References
- Paul SK. Controlling factors of forming limit curve: a review. Adv Ind Manuf Eng. 2021;2:100033.
- Stoughton TB, Zhu X. Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD. Int J Plast. 2004;20(8–9):1463–1486.
- Kumar A, Gautam V. Formability of tailor welded blanks of high strength steel: a review. Mater Today: Proc. 2021;46:6547–6551.
- GUAN YP, GUAN Y-P. Theoretical prediction and experimental investigation on formability of tailor-welded blanks. Trans Nonferrous Met Soc China. 2016;26(1):228–236.
- Safdarian R. Forming limit diagram prediction of tailor welded blank by modified M–K model. Mech Res Commun. 2015;67:47–57.
- Shinge VR, Dabade UA. Experimental investigation on forming limit diagram of mild carbon steel sheet. Procedia Manuf. 2018;20:141–146.
- Kumar DR. Formability analysis of extra-deep drawing steel. J Mater Process Technol. 2002;130:31–41.
- Narayanasamy R, Narayanan CS. Experimental analysis and evaluation of forming limit diagram for interstitial free steels. Materials & Design. 2007;28(5):1490–1512.
- Kinsey B, Wu X, Eds. Tailor welded blanks for advanced manufacturing. UK: Elsevier; 2011.
- Pallett RJ, Lark RJ. The use of tailored blanks in the manufacture of construction components. J Mater Process Technol. 2001;117(1–2):249–254.
- Trimming LIA. Handbook of laser materials processing. Chapter. 2001;17:583–588.
- Rojek J, Hyrcza-Michalska M, Bokota A, et al. Determination of mechanical properties of the weld zone in tailor-welded blanks. Arch Civil Mech Eng. 2012;12(2):156–162.
- Abdullah K, Wild PM, Jeswiet JJ, et al. Tensile testing for weld deformation properties in similar gage tailor welded blanks using the rule of mixtures. J Mater Process Technol. 2001;112(1):91–97.
- Babic Z, Aleksandrović S, Stefanović M, et al. Determination of tailor welded blanks formability characteristics. Journal for Technology of Plasticity. 2008;33:1–2.
- Chan SM, Chan LC, Lee TC. Tailor-welded blanks of different thickness ratios effects on forming limit diagrams. J Mater Process Technol. 2003;132(1–3):95–101.
- Riahi M, Amini A. Effect of different combinations of tailor-welded blank coupled with change in weld location on mechanical properties by laser welding. Int J Adv Manuf Technol. 2013;67(5):1937–1945.
- Gaied S, Roelandt JM, Pinard F, et al. Experimental and numerical assessment of Tailor-Welded Blanks formability. J Mater Process Technol. 2009;209(1):387–395.
- Asadi P, Aliha MRM, Akbari M, et al. Multivariate optimization of mechanical and microstructural properties of welded joints by FSW method. Eng Fail Anal. 2022;140:106528.
- Bhargava M, Tewari A, Mishra SK. Forming limiT diagram of advanced high strength steels (AHSS) based on strain-path diagram. Materials & Design. 2015;85:149–155.
- Lakshmi AA, Rao C, Kotkunde N, et al. Forming limit diagram of AISI 304 austenitic stainless steel at elevated temperature: experimentation and modelling. Int J Mech Eng Technol (IJMET). 2018;9(12):403–407.
- Akbari M, Rahimi Asiabaraki H. Modeling and optimization of tool parameters in friction stir lap joining of aluminum using RSM and NSGA II. Weld Int. 2023;37(1):21–33. DOI:10.1080/09507116.2022.2164530
- Campos HB, Butuc MC, Gracio JJ, et al. Theorical and experimental determination of the forming limit diagram for the AISI 304 stainless steel. J Mater Process Technol. 2006;179(1–3):56–60.
- Habibi M, Hashemi R, Tafti MF, et al. Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding. J Manuf Processes. 2018;31:310–323.
- Karami V, Dariani BM, Hashemi R. Investigation of forming limit curves and mechanical properties of 316 stainless steel/St37 steel tailor-welded blanks produced by tungsten inert gas and friction stir welding method. CIRP J Manuf Sci Technol. 2021;32:437–446.
- Singh AK, Narasimhan K. Determination and predication of formability on 22MnB5 steel under hot stamping conditions using Gleeble. Adv Mater Process Technol. 2021;8(2):1–13.