Periodic advancement of aluminium metal matrix composites: tribo-mechanical performance, corrosion properties, challenges and future

References

• Fenghong C, Chang C, Zhenyu W, et al. Effects of silicon carbide and tungsten carbide in aluminium metal matrix composites. Silicon. 2019;11(6):2625–2632. DOI:https://doi.org/10.1007/s12633-018-0051-6
   Web of Science ®Google Scholar
• Surya MS, Gugulothu SK. Fabrication, mechanical and wear characterization of silicon carbide reinforced Aluminium 7075 metal matrix composite. Silicon. 2022;14(5):2023–2032.
   Web of Science ®Google Scholar
• Sam M, Radhika N, Saleh B. Influence of boride, oxide, and carbide ceramics as secondary reinforcement in T6-A333 functionally graded hybrid composites. Ceram Int. 2022;48(19):28528–28547.
   Web of Science ®Google Scholar
• Bodunrin MO, Alaneme KK, Chown LH. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. J Mater Res Technol. 2015;4(4):434–445.
   Google Scholar
• Sriram KK, Radhika N, Sam M, et al. Studies on adhesive wear characteristics of centrifugally cast functionally graded ceramic reinforced composite. Int J Automot Mech Eng. 2020;17(4):8274–8282. DOI:10.15282/ijame.17.4.2020.05.0625
   Web of Science ®Google Scholar
• Mallick PK. Advanced materials for automotive applications: an overview. Adv Mater Automot Eng. 2012;1:5–27.
   Google Scholar
• Sharma AK, Bhandari R, Aherwar A, et al. Matrix materials used in composites: a comprehensive study. Mater Today Proc. 2020;21:1559–1562.
   Google Scholar
• Abenojar J, Martínez MA, Velasco F, et al. Effect of boron carbide filler on the curing and mechanical properties of an epoxy resin. J Adhes. 2009;85(4–5):216–238. DOI:10.1080/00218460902881782
   Web of Science ®Google Scholar
• Koli DK, Agnihotri G, Purohit R. Advanced aluminium matrix composites: the critical need of automotive and aerospace engineering fields. Mater Today Proc. 2015;2(4–5):3032–3041.
   Google Scholar
• Kathiresan M, Sornakumar T. Friction and wear studies of die cast aluminum alloy‐aluminum oxide‐reinforced composites. Ind Lubr Tribol. 2010;62(6):361–371.
   Web of Science ®Google Scholar
• Rajesh S, Krishna AG, Raju PRM, et al. Statistical analysis of dry sliding wear behavior of graphite reinforced aluminum MMCs. Procedia Mater Sci. 2014;6:1110–1120.
   Google Scholar
• Tshephe TS, Akinwamide SO, Olevsky E, et al. Additive manufacturing of titanium-based alloys-A review of methods, properties, challenges, and prospects. Heliyon. 2022;8(3):e09041. DOI:https://doi.org/10.1016/j.heliyon.2022.e09041
   PubMed Web of Science ®Google Scholar
• Dey A, Pandey KM. Magnesium metal matrix composites-a review. Rev Adv Mater Sci. 2015;42:58–67.
   Web of Science ®Google Scholar
• Habibur Rahman MD, Mamun Al Rashed HM. Characterization of silicon carbide reinforced aluminum matrix composites. Procedia Eng. 2014;90:103–109.
   Google Scholar
• Radhika N, Raghu R. Evaluation of dry sliding wear characteristics of LM 13 Al/B4C composites. Tribol Ind. 2015;37:20–28.
   Google Scholar
• Prasad DS, Shoba C, Ramanainah N. Investigations on mechanical properties of aluminium hybrid composite. J Mater Res Technol. 2014;3(1):79–85.
   Google Scholar
• Samal P, Vundavilli PR, Meher A, et al. Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties. J Manuf Process. 2020;59:131–152.
   Web of Science ®Google Scholar
• Sahu PS, Banchhor R. Fabrication methods used to prepare Al metal matrix composites-A review. Int Res J Eng Technol. 2016;3:123–132.
   Google Scholar
• Kaczmar JW, Pietrzak K, Włosiński W. The production and application of metal matrix composite materials. J Mater Process Technol. 2000;106(1–3):58–67.
   Web of Science ®Google Scholar
• Rohatgi P. Cast aluminum-matrix composites for automotive applications. J Miner Met Mater Soc. 1991;43(4):10–15.
   Web of Science ®Google Scholar
• Maurya M, Kumar S, Bajpai V, et al. Process parameters, development and applications of stir cast composite: a review. Mater Test. 2020;62(2):196–208. DOI:10.3139/120.111472
   Web of Science ®Google Scholar
• Chakrapani P, Suryakumari TSA. Mechanical properties of aluminium metal matrix composites-A review. Mater Today Proc. 2021;45:5960–5964.
   Google Scholar
• Saravanan C, Subramanian K, Krishnan VA, et al. ‏Ultrasonic attenuation of (Al-SiC) particulate aluminum matrix composite. Mech Mech Eng. 2015;23(1):23–30. DOI:10.33899/rengj.2015.101024
   Google Scholar
• Radhika N, Subramanian R. Effect of reinforcement on wear behaviour of aluminium hybrid composites. Tribol Mater Surf Interfaces. 2013;7(1):36–41.
   Google Scholar
• Pramanik A. Effects of reinforcement on wear resistance of aluminum matrix composites. Trans Nonferrous Met Soc China. 2016;26(2):348–358.
   Web of Science ®Google Scholar
• Ramnath BV, Elanchezhian C, Annamalai RM. Aluminium metal matrix composites - a review. Rev Adv Mater Sci. 2014;38:55–60.
   Web of Science ®Google Scholar
• Baghchesara MA, Abdizadeh H. Microstructural and mechanical properties of nanometric magnesium oxide particulate-reinforced aluminum matrix composites produced by powder metallurgy method. J Mech Sci Technol. 2012;26(2):367–372.
   Web of Science ®Google Scholar
• Srinivas PNS, Babu PR, Balakrishna B. Effect of silicon carbide, magnesium oxide as reinforcing elements and zinc sterate as binding agent in the characterization of Al functionally graded materials for automotive applications. Mater Today Proc. 2020;27:460–466.
   Google Scholar
• Sharma VK, Singh RC, Chaudhary R. Effect of flyash particles with aluminium melt on the wear of aluminium metal matrix composites. Eng Sci Technol An Int J. 2017;20(4):1318–1323.
   Google Scholar
• Gikunoo E, Omotoso O, Oguocha INA. Effect of fly ash particles on the mechanical properties of aluminium casting alloy A535. Mater Sci Technol. 2005;21(2):143–152.
   Web of Science ®Google Scholar
• Prasad SV, Asthana R. Aluminum metal–matrix composites for automotive applications: tribological considerations. Tribol Lett. 2004;17(3):445–453.
   Web of Science ®Google Scholar
• Hallem AH, Jasim TA, Radhi NS. Effect of alumina reinforcement on some mechanical properties of aluminum matrix composites produced by stir casting process. Int J Civ Eng Technol. 2018;9:1271–1280.
   Google Scholar
• Saleh BI, Ahmed MH. Development of functionally graded tubes based on pure Al/Al2O3 metal matrix composites manufactured by centrifugal casting for automotive applications. Met Mater Int. 2020;26(9):1430–1440.
   Web of Science ®Google Scholar
• Parveen A, Chauhan NR, Suhaib M. Study of Si3N4 reinforcement on the morphological and tribo-mechanical behaviour of aluminium matrix composites. Mater Res Express. 2019;6(4):042001.
   Web of Science ®Google Scholar
• Bhaumik M, Maity K. Fabrication and characterization of the Al6063/5% ZrO2/5% Al2O3 composite. IOP Conf Ser Mater Sci Eng. 2017;178:012011.
   Google Scholar
• Omrani E, Moghadam AD, Menezes PL, et al. Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review. Int J Adv Manuf Syst. 2016;83(1–4):325–346. DOI:10.1007/s00170-015-7528-x
   Web of Science ®Google Scholar
• Naveen E, Ramanan N, Arvind R, et al. Analysis of mechanical and wear properties of Al-SiO2 composite material. J Innov Mech Eng. 2018;1:1–5.
   Google Scholar
• He N, Zhang J, Jin Y, et al. Preparation, microstructures and mechanical properties of in-situ TiB2/Al composites by mechanical stirring and subsequent ultrasonic treatment. Mater Res Express. 2019;6(11):116553. DOI:10.1088/2053-1591/ab471f
   Google Scholar
• Samal P, Raj R, Mandava RK. Effect of red mud on mechanical and microstructural characteristics of aluminum matrix composites. In: Li L, Pratihar D, Chakrabarty S Mishra P, et al., editors. Advances in materials and manufacturing engineering, lecture notes in mechanical engineering. Singapore: Springer; 2020. pp. 75–82. DOI:10.1007/978-981-15-1307-7_8
   Google Scholar
• Dey D, Bhowmik A, Biswas A. Effect of SiC content on mechanical and tribological properties of Al2024-SiC composites. Silicon. 2022;14(1):1–12.
   Web of Science ®Google Scholar
• Ibrahim IA, Mohamed FA, Lavernia EJ. Particulate reinforced metal matrix composites — a review. J Mater Sci. 1991;26(5):1137–1156.
   Web of Science ®Google Scholar
• Vidal-Sétif MH, Lancin M, Marhic C, et al. On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites. Mater Sci Eng A. 1999;272(2):321–333.
   Web of Science ®Google Scholar
• Prasad DS, Krishna AR. Production and mechanical properties of A356/RHA composites. Int J Adv Sci Technol. 2011;33:51–58.
   Google Scholar
• Sharma P, Sharma S, Khanduja D. Production and some properties of Si3N4 reinforced aluminium alloy composites. J Asian Ceram Soc. 2015;3(3):352–359.
   Web of Science ®Google Scholar
• Joshua K, Santhiyagu V, Ramkumar P, et al. Investigation of microstructure and mechanical properties of AA7068 reinforced with MgO prepared using powder metallurgy. In: 1st International Conference on Recent Advances in Aerospace Engineering, ICRAAE 17; Coimbatore, India, 2017. p. 1–6.
   Google Scholar
• Mohanakumara KC, Rajashekar H, Ghanaraja S, et al. Development and mechanical properties of SiC reinforced cast and extruded Al based metal matrix composite. Procedia Mater Sci. 2014;5:934–943.
   Google Scholar
• Arunachalam R, Krishnan PK, Muraliraja R. A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities. J Manuf Process. 2019;42:213–245.
   Web of Science ®Google Scholar
• Awasthi A, Panwar N, Wadhwa AS, et al. Mechanical Characterization of hybrid aluminium composite-a review. Mater Today Proc. 2018;5(14):27840–27844.
   Google Scholar
• Loh YR, Sujan D, Rahman ME, et al. Sugarcane bagasse—The future composite material: a literature review. Resour Conserv Recycl. 2013;75:14–22.
   Web of Science ®Google Scholar
• Kumar TS, Shalini S, Kumar KK, et al. Bagasse Ash reinforced A356 alloy composite: synthesis and characterization. Mater Today Proc. 2018;5(2):7123–7130. DOI:10.1016/j.matpr.2017.11.377
   Google Scholar
• Joharudin NF, Latif NA, Mustapa MS, et al. Physical properties and hardness of treated amorphous silica as reinforcement of AA7075 recycled aluminum chip. IOP Conf Ser Mater Sci Eng. 2020;824(1):012015.
   Google Scholar
• Alaneme KK, Adewale TM. Influence oF rice husk Ash – Silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites. Tribol Ind. 2013;35:163–172.
   Google Scholar
• Sirahbizu Yigezu B, Mahapatra M, Jha P. Influence of reinforcement type on microstructure, hardness, and tensile properties of an aluminum alloy metal matrix composite. J Miner Mater Charact Eng. 2013;1(04):124–130.
   Google Scholar
• Alaneme K. Corrosion behaviour of heat-treated Al-6063/SiCp composites immersed in 5 wt% NaCl solution. Leonardo J Sci. 2011;18:55–64.
   Google Scholar
• Islam A, Dwivedi SP, Yadav R, et al. Development of aluminium based composite by utilizing industrial waste and agro-waste material as reinforcement particles. J Inst Eng India Ser D. 2021;102(2):317–330.
   Google Scholar
• Verma N, Vettivel SC. Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite. J Alloys Compd. 2018;741:981–998.
   Web of Science ®Google Scholar
• Dwivedi SP, Mishra VR. Physico-chemical, mechanical and thermal behaviour of agro-waste RHA-Reinforced green emerging composite material. Arab J Sci Eng. 2019;44(9):8129–8142.
   Web of Science ®Google Scholar
• Shaikh MB, Raja S, Ahmed M, et al. Rice husk ash reinforced aluminium matrix composites: fabrication, characterization, statistical analysis and artificial neural network modelling. Mater Res Express. 2019;6(5):056518.
   Web of Science ®Google Scholar
• Praveen KB, Birru AK. Microstructure and mechanical properties of aluminum metal matrix composites with addition of bamboo leaf ash by stir casting method. Rajshahi Univ J Sci. 2017;44:9–18.
   Google Scholar
• Olorunyolemi OC, Ogunsanya OA, Akinwande AA, et al. Enhanced mechanical behaviour and grain characteristics of aluminium matrix composites by cold rolling and reinforcement addition (Rice husk ash and Coal fly ash). P I Mech Eng. 2022;13:09544089221124462.
   Google Scholar
• Rodriguez-Castro R, Kelestemur MH. Processing and microstructural characterization of functionally gradient Al A359/SiCp composite. J Mater Sci. 2002;37(9):1813–1821.
   Web of Science ®Google Scholar
• Kumar SS, Bai VS, Rajasekharan T. Aluminium matrix composites by pressure-less infiltration: the metallurgical and physical properties. J Phys D Appl Phys. 2008;41(10):105403.
   Web of Science ®Google Scholar
• Ibrahim MF, Ammar HR, Samuel AM, et al. Mechanical properties and fracture of Al–15 vol.-% B4C based metal matrix composites. Int J Cast Met Res. 2014;27(1):7–14.
   Web of Science ®Google Scholar
• Lai J, Zhang Z, Chen XG. Precipitation strengthening of Al–B4C metal matrix composites alloyed with Sc and Zr. J Alloys Compd. 2013;552:227–235.
   Web of Science ®Google Scholar
• Abbasipour B, Niroumand B, Vaghefi SMM. Compocasting of A356-CNT composite. Trans Nonferrous Met Soc China. 2010;20(9):1561–1566.
   Web of Science ®Google Scholar
• Pandiyarajan R, Maran P, Marimuthu S, et al. Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C. J Mech Sci Technol. 2017;31(10):4711–4717. DOI:10.1007/s12206-017-0917-3
   Web of Science ®Google Scholar
• Samuel CJ, Ramesh A, Krishnamoorthy K, et al. Investigation of the mechanical properties of a squeeze-cast LM6 aluminium alloy reinforced with a zinc-coated steel-wire mesh. Mater Tehnol. 2018;52(2):125–131. DOI:10.17222/mit.2017.019
   Web of Science ®Google Scholar
• Alaneme KK, Olusola JA. Microstructure and mechanical behavior of stir-cast Zn–27Al based composites reinforced with rice husk ash, silicon carbide, and graphite. J King Saud Univ Eng Sci. 2017;29(2):172–177.
   Google Scholar
• Jena PC, Parhi DR, Pohit G, et al. Crack assessment by FEM of AMMC beam produced by modified stir casting method. Mater Today Proc. 2015;2(4–5):2267–2276. DOI:10.1016/j.matpr.2015.07.263
   Google Scholar
• Narasaraju G, Raju DL. Characterization of hybrid rice husk and fly ash-reinforced aluminum alloy (AlSi10mg) composites. Mater Today Proc. 2015;2(4–5):3056–3064.
   Google Scholar
• Ashok KB, Murugan N. Metallurgical and mechanical characterization of stir cast AA6061-T6–AlNp composite. Mater Des. 2012;40:52–58.
   Web of Science ®Google Scholar
• Suresh S, Moorthi NSV, Vettivel SC, et al. Mechanical behavior and wear prediction of stir cast Al–TiB2 composites using response surface methodology. Mater Des. 2014;59:383–396.
   Web of Science ®Google Scholar
• Sekar K, Allesu K, Joseph MA. Effect of T6 heat treatment in the microstructure and mechanical properties of A356 reinforced with Nano Al2O3 particles by combination effect of stir and squeeze casting. Procedia Mater Sci. 2014;5:444–453.
   Google Scholar
• Rana RS, Purohit R, Soni VK, et al. Characterization of mechanical properties and microstructure of aluminium alloy-SiC composites. Mater Today Proc. 2015;2(4–5):1149–1156. DOI:10.1016/j.matpr.2015.07.026
   Google Scholar
• Kumar TS, Shalini S, Ramu M, et al. Characterization of ZrC reinforced AA6061 alloy composites produced using stir casting process. J Mech Sci Technol. 2020;34(1):143–147. DOI:10.1007/s12206-019-1214-0
   Web of Science ®Google Scholar
• Kumar GB, Pramod R. Influence of WC particulate reinforcement on the mechanical properties and sliding wear of Al6061 alloy. Appl Mech Mater. 2015;813-814:67–73.
   Google Scholar
• Sam M, Radhika N, Ramu M, et al. Optimizing reciprocal wear responses of centrifugally cast A333 hybrid functionally graded composite using Taguchi and response surface methodology. Int J Interact Des Manuf. 2022;1:1–6.
   Google Scholar
• Kök M. Abrasive wear of Al2O3 particle reinforced 2024 aluminium alloy composites fabricated by vortex method. Compos Part A: Appl Sci. 2006;37(3):457–464.
   Web of Science ®Google Scholar
• Saravanan S, Balan AV, Dinesh S, et al. Electrochemical machining behaviour of AA6063-TiC composites by using response surface methodology. Mater Today Proc. 2020;21:592–594.
   Google Scholar
• Rajan HBM, Ramabalan S, Dinaharan I, et al. Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites. Mater Des. 2013;44:438–445.
   Web of Science ®Google Scholar
• Bharath V, Nagaral M, Auradi V, et al. Preparation of 6061Al-Al2O3 MMC’s by stir casting and evaluation of mechanical and wear properties. Procedia Mater Sci. 2014;6:1658–1667.
   Google Scholar
• Kumar SN, Keshavamurthy R, Haseebuddin MR, et al. Mechanical properties of aluminium-graphene composite synthesized by powder metallurgy and hot extrusion. Trans Indian Inst Met. 2017;70(3):605–613. DOI:10.1007/s12666-017-1070-5
   Web of Science ®Google Scholar
• Balasubramanian I, Maheswaran R. Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites. Mater Des. 2015;65:511–520.
   Web of Science ®Google Scholar
• Gnjidić Z, Bozić D, Mitkov M. The influence of SiC particles on the compressive properties of metal matrix composites. Mater Character. 2001;47(2):129–138.
   Web of Science ®Google Scholar
• Muraliraja R, Arunachalam R, Al-Fori I, et al. Development of alumina reinforced aluminum metal matrix composite with enhanced compressive strength through squeeze casting process. P I Mech Eng. 2018;233:307–314.
   Google Scholar
• Saravanan SD, Kumar MS. Effect of mechanical properties on rice husk ash reinforced aluminum alloy (AlSi10mg) matrix composites. Procedia Eng. 2013;64:1505–1513.
   Google Scholar
• Rajesh R, Rana RS, Verma CS. Fabrication of Al-SiCp composites through powder metallurgy process and testing of properties. Int J Eng Res Appl. 2012;2:420–437.
   Google Scholar
• Manoj S, Dwivedi DD, Singh L, et al. Development of aluminium based silicon carbide particulate metal matrix composite. J Miner Mater Charact Eng. 2009;8(06):455–467. DOI:10.4236/jmmce.2009.86040
   Google Scholar
• Poria S, Sahoo P, Sutradhar G. Tribological characterization of stir-cast Aluminium-TiB2 metal matrix composites. Silicon. 2016;8(4):591–599.
   Web of Science ®Google Scholar
• Singh R, Shadab M, Dash A, et al. Characterization of dry sliding wear mechanisms of AA5083/B4C metal matrix composite. J Brazilian Soc Mech Sci Eng. 2019;41(2):98. DOI:10.1007/s40430-019-1593-2
   Web of Science ®Google Scholar
• Jojith R, Radhika N. Mechanical and tribological properties of LM13/TiO2/MoS2 hybrid metal matrix composite synthesized by stir casting. Part Sci Technol. 2019;37(5):570–582.
   Web of Science ®Google Scholar
• Radhika N, Rajpurohit P, Diwakar A. Synthesis of Al LM25/TiB2 in-situ composites and investigation of its adhesive wear behavior. Part Sci Technol. 2019;38(2):184–192.
   Web of Science ®Google Scholar
• Hosking FM, Portillo FF, Wunderlin R, et al. Composites of aluminium alloys: fabrication and wear behaviour. J Mater Sci. 1982;17(2):477–498. DOI:10.1007/BF00591483
   Web of Science ®Google Scholar
• Chung S, Hwang BH. A microstructural study of the wear behaviour of SiCp/Al composites. Tribol Int. 1994;27(5):307–314.
   Web of Science ®Google Scholar
• Dasgupta R. Aluminium alloy-based metal matrix composites: a potential material for wear resistant applications. Int Sch Res Notices. 2012;2012:594573.
   Google Scholar
• Bhansali KJ, Mehrabian R. Abrasive wear of aluminum-matrix composites. JOM. 1982;34(9):30–34.
   Web of Science ®Google Scholar
• Das S, Das S, Das K. RETRACTED: abrasive wear of zircon sand and alumina reinforced Al–4.5 wt%Cu alloy matrix composites – a comparative study. Compos Sci Technol. 2007;67(3–4):746–751.
   Web of Science ®Google Scholar
• Şahin Y. Abrasive wear behaviour of SiC/2014 aluminium composite. Tribol Int. 2010;43(5–6):939–943.
   Web of Science ®Google Scholar
• Kumar S, Balasubramanian V. Effect of reinforcement size and volume fraction on the abrasive wear behaviour of AA7075 Al/SiCp P/M composites—A statistical analysis. Tribol Int. 2010;43(1–2):414–422.
   Web of Science ®Google Scholar
• Rajeev VR, Dwivedi DK, Jain SC. Dry reciprocating wear of Al–Si–SiCp composites: a statistical analysis. Tribol Int. 2010;43(8):1532–1541.
   Web of Science ®Google Scholar
• Toptan F, Kerti I, Rocha LA. Reciprocal dry sliding wear behaviour of B4Cp reinforced aluminium alloy matrix composites. Wear. 2012;290:74–85.
   Web of Science ®Google Scholar
• Darmiani E, Danaee I, Golozar MA, et al. Reciprocating wear resistance of Al–SiC nano-composite fabricated by accumulative roll bonding process. Mater Des. 2013;50:497–502.
   Web of Science ®Google Scholar
• Lakshmipathy J, Kulendran B. Reciprocating Wear behaviour of 7075Al/SiC and 6061Al/Al2O3 composites: a study of effect of reinforcement, stroke and load. Tribol Ind. 2014;36:117–126.
   Google Scholar
• Costa HL, Junior MO, De Mello JD. Effect of debris size on the reciprocating sliding wear of aluminium. Wear. 2017;376:1399–1410.
   Web of Science ®Google Scholar
• Turnbull A. Review of corrosion studies on aluminium metal matrix composites. Br Corros J. 1992;27(1):27–35.
   Google Scholar
• Shimizu Y, Nishimura T, Matsushima L. Corrosion resistance of Al-based metal matrix composites. Mater Sci Eng A. 1995;198(1–2):113–118.
   Web of Science ®Google Scholar
• Feng Z, Lin C, LIN J. Pitting behavior of SiCp/2024 Al metal matrix composites. J Mater Sci. 1998;33(23):5637–5642.
   Web of Science ®Google Scholar
• Escalera-Lozano R, Gutiérrez CA, Pech-Canul MA, et al. Corrosion characteristics of hybrid Al/SiCp/MgAl2O4 composites fabricated with fly ash and recycled aluminum. Mater Charact. 2007;58(10):953–960.
   Web of Science ®Google Scholar
• Kandpal BC, Kumar J, Singh H. Manufacturing and technological challenges in Stir casting of metal matrix composites– a Review. Mater Today Proc. 2018;5(1):5–10.
   Google Scholar
• David RSJ, Robinson SDS, Dinaharan I. Synthesis and characterization of Al6061-Fly Ashp-SiCp composites by stir casting and compo-casting methods. Energy Procedia. 2013;34:637–646.
   Google Scholar
• Bholi NK, Singh H, Pratap S. Developments in the aluminum metal matrix composites reinforced by micro/nano particles–a review. J Compos Mater. 2020;54(6):813–833.
   Web of Science ®Google Scholar
• Iijima S. Helical microtubules of graphitic carbon. Nature. 1991;354(6348):56–58.
   Web of Science ®Google Scholar
• Isaza Merino CA, Ledezma Sillas JE, Meza JM, et al. Metal matrix composites reinforced with carbon nanotubes by an alternative technique. J Alloys Compd. 2017;707:257–263.
   Web of Science ®Google Scholar
• Liu Q, Ke L, Liu F, et al. Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing. Mater Des. 2013;45:343–348.
   Web of Science ®Google Scholar
• Kumar TS, Shalini S, Priyadharshini GS. Effect of T6 treatment on wear behavior of Al-7Si/ZrSiO4 composites. Silicon. 2021;13(4):1051–1058.
   Web of Science ®Google Scholar