Influence of pore structure on humidity control performance of diatomite

References

• Akhtar, F., R. Yaster, and B. Lennart. 2010. A study of the sintering of diatomaceous earth to produce porous ceramic monoliths with bimodal porosity and high strength. Powder Technology 201(3):253–7.
   Web of Science ®Google Scholar
• Arundel, A.V., E.M. Sterling, J.H. Biggin, and T.D. Sterling. 1986. Indirect health effects of relative humidity in indoor environments. Environmental Health Perspectives 65:351–61.
   PubMed Web of Science ®Google Scholar
• Caturla, F., M. Molina-Sabio, and F. Rodriguez-Reinoso. 1999. Adsorption–desorption of water vapor by natural and heat-treated sepiolite in ambient air. Applied Clay Science 15(3–4):367–80.
   Web of Science ®Google Scholar
• Connolly, E.J., G.M. O'Halloran, H.T.M. Pham, P.M. Sarro, and P.J. French. 2002. Comparison of porous silicon, porous polysilicon and porous silicon carbide as materials for humidity sensing applications. Sensors and Actuators A: Physical 99(1–2):25–30.
   Web of Science ®Google Scholar
• Hadjar, H., B. Hamdi, and C.O. Ania. 2011. Adsorption of p-cresol on novel diatomite/carbon composites. Journal of Hazardous Materials 188(1–3):304–10.
   PubMed Web of Science ®Google Scholar
• Ho, Y.S., and G. McKay. 1998. A comparison of chemisorption kinetic models applied to pollutant removal on various sorbents. Process Safety and Environmental Protection 76(4):332–40.
   Web of Science ®Google Scholar
• International Standards Organization. 2000. Hygrothermal performance of building materials and products—determination of hygroscopic sorption properties. ISO 12571-2000.
   Google Scholar
• Korunic, Z. 1998. Review diatomaceous earths, a group of natural insecticides. Journal of Stored Products Research 34(2–3):87–97.
   Web of Science ®Google Scholar
• Maddison, M., T. Mauring, K. Kirsimäe, and Ü. Mander. 2009. The humidity buffer capacity of clay–sand plaster filled with phytomass from treatment wetlands. Building and Environment 44(9):1864–8.
   Web of Science ®Google Scholar
• Maeda, M., M. Suzuki, F. Ohashi, K. Inukai, S. Tomura, Y. Shibasaki, K. Aikawa, and K. Okada. 2002. Water vapor adsorption of porous materials of AlOOH-Al2O3. Journal of the Ceramic Society of Japan 110(2):118–20.
   Web of Science ®Google Scholar
• Nakabayashi, S., K. Nagano, M. Nakamura, J. Togawa, and A. Kurokawa. 2011. Improvement of water vapor adsorption ability of natural mesoporous material by impregnating with chloride salts for development of a new desiccant filter. Adsorption-Journal of the International Adsorption Society 17(4):675–86.
   Web of Science ®Google Scholar
• Nikolaidis, Y., P. Petros, and C. Alexandros. 2009. Economic evaluation of energy saving measures in a common type of Greek building. Applied Energy 86(12):2550–9.
   Web of Science ®Google Scholar
• Ohashi, F., M. Maeda, K. Inukai, M. Suzuki, and S. Tomura. 1999. Study on intelligent humidity control materials: Water vapor adsorption properties of mesostructured silica derived from amorphous fumed silica. Journal of Materials Science 34(6):1341–6.
   Web of Science ®Google Scholar
• Ohgama, T., H. Ishikawa, M. Norimoto, and N. Kamba. 2001. Humidity control effects of woods and artificial woods made of ceramics. Mokuzai Gakkaishi 47(2):97–102.
   Web of Science ®Google Scholar
• Ren, Z.J., H.M. Gao, H.Q. Zhang, and X. Liu. 2014. Effects of fluxes on the structure and filtration properties of diatomite filter aids. International Journal of Mineral Processing 130:28–33.
   Web of Science ®Google Scholar
• Shawabkeh, R.A., and M.F. Tutunji. 2003. Experimental study and modeling of basic dye sorption by diatomaceous clay. Applied Clay Science 24(1–2):111–20.
   Web of Science ®Google Scholar
• Sheng, G.D., S.W. Wang, J. Hu, Y. Lu, J.X. Li, Y.H. Dong, and X.K. Wang. 2009. Adsorption of Pb(II) on diatomite as affected via aqueous solution chemistry and temperature. Colloid and Surface A: Physicochemical and Engineering Aspects 339(1–3):159–66.
   Web of Science ®Google Scholar
• Sing, K. 2001. The use of nitrogen adsorption for the characterisation of porous materials. Colloid and Surface A: Physicochemical and Engineering Aspects 187:3–9.
   Web of Science ®Google Scholar
• Sun, Z.M, C.H. Bai, S.L. Zheng, X.P. Yang, and R.L. Frost. 2013a. A comparative study of different porous amorphous silica minerals supported TiO2 catalysts. Applied Catalysis A: General 458:103–10.
   Web of Science ®Google Scholar
• Sun, Z.M., X.P. Yang, G.X. Zhang, S.L, Zheng, and R.L. Frost. 2013b. A novel method for purification of low grade diatomite powders in centrifugal fields. International Journal of Mineral Processing 125:18–26.
   Web of Science ®Google Scholar
• Sun, Z.M., Z.B. Hu, Y. Yan, and S.L. Zheng. 2014. Effect of preparation conditions on the characteristics and photocatalytic activity of TiO2/purified diatomite composite photocatalysts. Applied Surface Science 314:251–9.
   Web of Science ®Google Scholar
• Sun, Z.M., Y. Yan, G. Zhang, Z. Wu, and S. Zheng. 2015. The influence of carriers on the structure and photocatalytic activity of TiO2/diatomite composite photocatalysts. Advanced Powder Technology 26(2):595–601.
   Web of Science ®Google Scholar
• Tomita, Y., R. Takahashi, S. Sato, T. Sodesawa, and M. Otsuda. 2004. Humidity control ability of silica with bimodal pore structures prepared from water glass. Journal of Ceramic Society of Japan 112(1209):491–5.
   Web of Science ®Google Scholar
• Vu, D.H., K.S. Wang, B.H. Bac, and B.X. Nam. 2013. Humidity control materials prepared from diatomite and volcanic ash. Construction and Building Materials 38:1066–72.
   Web of Science ®Google Scholar
• Watanabe, O., E.H. Ishida, and H. Maeda. 2008. Development of an autonomous humidity controlling building material by using mesopores. Transactions of the Materials Research Society of Japan 33(2):489–92.
   Google Scholar
• Xia, Y., F.F. Li, Y. Jiang, M.S. Xia, B. Xue, and Y.J. Li. 2014. Interface actions between TiO2 and porous diatomite on the structure and photocatalytic activity of TiO2-diatomite. Applied Surface Science 303(1):290–6.
   Web of Science ®Google Scholar
• Yang, H.L., Z.Q. Peng, Y. Zhou, F. Zhao, J. Zhang, X.Y. Cao, and Z.W. Hu. 2011. Preparation and performances of a novel intelligent humidity control composite material. Energy and Buildings 43(2–3):386–92.
   Web of Science ®Google Scholar
• Yu, H.W., and B. Fugetsu. 2010. A novel adsorbent obtained by inserting carbon nanotubes into cavities of diatomite and applications for organic dye elimination from contaminated water. Journal of Hazardous Materials 177(1–3):138–45.
   PubMed Web of Science ®Google Scholar
• Zhang, H.B., and H. Yoshino. 2010. Analysis of indoor humidity environment in Chinese residential buildings. Building and Environment 45(10):2132–40.
   Web of Science ®Google Scholar
• Zhang, J.L., Y.M. Wu, M.Y. Xing, S.A.K. Leghari, and S. Sajjad. 2010. Development of modified N doped TiO2 photocatalyst with metals, nonmetals and metal oxides. Energy Environmental Science 3:715–26.
   Web of Science ®Google Scholar
• Zhao, K., X.H. Liu, T. Zhang, and Y. Jiang. 2011. Performance of temperature and humidity independent control air-conditioning system in an office building. Energy and Buildings 43(8):1895–903.
   Web of Science ®Google Scholar