212
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Impact of two-phase distribution systems on the performance of a microchannel evaporator

, , &
Pages 1047-1058 | Received 30 Nov 2014, Accepted 10 Apr 2015, Published online: 22 Aug 2015

References

  • Ahmad, M., G. Berthoud, and P. Mercier. 2009. General characteristics of two-phase flow distribution in a compact heat exchanger. International Journal of Heat and Mass Transfer 52:442–50.
  • Baroczy, C.J. 1963. Correlation of liquid fraction in two-phase flow with application to liquid metals. Report NAA SR-8171, Atomics International. Division of North American Aviation, Inc., Canoga Park, CA.
  • Bell, K.J. 1963. Final report of the cooperative research program on shell-and-tube heat exchangers. University of Delaware Engineering Experiment Station Bulletin, 5, Newark, DE.
  • Blasius, H. 1911. Das Ahnlichkeitsgesetz bei reibungsvorgangen. Physikalische Zeitschrift XII:1175–7.
  • Brix, W., M.R. Kærn, and B. Elmegaard. 2009. Modelling refrigerant distribution in microchannel evaporators. International Journal of Refrigeration 32:1736–43.
  • Cavallini, A., E. Da Riva, and D. Del Col. 2010. Performance of a large capacity propane heat pump with low charge heat exchangers. International Journal of Refrigeration 33:242–50.
  • Cavallini, A., D. Del Col, M. Matkovic, and L. Rossetto, 2009. Frictional pressure drop during vapour–liquid flow in minichannels: Modelling and experimental evaluation. International Journal of Heat and Fluid Flow 30:131–9.
  • Del Col, D., M. Bortolato, and S. Bortolin. 2014. Comprehensive experimental investigation of two-phase heat transfer and pressure drop with propane in a minichannel. International Journal of Refrigeration 47:66–84.
  • Del Col, D., and S. Bortolin. 2012. Investigation of dryout during flow boiling in a single microchannel under non-uniform axial heat flux. International Journal of Thermal Sciences 57:25–36.
  • Del Col, D., A. Cavallini, E. Da Riva, S. Mancin, and G. Censi. 2010. Shell-and-tube minichannel condenser for low refrigerant charge. Heat Transfer Engineering 31(6):509–17.
  • Del Col, D., F. Fantini, and L. Rossetto. 2007. Dryout quality in minichannel flow boiling. XXV UIT National Heat Transfer Conference, Trieste, Italy, June 18–20.
  • Fernando, P., B. Palm, P. Lundqvist, and E. Granryd. 2004. Propane heat pump with low refrigerant charge: Design and laboratory tests. International Journal of Refrigeration 27(7):761–73.
  • Friedel, L. 1979. Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow. Proceedings of the European Two-Phase Flow Group Meeting, Ispra, Italy, June 5–8, Paper E2.
  • Friedel, L. 1980. Pressure drop during gas/vapor-liquid flow in pipes. International Chemical Engineering 20:352–67.
  • Harms, T.M., E.A. Groll, and J.E. Braun. 2003. Accurate charge inventory modeling for unitary air conditioners. Science and Technology for the Built Environment 9(1):55–78.
  • Hrnjak, P. 2004. Developing adiabatic two-phase flow in headers—distribution issue in parallel flow microchannel heat exchangers. Heat Transfer Engineering 25(3):61–8.
  • Hrnjak, P.S., and M.R. Hoehne. 2004. Charge minimization in systems and components using hydrocarbons as a refrigerant. ACRC TR-224, University of Illinois at Urbana-Champaign, IL.
  • Kew, P.A., and K. Cornwell. 1997. Correlations for the prediction of boiling heat transfer in small diameter channels. Applied Thermal Engineering 17:705–15.
  • Kim, N., D. Kim, and H. Byun. 2011. Effect of inlet configuration on the refrigerant distributiuon in a parallel flow minichannel heat exchanger. International Journal of Refrigeration 34:1209–21.
  • Liu, Z., and R.H.S. Winterton. 1991. A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation. International Journal of Heat and Mass Transfer 34(11):2759–66.
  • Lockhart, R.W., and R.C. Martinelli. 1949. Proposed correlation of data for isothermal two-phase, two-component flow in pipes. Chemical Engineering Progress 45:39–48.
  • Marchitto, A., F. Devia, M. Fossa, G. Guglielmini, and C. Schenone. 2008. Experiments on two-flow distribution inside parallel channels of compact heat exchangers. International Journal of Multiphase Flow 34:128–44.
  • McAdams, W.H. 1954. Heat Transmission, 3rd Ed., p. 219. New York: McGraw-Hill.
  • Mueller, A.C., and J.P. Chiou. 1988. Review of various types of flow maldistribution in heat exchangers. Heat Transfer Engineering 9(2):36–50.
  • Niño, V.G., P.S. Hrnjak, and T.A. Newell. 2002. Characteristics of two-phase flow in microchannels. Ph.D. Thesis ACRC TR-202, University of Illinois at Urbana-Champaign, IL.
  • NIST. 2007. Refprop 8.0. NIST, Boulder CO.
  • Ong, C.L., and J.R. Thome. 2011. Macro-to-microchannel transition in two-phase flow: Part 1 – two-phase flow patters and film thickness measurements. Experimental Thermal and Fluid Science 35:37–47.
  • Pacio, J.C., and C.A. Dorao. 2010. A study of the effect of flow maldistribution on heat transfer performance in evaporators. Nuclear Engineering and Design 240:3868–77.
  • Paliwoda, A. 1992. Generalized method of pressure drop calculation across pipe components containing two-phase flow of refrigerants. International Journal of Refrigeration 15(2):119–25.
  • Palm, B. 2007. Refrigeration systems with minimum charge of refrigerant. Applied Thermal Engineering 27(10):1693–701.
  • Premoli, A., D. Francesco, and A. Prina. 1970. An empirical correlation for evaluating two phase mixture density under adiabatic conditions. European Two-Phase Flow Group Meeting, Milan, Italy, June 8–10.
  • Regulation (EU) No 517/2014 of the European Parliament and of the Council of 16 April 2014 on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006. Official Journal of the European Union.
  • Rouhani, S.Z. 1969. Subcooled void fraction. Internal Report AE-RTV841, AB Atomenergi Sweden, Sweden.
  • Sun, L., and K. Mishima. 2009. An evaluation of prediction methods for saturated flow 1180 boiling heat transfer in mini-channels. International Journal of Heat and Mass Transfer 52:5323–9.
  • Ullmann, A., and N. Brauner. 2007. The prediction of flow pattern maps in minichannels. Multiphase Science and Technology 19(1):49–73.
  • Taborek, J. 1983. Heat Exchanger Design Handbook. Washington: Hemisphere P. Corporation.
  • Zhang, H.Y., J.M. Li, N. Liu, and B.X. Wang. 2012. Experimental investigation of condensation heat transfer and pressure drop of R22, R410A and R407C in mini-tubes. International Journal of Heat and Mass Transfer 55:3522–32.
  • Zivi, S.M. 1963. Estimation of steady-state steam void-fraction by means of the principal of minimum entropy production. AIChE-ASME 6th Nat. Heat Transfer Conf., Boston, MA, August, ASME reprint 63-HT-16.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.