Mechanical and tribological assessment of AA7075 reinforced Si₃N₄/TaC/Ti hybrid metal matrix composites processed through stir casting process

References

• Raja R, Jannet S, Reji S, et al. Analysis of mechanical and wear properties of Al2O3 + SiC + B4C/AA5083 hybrid metal matrix composite done by stir casting route. Mater Today Proc. 2020;26:3–7.
   Google Scholar
• Zhou MY, Ren LB, Fan LL. Progress in research on hybrid metal matrix composites. J Alloys Compd. 2020;838:838.
   Web of Science ®Google Scholar
• Jayendra B, Sumanth D, Dinesh G, et al. Mechanical characterization of stir cast Al-7075/B4C/graphite reinforced hybrid metal matrix composites. Mater Today Proc. 2020;21:1104–1110.
   Google Scholar
• Velavan K, Palanikumar K, Natarajan E, et al. Implications on the influence of mica on the mechanical properties of cast hybrid (Al+10%B4C+Mica) metal matrix composite. J Mater Res Technol. 2021;10:99–109.
   Google Scholar
• Rao VR, Chowdary JR, Gudapati SPK. Fabrication and investigation on mechanical properties of (AA7075/Cr3C2) metal matrix composites. Mater Today Proc. 2020;23:513–517.
   Google Scholar
• Pariyar A, Perugu CS, Dash K, et al. Microstructure and mechanical behavior of high toughness Al-based metal matrix composite reinforced with in-situ formed nickel aluminides. Mater Charact. 2021;171:110776.
   Web of Science ®Google Scholar
• Coyal A, Yuvaraj N, Butola R, et al. An experimental analysis of tensile, hardness and wear properties of aluminium metal matrix composite through stir casting process. SN Appl Sci. 2020;2(5):1–10.
   Web of Science ®Google Scholar
• Sethi D, Kumar S, Choudhury S, et al. Synthesis and characterization of AA7075/TiB2 aluminum matrix composite formed through stir casting method. Mater Today Proc. 2020;26:1908–1913.
   Google Scholar
• Zhengwu J, Zilong D, Xinping Z, et al. Increased strength and related mechanisms for mortars at cryogenic temperatures. Cryogenics. 2018;94:5–13.
   Web of Science ®Google Scholar
• Geng R, Tian WS, Zhao QL, et al. Superior cryogenic tensile strength and ductility of in situ Al–Cu matrix composite reinforced with 0.3 wt% nano-sized TiCp. Adv Eng Mater. 2018;20(7):1–4.
   Web of Science ®Google Scholar
• Zheng C, Yu W. Effect of low-temperature on mechanical behavior for an AISI 304 austenitic stainless steel. Mater Sci Eng A. 2018;710:359–365.
   Web of Science ®Google Scholar
• Reddy TP, Kishore SJ, Theja PC, et al. Development and wear behavior investigation on aluminum-7075/B4C/fly ash metal matrix composites. Adv Compos Hybrid Compos. 2020;3:255–265.
   Google Scholar
• Ahamad N, Mohammad A, Sadasivuni KK, et al. Structural and mechanical characterization of stir cast Al–Al2O3–TiO2 hybrid metal matrix composites. J Compos Mater. 2020;54(21):2985–2997.
   Web of Science ®Google Scholar
• N DV, B BK, M GK. Microstructure, mechanical properties and fracture mechanisms of ZrB2 ceramic reinforced A7075 composites fabricated by stir casting. Mater Today Commun. 2020;25:101289.
   Web of Science ®Google Scholar
• Devaganesh S, Dinesh Kumar PK, Venkatesh N, et al. Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites. J Mater Res Technol. 2020;9:3759–3766.
   Google Scholar
• Kumar PSSR, Mashinini PM. Dry sliding wear behaviour of AA7075 – Al2SiO5 layered nanoparticle material at different temperature condition. Silicon. 2020.
   Web of Science ®Google Scholar
• Jawahar Chandra C, Radhika N, Bhatija KA, et al. “Fabrication of light-weight Al LM13/TiS2 metal matrix composites and investigation of its wear characteristics. Part Sci Technol. 2019;37(4):456–463.
   Web of Science ®Google Scholar
• Das S, Chandrasekaran M, Samanta S, et al. Fabrication and tribological study of AA6061 hybrid metal matrix composites reinforced with SiC/B4C nanoparticles. Ind Lubr Tribol. 2019;71(1):83–93.
   Web of Science ®Google Scholar
• Adediran AA, Akinwande AA, Balogun OA, et al. Optimization studies of stir casting parameters and mechanical properties of TiO2 reinforced Al 7075 composite using response surface methodology. Sci Rep. 2021;11(1):1–20.
   PubMed Web of Science ®Google Scholar
• Imran M, Khan ARA. Characterization of Al-7075 metal matrix composites: a review. J Mater Res Technol. 2019;8(3):3347–3356.
   Google Scholar
• Al-Salihi HA, Mahmood AA, Alalkawi HJ. Mechanical and wear behavior of AA7075 aluminum matrix composites reinforced by Al2O3 nanoparticles. Nanocomposites. 2019;5(3):1–7.
   Web of Science ®Google Scholar
• Bhoi NK, Singh H, Pratap S. Developments in the aluminum metal matrix composites reinforced by micro/nano particles – a review. J Compos Mater. 2020;54(6):813–833.
   Web of Science ®Google Scholar
• Bhowmik A, Chakraborty D, Dey D, et al. Investigation on wear behaviour of Al7075-SiC metal matrix composites prepared by stir casting. Mater Today Proc. 2020;26:2–5.
   Google Scholar
• Kumar Sharma A, Bhandari R, Aherwar A, et al. A study of fabrication methods of aluminum based composites focused on stir casting process. Mater Today Proc. 2020;27:0–4.
   Google Scholar
• Kumar VV, Raja K, Chandrasekaran K, et al. Microstructural characterization and mechanical properties of Al7075/BN metal matrix composites prepared by conventional casting method. Mater Res Express. 2019;6(6). DOI:10.1088/2053-1591/ab07e2
   Web of Science ®Google Scholar
• Manikandan R, Arjunan TV, Akhil AR. Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al7075) hybrid metal matrix composite. Composites. 2019;183:107668.
   Google Scholar
• Mathan Kumar N, Senthil Kumaran S, Kumaraswamidhas LA. “Aerospace application on Al 2618 with reinforced – Si3N4, AlN and ZrB2in-situ composites. J Alloys Compd. 2016;672:238–250.
   Web of Science ®Google Scholar
• Ramadoss N, Pazhanivel K, Anbuchezhiyan G. Synthesis of B4C and BN reinforced Al7075 hybrid composites using stir casting method. J Mater Res Technol. 2020;9:2–9.
   Google Scholar
• Mistry JM, Gohil PP. Experimental investigations on wear and friction behaviour of Si3N4p reinforced heat-treated aluminium matrix composites produced using electromagnetic stir casting process. Compos B: Eng. 2019;161:190–204.
   Web of Science ®Google Scholar
• Reddy PS, Kesavan R, Vijaya Ramnath B. Investigation of mechanical properties of aluminium 6061-silicon carbide, boron carbide metal matrix composite. Silicon. 2018;10(2):495–502.
   Web of Science ®Google Scholar
• Irfan M, Haq U, Anand A. Dry sliding friction and wear behavior of AA7075-Si3N4 composite. Silicon. 2018;10:1819–1829.
   Web of Science ®Google Scholar
• Saravanan C, Sathivel P, Kajendirakumar S, et al. Mechanical and wear behaviour of AA7075 alloy reinforced with graphite. Mater Today Proc. 2020;1:1–4.
   Google Scholar
• Raj N, Radhika N. Tribological characteristics of LM13/Si3N4/Gr hybrid composite at elevated temperature. Silicon. 2018;11:947–960.
   Web of Science ®Google Scholar
• Subramaniam B, Natarajan B, Kaliyaperumal B, et al. Wear behaviour of aluminium 7075—boron carbide- coconut shell fly ash reinforced hybrid metal matrix composites. Mater Res Express. 2019;6(10):1065d3.
   Web of Science ®Google Scholar