References
- American Society of Mechanical Engineers (ASME). 1989. ASME MFC 3M-1989, Measurements of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi. New York, NY: American Society of Mechanical Engineers.
- ANSI/Air Movement and Control Association (AMCA). 1985. ANSI/AMCA Standard 210-1985, Laboratory Methods of Testing Fans for Rating. Washington, DC: Air Movement and Control Association, Inc.
- ANSI/ASHRAE. 1987. ANSI/ASHRAE Standard 41.2-1987 (RA 92), Standard Methods for Laboratory Airflow Measurement. Atlanta: ASHRAE.
- ANSI/ASHRAE. 1999. ANSI/ASHRAE Standard 120-1999, Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings. Atlanta: ASHRAE.
- ASHRAE. 1988. ASHRAE Standard 111-1988, Practices for Measurement, Testing, Adjusting, and Balancing of Building Heating, Ventilation, Air-Conditioning, and Refrigeration Systems. Atlanta: ASHRAE.
- ASHRAE. 2009. 2009 ASHRAE Handbook—Fundamentals, Chapter 36. Atlanta: ASHRAE.
- ASHRAE. 2013. 2013 ASHRAE Handbook—Fundamentals. Chapter 36, pp. 36.17–36.20. Atlanta: ASHRAE.
- Associated Air Balance Council (AABC). 2002. Associated Air Balance Council (AABC) National Standard for Total System Balance 2002, Washington, DC.
- Bardot, D. 2000. Determining the influence of turbulence intensity on the performance of rotating vane anemometers. Thesis, Kansas State University, Manhattan, KS.
- Beck, B., M. Hosni, and D. Morris. 2000. Determining influence of turbulence intensity on the performance of rotating vane anemometers. Final Report, ASHRAE Research Project 986-RP, Atlanta.
- Beck, B.T., D.M. Bardo, and M.H. Hosni. 2002. Uncertainty analysis of the experimental results investigating the effects of turbulence intensity on the performance of rotating vane anemometers (RP -986). Proceedings of the 2002 ASHRAE Annual Meeting, Honolulu, HI, June 22–26.
- Beck, B.T., G. Payne, and T. Heitman. 2010. The aerodynamics of the pitot-static tube and its current role in non-ideal engineering applications. Proceedings of the ASEE 2010 Annual Conference & Exposition, Louisville, KY, June 20–23, Paper Number AC 2010-1803.
- Heber, A.J., S.E. Cole, and J.P. Murphy. 1991. Facility for testing exhaust ventilation fans. Applied Engineering in Agriculture 7(5):599–605.
- Hickman, C. 2010. Determining the effects of duct fittings on volumetric air flow measurements. M.S. Thesis, Kansas State University, Manhattan, KS.
- Hickman, C., B.T. Beck, and B. Babin. 2012. Determining the effects of duct fittings on volumetric air- flow measurements. Final Report ASHRAE Research Project 1245-RP, Atlanta, GA.
- Hickman, C., B.T. Beck, and B. Babin. 2015. Effect of fittings on volumetric air flow measurements (RP-1245): Single-path duct disturbances. Science and Technology for the Built Environment 21(2):190–206.
- International Organization of Standardization (ISO). 1977. ISO 3966-1977, Measurement of Fluid Flow in Closed Conduits—Velocity Area Method Using Pitot Static Tubes. Geneva, Switzerland: International Organization of Standardization.
- International Organization of Standardization (ISO). 1978. ISO 5168-1978, Measurement of Fluid Flow: Estimation of Uncertainty of a Flow-Rate Measurement. Geneva, Switzerland: International Organization of Standardization.
- MacFerren, E. 1999. Equal area vs. log-Tchebycheff. HPAC Engineering 71(12):26–31.
- Morris, D., B. Beck, and M. Hosni. 2001. Influence of turbulence intensity on the performance of rotating vane anemometers. ASHRAE Transactions 107(1):215–223.
- Richardson, G. 2001. Traversing for flow correction factors. TAB Journal 16–8.
- Sheet Metal and Air Conditioning Contractors National Association (SMACNA). 1995. HVAC Duct Construction Standards, 2nd Ed. Sections 1.1–1.17. Chantilly, VA.