Cooling load comparison of rooms conditioned with radiant cooling panels and all-air HVAC systems (ASHRAE RP 1729)

References

• Andres-Chicote, M., A. Tejero-Gonzalez, E. Velasco-Gomez, and F. J. Rey-Martinez. 2012. Experimental study on the cooling capacity of a radiant cooled ceiling system. Energy and Buildings 54:207–14.
   Web of Science ®Google Scholar
• ANSI/ASHRAE/ACCA Standard 180. 2018. Standard practice for inspection and maintenance of commercial building HVAC systems. https://www.ashrae.org/File%20Library/Technical%20Resources/Bookstore/previews_2016639_pre.pdf
   Google Scholar
• ASHRAE. 2000. ASHRAE Guideline 2, Engineering Analysis of Experimental Data. Atlanta: American Society of Heating, Refrigerating and Air Conditioning Engineers.
   Google Scholar
• ASHRAE. 2013. Chapter 18: Nonresidential cooling and heating load calculations. ASHRAE Handbook of Fundamentals. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
   Google Scholar
• ASHRAE Standard 62.1. 2016. Ventilation for acceptable indoor air quality. (https://www.ashrae.org/File%20Library/Technical%20Resources/Standards%20and%20Guidelines/Standards%20Addenda/62.1-2016/62_1_2016_s_20190726.pdf)
   Google Scholar
• Boccardo, L. B., O. B. Kazanci, J. Q. Allerhand, and B. W. Olesen. 2019. Economic comparison of TABS, PCM ceiling panels and all-air systems for cooling offices. Energy and Buildings 205:109527.
   Google Scholar
• Bourdakis, E., O. B. Kazanci, and B. W. Olesen. 2015. Load calculations of radiant cooling systems for sizing the plant. 6th International Building Physics Conference (IBPC).
   Google Scholar
• Brunk, M. F. 1993. Cooling ceilings—An opportunity to reduce energy costs by way of radiant cooling. ASHRAE Transaction 99 (2):479–87.
   Google Scholar
• Causone, F., S. P. Corgnati, M. Filippi, and B. W. Olesen. 2009. Experimental evaluation of heat transfer coefficients between radiant ceiling and room. Energy and Buildings 41 (6):622–8. doi:10.1016/j.enbuild.2009.01.004
   Web of Science ®Google Scholar
• Causone, F., S. P. Corgnati, M. Filippi, and B. W. Olesen. 2010. Solar radiation and cooling load calculation for radiant systems: Definition and evaluation of the direct solar load. Energy and Buildings 42 (3):305–14. doi:10.1016/j.enbuild.2009.09.008
   Web of Science ®Google Scholar
• Conroy, C. L., and S. A. Mumma. 2001. Ceiling radiant cooling panels as a viable distributed parallel sensible cooling technology integrated with dedicated outdoor air systems/discussion. ASHRAE Transactions 107:578.
   Google Scholar
• Corgnati, S. P., M. Perino, G. V. Fracastoro, and P. V. Nielsen. 2009. Experimental and numerical analysis of air and radiant cooling systems in offices. Building and Environment 44 (4):801–6. doi:10.1016/j.buildenv.2008.05.022
   Web of Science ®Google Scholar
• De Carli, M., and B. W. Olesen. 2002. Field measurements of operative temperatures in buildings heated or cooled by embedded water-based radiant systems. ASHRAE Transactions 108:714.
   Google Scholar
• Feng, J. D., S. Schiavon, and F. Bauman. 2013. Cooling load differences between radiant and air systems. Energy and Buildings 65:310–21. doi:10.1016/j.enbuild.2013.06.009
   Web of Science ®Google Scholar
• Feng, J. D., F. Bauman, and S. Schiavon. 2014. Experimental comparison of zone cooling load between radiant and air systems. Energy and Buildings 84:152–9. doi:10.1016/j.enbuild.2014.07.080
   Web of Science ®Google Scholar
• Feustel, H. E., and C. Stetiu. 1995. Hydronic radiant cooling—Preliminary assessment. Energy and Buildings 22 (3):193–205. doi:10.1016/0378-7788(95)00922-K
   Web of Science ®Google Scholar
• Givoni, B., M. Gulich, C. Gomez, and A. Gomez. 1996. Radiant cooling by metal roofs in developing countries. Proceedings of the 21st National Passive Solar Conference – Sundancin in the Smokies (Solar 96), 83–7.
   Google Scholar
• Hu, R., G. Liu, and J. Niu. 2020. The impacts of a building’s thermal mass on the cooling load of a radiant system under various typical climates. Energies 13 (6):1356. doi:10.3390/en13061356
   Web of Science ®Google Scholar
• Hu, R., and J. L. Niu. 2012. A review of the application of radiant cooling & heating systems in Mainland China. Energy and Buildings 52:11–9.
   Web of Science ®Google Scholar
• Jeong, J. W., and S. A. Mumma. 2003. Ceiling radiant cooling panel capacity enhanced by mixed convection in mechanically ventilated spaces. Applied Thermal Engineering 23 (18):2293–306. doi:10.1016/S1359-4311(03)00211-4
   Web of Science ®Google Scholar
• Jeong, J. W., and S. A. Mumma. 2007. Practical cooling capacity estimation model for a suspended metal ceiling radiant cooling panel. Building and Environment 42 (9):3176–85. doi:10.1016/j.buildenv.2006.08.006
   Web of Science ®Google Scholar
• Lu, J., J. H. Chen, D. C. Gao, and H. Ding. 2008. Experimental analysis on floor panel cooling systems in residential buildings. HV&AC 37 (12):20–4.
   Google Scholar
• McQuiston, F. C., J. D. Parker, and J. D. Spitler. 2005. Heating, ventilating, and air conditioning analysis and design. 6th Ed. New York: John Wiley and Sons.
   Google Scholar
• McQuiston, F. C, and J. D. Spitler. 1992. Cooling and heating load calculation manual. Atlanta, Georgia: ASHRAE.
   Google Scholar
• Moftakhari, A., and A. Novoselac. 2020. Improvement in the operative temperature measurement of radiant cooling panels. ASHRAE Transactions 126 (2)
   Google Scholar
• Moftakhari, A., and A. Novoselac. 2020, June. Experimental study on cooling loads of radiant and all-air systems (VC-20-C051). In 2020 ASHRAE Virtual Conference. ASHRAE. https://ashraem.confex.com/ashraem/s20/meetingapp.cgi/Paper/27075
   Google Scholar
• Moftakhari, A., F. Torabi, and C. Aghanajafi. 2016. A novel energy simulation approach for thermal design of buildings equipped with radiative panels using inverse methodology. Energy and Buildings 113:169–81. doi:10.1016/j.enbuild.2015.12.007
   Web of Science ®Google Scholar
• Moftakhari, A., C. Aghanajafi, and A. Moftakhari Chaei Ghazvin. 2016. An innovative inverse analysis technique for building cooling design with HVAC systems. Science and Technology for the Built Environment 22 (3):299–316. doi:10.1080/23744731.2016.1132940
   Web of Science ®Google Scholar
• Moftakhari, A., S. Bourne, and A. Novoselac. 2020. Experiment verification of cooling load calculations for spaces with non-uniform temperature radiant surface: ASHRAE 1729-TRP project (No. 1729-TRP). Austin, TX: University of Texas at Austin.
   Google Scholar
• Mumma, S. A. 2001. Ceiling panel cooling systems. ASHRAE Journal 43 (11):28.
   Web of Science ®Google Scholar
• Ning, B., Y. Chen, and H. Jia. 2020. Cooling load dynamics and simplified calculation method for radiant ceiling panel and dedicated outdoor air system. Energy and Buildings 207:109631. doi:10.1016/j.enbuild.2019.109631
   Web of Science ®Google Scholar
• Ning, B., and Y. Chen. 2017. Cooling load calculation for integrated operation of radiant and fresh air systems. Procedia Engineering 205:2987–94. doi:10.1016/j.proeng.2017.10.223
   Google Scholar
• Niu, J. 1994. Modelling of cooled-ceiling air-conditioning systems: Influences on Indoor environment and energy consumption, Doctoral thesis, Delft University of Technology.
   Google Scholar
• Niu, J., J. V. Kooi, and H. V. Ree. 1997. Cooling load dynamics of rooms with cooled ceilings. Building Services Engineering Research and Technology 18 (4):201–7. doi:10.1177/014362449701800404
   Google Scholar
• Novoselac, A., and J. Srebric. 2002. A critical review on the performance and design of combined cooled ceiling and displacement ventilation systems. Energy and Buildings 34 (5):497–509. doi:10.1016/S0378-7788(01)00134-7
   Web of Science ®Google Scholar
• Olesen, B. W. 2002. Radiant floor heating in theory and practice. ASHRAE Journal 44 (7):19–26.
   Web of Science ®Google Scholar
• Olesen, B. W. 1997. Possibilities and limitations of radiant floor cooling. ASHRAE Transactions 103:42–8.
   Google Scholar
• Olesen, B. W., F. Bonnefoi, E. Michel, and M. Carli. 2000. Heat exchange coefficient between floor surface and space by floor cooling – theory or a question of definition. ASHRAE Transactions 106 (1):684–94.
   Google Scholar
• Oxizidis, S., and A. M. Papadopoulos. 2013. Performance of radiant cooling surfaces with respect to energy consumption and thermal comfort. Energy and Buildings 57:199–209. doi:10.1016/j.enbuild.2012.10.047
   Web of Science ®Google Scholar
• Pantelic, J., S. Schiavon, B. Ning, E. Burdakis, P. Raftery, and F. Bauman. 2018. Full scale laboratory experiment on the cooling capacity of a radiant floor system. Energy and Buildings 170:134–44. doi:10.1016/j.enbuild.2018.03.002
   Web of Science ®Google Scholar
• Saber, E. M., R. Iyengar, M. Mast, F. Meggers, K. W. Tham, and H. Leibundgut. 2014. Thermal comfort and IAQ analysis of a decentralized DOAS system coupled with radiant cooling for the tropics. Building and Environment 82:361–70. doi:10.1016/j.buildenv.2014.09.001
   Web of Science ®Google Scholar
• Sastry, G., and P. Rumsey. 2014. VAV vs. Radiant: Side-by-side comparison. ASHRAE Journal 56 (5):16–24.
   Web of Science ®Google Scholar
• Simmonds, P., S. Holst, S. Reuss, and W. Gaw. 2000. Using radiant cooled floors to condition large spaces and maintain comfort conditions. ASHRAE Transactions 106 (1):695–701.
   Google Scholar
• Sodec, F. 1999. Economic viability of cooling ceiling systems. Energy and Buildings 30 (2):195–201.
   Google Scholar
• Sparrow, M., and R. D. Cess. 1978. Radiation Heat Transfer. 1st ed. Boca Raton: Routledge. doi:10.1201/9780203741382
   Google Scholar
• Stetiu, C. 1999. Energy and peak power savings potential of radiant cooling systems in US commercial buildings. Energy and Buildings 30 (2):127–38. doi:10.1016/S0378-7788(98)00080-2
   Web of Science ®Google Scholar
• U.S. Department of Energy. 2017. Energy savings potential and RD&D opportunities for commercial building HVAC systems. U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy. https://www.energy.gov/sites/prod/files/2017/12/f46/bto-DOE-Comm-HVAC-Report-12-21-17.pdf
   Google Scholar
• U.S. Department of Energy. 2015. An assessment of energy technologies and research opportunities: Chapter 5: Increasing efficiency of building systems and technologies. https://www.energy.gov/sites/prod/files/2017/03/f34/qtr-2015-chapter5.pdf
   Google Scholar
• Woolley, J., S. Schiavon, F. Bauman, P. Raftery, and J. Pantelic. 2018. Side-by-side laboratory comparison of space heat extraction rates and thermal energy use for radiant and all-air systems. Energy and Buildings 176:139–50. doi:10.1016/j.enbuild.2018.06.018
   Web of Science ®Google Scholar
• Zhang, L., H. Yi-Yun, and G. M. Chen. 2007. Experimental study on radiant floor cooling. Building Science and Technology 23 (4):587–91.
   Google Scholar
• Zhao, K., X. H. Liu, and Y. Jiang. 2014. On-site measured performance of a radiant floor cooling/heating system in Xi’an Xianyang International Airport. Solar Energy 108:274–86.
   Web of Science ®Google Scholar