Experimental investigations on the working performance of a sliding vane pump in the electronic direct cooling system

References

• Agostini, B., J. R. Thome, M. Fabbri, and B. Michel. 2008. High heat flux two-phase cooling in silicon multi-micro-channels. IEEE Transactions on Components and Packaging Technologies 31 (3):691–701. doi:10.1109/TCAPT.2008.921997
   Google Scholar
• Battarra, M., A. Blum, and E. Mucchi. 2019. Kinematics of a sliding vane pump with circular tip vanes. Mechanism and Machine Theory 137:355–73. doi:10.1016/j.mechmachtheory.2019.03.034
   Web of Science ®Google Scholar
• Bevington, P. R., and D. K. Robinson. 2002. Data reduction and error analysis for the physical sciences. 3rd ed., 6–8. McGraw-Hill.
   Google Scholar
• Cipollone, R., G. Bianchi, D. Di Battista, and F. Fatigati. 2015a. Fuel economy benefits of a new engine cooling pump based on sliding vane technology with variable eccentricity. Energy Procedia 82:265–72. doi:10.1016/j.egypro.2015.12.032
   Google Scholar
• Cipollone, R., and D. Di Battista. 2015. Sliding vane rotary pump in engine cooling system for automotive sector. Applied Thermal Engineering 76:157–66. doi:10.1016/j.applthermaleng.2014.11.001
   Web of Science ®Google Scholar
• Cipollone, R., D. Di Battista, G. Contaldi, S. Murgia, and M. Mauriello. 2015b. Development of a sliding vane rotary pump for engine cooling. Energy Procedia 81:775–83. doi:10.1016/j.egypro.2015.12.083
   Google Scholar
• Daraghmeh, H., M. Sulaiman, K.-S. Yang, and C.-C. Wang. 2018. Investigation of separated two-phase thermosiphon loop for relieving the air-conditioning loading in datacenter. Energies 12 (1):105–23. doi:10.3390/en12010105
   Web of Science ®Google Scholar
• da Silva, L. R., Q. Jesús Moreno, and J. R. Thome. 2009. Flow boiling in horizontal smooth tubes: New heat transfer results for R-134a at three saturation temperatures. Applied Thermal Engineering 29 (7):1289–98. doi:10.1016/j.applthermaleng.2008.06.021
   Web of Science ®Google Scholar
• Hannemann, R., J. Marsala, and M. Pitasi. 2004. Pumped liquid multiphase cooling, International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers 29:469–73.
   Google Scholar
• Howes, J. C., D. B. Levett, S. T. Wilson, J. Marsala, and D. L. Saums. 2008. Cooling of an IGBT drive system with vaporizable dielectric fluid (VDF). Paper presented at the Twenty-fourth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 9–15.
   Google Scholar
• Joshi, S. N., and E. M. Dede. 2017. Two-phase jet impingement cooling for high heat flux wide band-gap devices using multi-scale porous surfaces. Applied Thermal Engineering 110:10–7. doi:10.1016/j.applthermaleng.2016.08.146
   Web of Science ®Google Scholar
• Kuo, S.-C., C.-C. Shih, C.-C. Chang, and S.-L. Chen. 2013. Bubble pump in a closed-loop system for electronic cooling. Applied Thermal Engineering 51 (1-2):425–34. doi:10.1016/j.applthermaleng.2012.06.055
   Web of Science ®Google Scholar
• Liu, J., N.-Q. Pei, K.-H. Guo, Z.-H. He, and T.-X. Li. 2008a. Experimental investigation on a mechanically pumped two-phase cooling loop with dual-evaporator. International Journal of Refrigeration 31 (7):1176–82.
   Web of Science ®Google Scholar
• Liu, J., N.-Q. Pei, K.-H. Guo, Z.-H. He, T.-X. Li, and M. Lv. 2008b. Experimental investigation on mechanical pumped cooling loop for application in future space missions. Energy Conversion and Management 49 (10):2704–10. doi:10.1016/j.enconman.2008.04.003
   Web of Science ®Google Scholar
• Ma, Y., G. Ma, S. Zhang, and F. Zhou. 2016. Cooling performance of a pump-driven two phase cooling system for free cooling in data centers. Applied Thermal Engineering 95:143–9. doi:10.1016/j.applthermaleng.2015.11.002
   Web of Science ®Google Scholar
• Marcinichen, J. B., D. Wu, S. Paredes, J. R. Thome, and B. Michel. 2014. Dynamic flow control and performance comparison of different concepts of two-phase on-chip cooling cycles. Applied Energy 114:179–91. doi:10.1016/j.apenergy.2013.09.018
   Web of Science ®Google Scholar
• Olivier, J. A., J. B. Marcinichen, A. Bruch, and J. Thome. 2011. Green cooling of high performance microprocessors: Parametric study between flow boiling and water cooling. Journal of Thermal Science and Engineering Applications 3 (4):41–3. doi:10.1115/1.4004435
   Google Scholar
• Rundo, M., G. Altare, and P. Casoli. 2019. Simulation of the filling capability in vane pumps. Energies 12 (2):283–300. doi:10.3390/en12020283
   Web of Science ®Google Scholar
• Tanuwijava, A., C. Ho, C.-M. Lai, and C.-Y. Huang. 2013. Numerical investigation of the thermal management performance of MEPCM modules for PV applications. Energies 6 (8):3922–36. doi:10.3390/en6083922
   Web of Science ®Google Scholar
• Tong, Z., T. Ding, Z. Li, and X.-H. Liu. 2015. An experimental investigation of an R744 two-phase thermosyphon loop used to cool a data center. Applied Thermal Engineering 90:362–5. doi:10.1016/j.applthermaleng.2015.07.019
   Web of Science ®Google Scholar
• Verlaat, B. 2007. Controlling a 2-phase CO2 loop using a 2-phase accumulator. Paper presented at the International Conference of Refrigeration, Beijing, ICR07-B2-1565.
   Google Scholar
• Wu, L., Y. Chen, S. Wu, M. Zhang, W. Yang, and F. Tang. 2018. Visualization study of startup modes and operating states of a flat two-phase micro thermosyphon. Energies 11 (9):2291–306. doi:10.3390/en11092291
   Web of Science ®Google Scholar
• Yan, G., Y. Feng, and L. Peng. 2015. Experimental analysis of a novel cooling system driven by liquid refrigerant pump and vapor compressor. International Journal of Refrigeration 49:11–8. doi:10.1016/j.ijrefrig.2014.09.017
   Web of Science ®Google Scholar
• Yin, X., F. Cao, L. Jin, B. Hu, P. Shu, and X. Wang. 2016. Numerical and experimental investigations of electronic evaporative cooling performance with a coiled channel. Applied Thermal Engineering 94:256–65. doi:10.1016/j.applthermaleng.2015.10.127
   Web of Science ®Google Scholar
• Zhang, J., Z. Xu, J. Lin, Z. Lin, J. Wang, and T. Xu. 2018. Thermal characteristics investigation of the internal combustion engine cooling-combustion system using thermal boundary dynamic coupling method and experimental verification. Energies 11 (8):2127–47. doi:10.3390/en11082127
   Web of Science ®Google Scholar
• Zhang, W.-W W.-L. Cheng, S.-D. Shao, L.-J. Jiang, and D.-L. Hong. 2016. Integrated thermal control and system assessment in plug-chip spray cooling enclosure. Applied Thermal Engineering 108:104–14. doi:10.1016/j.applthermaleng.2016.07.097
   Web of Science ®Google Scholar