1999;10:219–227.
   Google Scholar
• J. Paulo Davim, editor,Machining [Internet],Spinger-Verlay London limited; 2008. Avilable from http://www.ptonline.com/article/how-to-get-better-mfg-results.
   Google Scholar
• Gupta K, Paulo Davim J. High speed machining. High-Speed Mach. 2020;41:1–311.
   Google Scholar
• Ekinovic S, Dolinsek S, Jawahir IS. Some observations of the chip formation process and the white layer formation in high speed milling of hardened steel. Mach Sci Technol. 2004;8:327–340.
   Web of Science ®Google Scholar
• Patil AS, Sunnapwar VK, Bhole KS, et al. Experimental investigation and fuzzy TOPSIS optimisation of Ti6Al4V finish milling. Adv Mater Process Technol [Internet]. 2021;8: 1–24. Available from: DOI:10.1080/2374068X.2021.1971002
   Google Scholar
• von Turkovich BF, Durham DR. Machining of titanium and its alloys. 1982;257–274.
   Google Scholar
• Taylor CM, Giovana S, Hernandez A, et al. ScienceDirect ScienceDirect ScienceDirect Cutting fluid application for titanium alloys Ti-6al-4V and Cutting fluid application for titanium alloys and Ti-10V-2Fe-3al in a finish turning process Ti-10V-2Fe-3al in a finish turning process new methodology t. Procedia CIRP [Internet]. 2018;77:441–444. Available from: DOI:10.1016/j.procir.2018.08.279.
   Google Scholar
• Namb M, Paulo D. Influence of coolant in machinability of titanium alloy (Ti-6al-4V). J Surf Eng Mater Adv Technol. 2011;01:9–14.
   Google Scholar
• Astkahov VP, Outeiro JC. Finite Element Modelling, in: Machining. In: Davim JP, editor. Fundamentals and recent advances. Springer-Verlag; 2008.
   Google Scholar
• Davim JP, António CAC. Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model. J Mater Process Technol. 2001;112:78–82.
   Web of Science ®Google Scholar
• Maranchik J JR, Snider RE. Machining of titanium alloys. 1968.
   Google Scholar
• Paulo Davim J, Figueira L. Comparative evaluation of conventional and wiper ceramic tools on cutting forces, surface roughness, and tool wear in hard turning AISI D2 steel. Proc Inst Mech Eng Part B J Eng Manuf. 2007;221:625–633.
   Google Scholar
• Davim JP. Study of drilling metal-matrix composites based on the Taguchi techniques. J Mater Process Technol. 2003;132:250–254.
   Web of Science ®Google Scholar
• Davim JP. Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays. J Mater Process Technol. 2003;132:340–344.
   Web of Science ®Google Scholar
• Suresh R, Basavarajappa S, Gaitonde VN, et al. State-of-the-art research in machinability of hardened steels. Proc Inst Mech Eng Part B J Eng Manuf. 2013;227:191–209.
   Google Scholar
• Davim JP. Statistical and computational techniques in manufacturing. Stat Comput Tech Manuf. 2012.
   Google Scholar
• Elbestawi MA, Chen L, Becze CE, et al. High-speed milling of dies and molds in their hardened state. CIRP Ann Manuf Technol. 1997;46:57–62.
   Google Scholar
• Bouzakis KD, Michailidis N, Skordaris G, et al. Effect of the cutting edge radius and its manufacturing procedure, on the milling performance of PVD coated cemented carbide inserts. CIRP Ann Manuf Technol. 2002;51:61–64.
   Web of Science ®Google Scholar