Enhancement of R1234ze(Z) pool boiling heat transfer on horizontal titanium tubes for high-temperature heat pumps

References

• ASHRAE. 2015. SSPC-34: Designation and Safety Classification of Refrigerants. ANSI/ASHRAE Standard 34–2013 Addenda 2015. Atlanta: ASHRAE.
   Google Scholar
• Akasaka, R., Y. Higashi, A. Miyara, and S. Koyama. 2014. A fundamental equation of state for cis-1,3,3,3-tetrafluoropropene (R-1234ze(Z)). International Journal of Refrigeration 44:168–76. DOI: 10.1016/j.ijrefrig.2013.12.018
   Web of Science ®Google Scholar
• Brown, J.S., C. Zilio, and A. Cavallini. 2009. The fluorinated olefin R-1234ze(Z) as a high-temperature heat pumping refrigerant. International Journal of Refrigeration 32:1412–22. DOI: 10.1016/j.ijrefrig.2009.03.002
   Web of Science ®Google Scholar
• Cavallini, A., C. Zilio, and J.S. Brown. 2014. Sustainability with prospective refrigerants. Journal of Energy Research 38:285–98. DOI: 10.1002/er.3035
   Web of Science ®Google Scholar
• Chien, L.H., and R.L. Webb. 1998a. Visualization of pool boiling on enhanced surface. Experimental Thermal and Fluid Science 16:332–41. DOI: 10.1016/S0894-1777(97)10032-2
   Web of Science ®Google Scholar
• Chien, L.H., and R.L. Webb. 1998b. A parametric study of nucleate boiling on structured surfaces, Prat1: Effect of tunnel dimensions. ASME Journal of Heat Transfer 120:1042–8. DOI: 10.1115/1.2825888
   Web of Science ®Google Scholar
• Chien, L.H., and R.L. Webb. 1998c. A parametric study of nucleate boiling on structured surfaces, Prat2: Effect of pore diameter and pore pitch. ASME Journal of Heat Transfer 120:1049–54. DOI: 10.1115/1.2825889
   Web of Science ®Google Scholar
• Fukuda, S., C. Kondou, N. Takata, and S. Koyama. 2014. Low GWP refrigerants R1234ze(E) and R1234ze(Z) for high temperature heat pumps. International Journal of Refrigeration 40:161–73. DOI: 10.1016/j.ijrefrig.2013.10.014
   Web of Science ®Google Scholar
• Gorenflo, D., E. Baumhögger, T. Windmann, and G. Herres. 2010. Nucleate pool boiling, film boiling and single-phase free convection at pressures up to the critical state. Part I: Integral heat transfer for horizontal copper cylinders. International Journal of Refrigeration 33:1229–50. DOI: 10.1016/j.ijrefrig.2010.07.015
   Web of Science ®Google Scholar
• Higashi, Y., S. Hayasaka, C. Shirai, and R. Akasaka. 2015. Measurements of PρT properties, vapor pressures, saturated densities, and critical parameters for R 1234ze(Z) and R 245fa. International Journal of Refrigeration 52:100–8. DOI: 10.1016/j.ijrefrig.2014.12.007
   Web of Science ®Google Scholar
• Hodnebrog, Ø., M. Etminan, J.S. Fuglestvedt, G. Marston, G. Myhre, C.J. Nielsen, K.P. Shine, and T.J. Wallington. 2013. Global warming potentials and radiative efficiencies of halocarbons and related compounds: A comprehensive review. Reviews of Geophysics 51:300–78. DOI: 10.1002/rog.20013
   Web of Science ®Google Scholar
• Jung, D., Y. Kim, Y. Ko, and K. Song. 2003. Nucleate boiling heat transfer coefficients of pure halogenated refrigerants. International Journal of Refrigeration 26:240–8.
   Web of Science ®Google Scholar
• Kondou, C., and S. Koyama. 2015. Thermodynamic assessment of high-temperature heat pumps using low-GWP HFO refrigerants for heat recovery. International Journal of Refrigeration 53:126–41. DOI: 10.1016/j.ijrefrig.2014.09.018
   Web of Science ®Google Scholar
• Kondou, C., R. Nagata, N. Nii, S. Koyama, and Y. Higashi. 2015. Surface tension of low GWP refrigerants R1243zf, R1234ze(Z), and R1233zd(E). International Journal of Refrigeration 53:80–9. DOI: 10.1016/j.ijrefrig.2015.01.005
   Web of Science ®Google Scholar
• Koyama, S., T. Higashi, A. Miyara, and R. Akasaka. 2013. Research and development of low-GWP refrigerants suitable for heat pump systems. JSRAE Risk Assessment of Mildly Flammable Refrigerants—2012 Progress Report, pp. 29–34. http://www.jsrae.or.jp/info/2012progress_report_e.pdf
   Google Scholar
• Lemmon, E.W., M.L. Huber, and M.O. McLinden. 2013. Reference Fluid Thermodynamic and Transport Properties—REFPROP Ver. 9.1. Boulder, CO: National Institute of Standards and Technology.
   Google Scholar
• Longo, G.A., C. Zilio, G. Righetti, and J.S. Brown. 2014. Experimental assessment of the low GWP refrigerant HFO-1234ze(Z) for high temperature heat pumps. Experimental Thermal and Fluid Science 57:293–300.
   Web of Science ®Google Scholar
• McLinden, M.O., A.F. Kazakov, S.J. Brown, and P.A. Domanski. 2014. A thermodynamic analysis of refrigerants: Possibilities and tradeoffs for Low-GWP refrigerants. International Journal of Refrigeration 38:80–92. DOI:10.1016/j.ijrefrig.2013.09.032
   Web of Science ®Google Scholar
• Myhre, G., D. Shindell, F.-M. Bréon, W. Collins, J. Fuglestvedt, J. Huang, D. Koch, J.-F. Lamarque, D. Lee, B. Mendoza, T. Nakajima, A. Robock, G. Stephens, T. Takemura, and H. Zhan. 2013. 2013: Anthropogenic and Natural Radiative Forcing. In: Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. DOI: 10.1017/CBO9781107415324.018
   Google Scholar
• Nakayama, W., T. Daikoku, H. Kuwahara, and T. Nakajima. 1980a. Dynamic model of enhanced boiling heat transfer on porous surfaces. Part 1: Experimental investigation. ASME Journal of Heat Transfer 102:445–50. DOI: 10.1115/1.3244320.
   Web of Science ®Google Scholar
• Nakayama, W., T. Daikoku, H. Kuwahara, and T. Nakajima. 1980b. Dynamic model of enhanced boiling heat transfer on porous surfaces. Part 2: Analytical modeling. ASME Journal of Heat Transfer 102:451–6. DOI: 10.1115/1.3244321.
   Web of Science ®Google Scholar
• Pate, M.B., Z.H. Ayub, and J. Kohleer. 1990. Heat Exchangers in the Air Condition and Refrigeration Industry. Compact heat exchangers. R.K. Shah, A.D. Kraus, D.E. Metzger, eds. New York NY: Hemisphere; pp. 567–90.
   Google Scholar
• Phan, H.T., N. Caney, P. Marty, S. Colasson, and J. Gavillet. 2009. Surface wettability control by nanocoating: The effects on pool boiling heat transfer and nucleation mechanism. International Journal of Heat Mass Transfer 52:5459–71.
   Web of Science ®Google Scholar
• Rainey, K.N., and S.M. You. 2000. Pool boiling heat transfer from plain and microporous, square pin-finned surfaces in saturated FC-72. International Journal of Heat Transfer 122:509–16.
   Web of Science ®Google Scholar
• Ribatski, G., and J.M.S. Jabardo. 2003. Experimental study of nucleate boiling of halocarbon refrigerants on cylindrical surfaces. International Journal of Heat Mass Transfer 46:4439–51.
   Web of Science ®Google Scholar
• Stephan, K., and M. Abdelsalam. 1980. Heat-transfer correlations for natural convection boiling. International Journal of Heat Mass Transfer 23:73–87.
   Web of Science ®Google Scholar
• Taylor, J.R. 1997. An Introduction to Error Analysis, 2nd Ed. New York, NY: University Science Book; 73–7.
   Google Scholar
• Thome, J.R. 2006. Engineering Data Book III, Chapter 9, Boiling heat transfer on external surfaces. Decatur, AL: Wolverine Tube, Inc.; pp. 1–38.
   Google Scholar
• Van Rooyen, E., and J.R. Thome. 2013. Pool boiling data and prediction method for enhanced boiling tubes with R-134a, R-236fa and R-1234ze(E). International Journal of Refrigeration 36:447–55. DOI: 10.1016/j.ijrefrig.2012.11.023
   Web of Science ®Google Scholar
• Webb, R.L. 1994. Principles of Enhanced Heat Transfer, Chapter 11. New York, NY: Wiley.
   Google Scholar