Experimental investigation on fabrication and characterisation of Mg-Al₂O₃ surface composites

References

• Anand N, S SK. Development and influence of tribomechanical properties on magnesium based hybrid metal matrix composites-a review. Mater Res Express. 2020 Mar;7(3):036520.
   Web of Science ®Google Scholar
• Vignesh Kumar M, Padmanaban G, Balasubramanian V. Role of tool pin profiles on wear characteristics of friction stir processed magnesium alloy ZK60/silicon carbide surface composites. Materialwissenschaft und Werkstofftechnik. 2020 Feb;51(2):140–152.
   Web of Science ®Google Scholar
• Mazaheri Y, Jalilvand MM, Heidarpour A, et al. Tribological behavior of AZ31/ZrO2 surface nanocomposites developed by friction stir processing. Tribol Int. 2020 Mar;143:106062.
   Web of Science ®Google Scholar
• Ahmed S, Malik Manroo V, Ahmad B. Surface moderation and composite fabrication of die-cast magnesium alloys via friction stir processing: a review. Adv Mater Process Technol. 2021 Aug;8(4):1–21.
   Google Scholar
• Venkataiah M, Anup Kumar T, Venkata Rao K, et al. Effect of grain refinement on corrosion rate, mechanical and machining behavior of friction stir processed ZE41 Mg alloy. Trans Indian Inst Met. 2019 Jan;72(1):123–132.
   Web of Science ®Google Scholar
• Thomas WM, Nicholas ED, Needham JC, et al., “GB Patent application no. 9125978.8, December 1991,” Google Scholar, 1995.
   Google Scholar
• Mishra RS, Ma ZY. Friction stir welding and processing. Mater Sci Eng R Rep. 2005 Aug;50(1–2):1–78.
   Web of Science ®Google Scholar
• Parray MR, Khan NZ, Maqbool A. Fabrication and characterization of magnesium based surface composites with hybrid reinforcements by friction stir processing: a review. Mater Today Proc. 2021;46:6507–6512.
   Google Scholar
• Patel V, Li W, Xu Y. Stationary shoulder tool in friction stir processing: a novel low heat input tooling system for magnesium alloy. Mater Manuf Processes. 2019 Jan;34(2):177–182.
   Web of Science ®Google Scholar
• Bagheri B, Abdollahzadeh A, Sharifi F, et al., “The role of vibration and pass number on microstructure and mechanical properties of AZ91/SiC composite layer during friction stir processing,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, p. 095440622110242, Jul. 2021, DOI:10.1177/09544062211024281
   Google Scholar
• Faraji G, Dastani O, Mousavi SAAA. Effect of process parameters on microstructure and micro-hardness of AZ91/Al2O3 surface composite produced by FSP. J Mater Eng Perform. 2011 Dec;20(9):1583–1590. DOI:10.1007/s11665-010-9812-0.
   Web of Science ®Google Scholar
• Singh N, Singh J, Singh B, et al. Wear behavior of B4C reinforced AZ91 matrix composite fabricated by FSP. Mater Today Proc. 2018;5(9):19976–19984.
   Google Scholar
• Khayyamin D, Mostafapour A, Keshmiri R. The effect of process parameters on microstructural characteristics of AZ91/SiO2 composite fabricated by FSP. Materials Science & Engineering A. 2013 Jan;559:217–221.
   Web of Science ®Google Scholar
• Qiao K, Zhang T, Wang K, et al. Mg/ZrO2 metal matrix nanocomposites fabricated by friction stir processing: microstructure, mechanical properties, and corrosion behavior. Front Bioeng Biotechnol. 2021 Mar;9. DOI:10.3389/fbioe.2021.605171
   Web of Science ®Google Scholar
• Seifiyan H, Heydarzadeh Sohi M, Ansari M, et al. Influence of friction stir processing conditions on corrosion behavior of AZ31B magnesium alloy. J Magnesium Alloys. 2019 Dec;7(4):605–616.
   Web of Science ®Google Scholar
• Kumar DS, Sasanka CT, Ravindra K, et al. Magnesium And its alloys in automotive applications – a review. Am J Mater Sci Tecnol. 2015. DOI:10.7726/ajmst.2015.1002
   Google Scholar
• Vasu C, Venkateswarlu B, Venkateswara Rao R, et al. Microstructure, mechanical and corrosion properties of friction stir processed ZE41 Mg alloy. Mater Today Proc. 2019;15:50–56.
   Google Scholar
• Dinaharan I, Vettivel SC, Balakrishnan M, et al. Influence of processing route on microstructure and wear resistance of fly ash reinforced AZ31 magnesium matrix composites. J Magnesium Alloys. 2019 Mar;7(1):155–165.
   Web of Science ®Google Scholar
• Bodaghi M, Dehghani K. Friction stir welding of AA5052: the effects of SiC nano-particles addition. Int J Adv Manuf Technol. 2017 Feb;88(9–12):2651–2660.
   Web of Science ®Google Scholar
• Singh T, Tiwari SK, Shukla DK. Effects of Al 2 O 3 nanoparticles volume fractions on microstructural and mechanical characteristics of friction stir welded nanocomposites. Nanocomposites. 2020 Apr;6(2):76–84.
   Web of Science ®Google Scholar
• Ahmadkhaniha D, Heydarzadeh Sohi M, Salehi A, et al. Formations of AZ91/Al2O3 nano-composite layer by friction stir processing. J Magnesium Alloys. 2016 Dec;4(4):314–318.
   Web of Science ®Google Scholar
• Thirugnanasambandham T, Chandradass J, Sethupathi PB, et al. Experimental study of wear characteristics of Al2O3 reinforced magnesium based metal matrix composites. Mater Today Proc. 2019;14:211–218.
   Google Scholar
• Patle H, Sunil BR, Dumpala R. Machining characteristics, wear and corrosion behavior of AZ91 magnesium alloy - fly ash composites produced by friction stir processing. Materialwissenschaft und Werkstofftechnik. 2021 Jan;52(1):88–99.
   Web of Science ®Google Scholar
• Eskandari H, Taheri R, Khodabakhshi F. Friction-stir processing of an AA8026-TiB 2 -Al 2 O 3 hybrid nanocomposite: microstructural developments and mechanical properties. Materials Science & Engineering A. 2016 Apr;660:84–96.
   Web of Science ®Google Scholar
• Dawson H, Serrano M, Cater S, et al. Impact of friction stir welding on the microstructure of ODS steel. J Nucl Mater. 2017 Apr;486:129–137.
   Web of Science ®Google Scholar
• Lu D, Jiang Y, Zhou R. Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing. Wear. 2013 Jul;305(1–2):286–290.
   Web of Science ®Google Scholar
• Patle H, Ratna Sunil B, Dumpala R. Sliding wear behavior of AZ91/B 4 C surface composites produced by friction stir processing. Mater Res Express. 2020 Jan;7(1):016586.
   Web of Science ®Google Scholar
• Tripathi H, Bharti A, Saxena KK, et al. Improvement in mechanical properties of structural AZ91 magnesium alloy processed by friction stir processing. Adv Mater Process Technol. 2021 Aug;8(sup3):1–14.
   Google Scholar
• Kumar H, Prasad R, Srivastava A, et al. Utilisation of industrial waste (Fly ash) in synthesis of copper based surface composite through friction stir processing route for wear applications. J Clean Prod. 2018 Sep;196:460–468.
   Web of Science ®Google Scholar
• Farhat ZN, Ding Y, Northwood DO, et al. Effect of grain size on friction and wear of nanocrystalline aluminum. Materials Science & Engineering A. 1996 Feb;206(2):302–313.
   Web of Science ®Google Scholar
• Ahmadifard S, Shahin N, Vakili-Azghandi M, et al. Microstructure, mechanical, and tribological properties of Al7075-T6/Ti3AlC2/Al2O3 surface hybrid nanocomposite produced by friction stir processing: a comparison of hybrid ratio. Int J Adv Manuf Technol. 2022 Feb;118(7–8):2205–2220.
   Web of Science ®Google Scholar