Time-dependent concentration of chlorides at the concrete surface revisited

References

• AASHTO T 259. (2002). Standard method of test for resistance of concrete to chloride ion penetration. Washington, D.C: American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO T 260. (2009). Standard method of test for sampling and testing for chloride ion in concrete and concrete raw materials. Washington, D.C: American Association of State Highway and Transportation Officials.
   Google Scholar
• Andrade, C., Climent, M., & De Vera, G. (2015). Procedure for calculating the chloride diffusion coefficient and surface concentration from a profile having a maximum beyond the concrete surface. Materials and Structures, 48(4), 863–869. doi:10.1617/s11527-015-0543-4
   Web of Science ®Google Scholar
• Andrade, C., Dı́ez, J. M., & Alonso, C. (1997). Mathematical modeling of a concrete surface “skin effect” on diffusion in chloride contaminated media. Advanced Cement Based Materials, 6(2), 39–44. doi:10.1016/S1065-7355(97)00002-3
   Google Scholar
• Andrade, C., & Whiting, D. (1996). A comparison of chloride ion diffusion coefficients derived from concentration gradients and non-steady state accelerated ionic migration. Materials and Structures, 29(8), 476–484. doi:10.1007/BF02486282
   Google Scholar
• Angst, U., Elsener, B., Larsen, C. K., & Vennesland, Ø. (2009). Critical chloride content in reinforced concrete — A review. Cement and Concrete Research, 39(12), 1122–1138. doi:10.1016/j.cemconres.2009.08.006
   Web of Science ®Google Scholar
• Angst, U., & Vennesland, Ø. (2007). Critical chloride content. NORWAY: SINTEF Building and Infrastructure.
   Google Scholar
• Ann, K. Y., Ahn, J. H., & Ryou, J. S. (2009). The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures. Construction and Building Materials, 23(1), 239–245. doi:10.1016/j.conbuildmat.2007.12.014
   Web of Science ®Google Scholar
• Ann, K. Y., Kim, T. S., Kim, J. H., & Kim, S. H. (2010). The resistance of high alumina cement against corrosion of steel in concrete. Construction and Building Materials, 24(8), 1502–1510. doi:10.1016/j.conbuildmat.2010.01.022
   Web of Science ®Google Scholar
• ASTM C1152. (2012). Standard test method for acid-soluble chloride in mortar and concrete. Philadelphia, PA: ASTM International.
   Google Scholar
• ASTM C1202. (2017). Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. West Conshohocken: PA: ASTM International.
   Google Scholar
• ASTM C1218. (2015). Standard test method for water-soluble chloride in mortar and concrete. West Conshohocken, PA.: ASTM International.
   Google Scholar
• ASTM C1556. (2011). Standard test method for determining the apparent chloride diffusion coefficient of cementitious mixtures by bulk diffusion. Philadelphia, PA: ASTM International.
   Google Scholar
• Balestra, C. E. T., Nakano, A. Y., Savaris, G., & Medeiros-Junior, R. A. (2019). Reinforcement corrosion risk of marine concrete structures evaluated through electrical resistivity: Proposal of parameters based on field structures. Ocean Engineering, 187, 106167. doi:10.1016/j.oceaneng.2019.106167
   Web of Science ®Google Scholar
• Bamforth, P. (1999). The derivation of input data for modelling chloride ingress from eight-year UK coastal exposure trials. Magazine of Concrete Research, 51(2), 87–96. doi:10.1680/macr.1999.51.2.87
   Web of Science ®Google Scholar
• Bayuaji, R., Sigit Darmawan, M., Husin, N. A., Anugraha, R. B., Budipriyanto, A., & Stewart, M. G. (2018). Corrosion damage assessment of a reinforced concrete canal structure of power plant after 20years of exposure in a marine environment: A case study. Engineering Failure Analysis, 84, 287–299. doi:10.1016/j.engfailanal.2017.11.014
   Web of Science ®Google Scholar
• Brenna, A., Bolzoni, F., Beretta, S., & Ormellese, M. (2013). Long-term chloride-induced corrosion monitoring of reinforced concrete coated with commercial polymer-modified mortar and polymeric coatings. Construction and Building Materials, 48, 734–744. doi:10.1016/j.conbuildmat.2013.07.099
   Web of Science ®Google Scholar
• Chalee, W., Jaturapitakkul, C. A., & Chindaprasirt, P. (2009). Predicting the chloride penetration of fly ash concrete in seawater. Marine Structures, 22(3), 341–353. doi:10.1016/j.marstruc.2008.12.001
   Web of Science ®Google Scholar
• Chan, S. Y., & Ji, X. (1999). Comparative study of the initial surface absorption and chloride diffusion of high performance zeolite, silica fume and PFA concretes. Cement and Concrete Composites, 21(4), 293–300. doi:10.1016/S0958-9465(99)00010-4
   Web of Science ®Google Scholar
• Chang, H., Mu, S., Xie, D., & Wang, P. (2017). Influence of pore structure and moisture distribution on chloride “maximum phenomenon” in surface layer of specimens exposed to cyclic drying-wetting condition. Construction and Building Materials, 131, 16–30. doi:10.1016/j.conbuildmat.2016.11.071
   Web of Science ®Google Scholar
• Comsol. (2017). COMSOL Multiphysics User’s Guide, version 5.3. Stockholm, Sweden: Comsol AB.
   Google Scholar
• Costa, A., & Appleton, J. (1999). Chloride penetration into concrete in marine environment—part i: Main parameters affecting chloride penetration. Materials and Structures, 32(4), 252. doi:10.1007/BF02479594
   Google Scholar
• Crank, J. (1979). The mathematics of diffusion. Bristol, England: Oxford university press.
   Google Scholar
• Da Costa, A., Fenaux, M., Fernández, J., Sánchez, E., & Moragues, A. (2013). Modelling of chloride penetration into non-saturated concrete: Case study application for real marine offshore structures. Construction and Building Materials, 43, 217–224. doi:10.1016/j.conbuildmat.2013.02.009
   Web of Science ®Google Scholar
• De Medeiros-junior, R. A., De Lima, M. G., De Brito, P. C., & De Medeiros, M. H. F. (2015). Chloride penetration into concrete in an offshore platform-analysis of exposure conditions. Ocean Engineering, 103, 78–87. doi:10.1016/j.oceaneng.2015.04.079
   Web of Science ®Google Scholar
• De Rincón, O. T., Castro, P., Moreno, E., Torres-Acosta, A., De Bravo, O. M., Arrieta, I., Garcı́a, C., Garcı́a, D., & Martı́nez-Madrid, M. (2004). Chloride profiles in two marine structures—meaning and some predictions. Building and Environment, 39(9), 1065–1070. doi:10.1016/j.buildenv.2004.01.036
   Web of Science ®Google Scholar
• Di Bella, C., Villani, C., Hausheer, E., & Weiss, J. (2012). Chloride transport measurements for a plain and internally cured concrete mixture. ACI Special Publication, 290, 1–16.
   Google Scholar
• Dousti, A., Rashetnia, R., Ahmadi, B., & Shekarchi, M. (2013). Influence of exposure temperature on chloride diffusion in concretes incorporating silica fume or natural zeolite. Construction and Building Materials, 49, 393–399. doi:10.1016/j.conbuildmat.2013.08.086
   Web of Science ®Google Scholar
• Fib. 2006. Model code for service life design. International Federation for Structural Concrete (fib) 34. Lausanne, Switzerland: International Federation for Structural Concrete.
   Google Scholar
• Florea, M. V. A., & Brouwers, H. J. H. (2012). Chloride binding related to hydration products part I: Ordinary Portland cement. Cement and Concrete Research, 42(2), 282–290. doi:10.1016/j.cemconres.2011.09.016
   Web of Science ®Google Scholar
• Fraj, A. B., Bonnet, S., & Khelidj, A. (2012). New approach for coupled chloride/moisture transport in non-saturated concrete with and without slag. Construction and Building Materials, 35, 761–771. doi:10.1016/j.conbuildmat.2012.04.106
   Web of Science ®Google Scholar
• Frederiksen, J. M., Mejlbro, L., & Poulsen, E. 2000. “The HETEK model of chloride ingress into concrete made simpler by approximations.” Second International RILEM Workshop on Testing and Modelling the Chloride Ingress into Concrete. eds. C. Andrade & J. Kropp. France, Paris: RILEM Publications SARL.
   Google Scholar
• Gao, Y.-H., Zhang, J.-Z., Zhang, S., & Zhang, Y.-R. (2017). Probability distribution of convection zone depth of chloride in concrete in a marine tidal environment. Construction and Building Materials, 140, 485–495. doi:10.1016/j.conbuildmat.2017.02.134
   Web of Science ®Google Scholar
• IBM. (2020). IBM SPSS statistics for Windows, version 24.0. New York:: IBM Corp 440.
   Google Scholar
• Isgor, O. B., & Razaqpur, A. G. (2004). Finite element modeling of coupled heat transfer, moisture transport and carbonation processes in concrete structures. Cement & Concrete Composites, 26(1), 57–73. doi:10.1016/S0958-9465(02)00125-7
   Web of Science ®Google Scholar
• Ishida, T., Iqbal, P. O. N., & Anh, H. T. L. (2009). Modeling of chloride diffusivity coupled with non-linear binding capacity in sound and cracked concrete. Cement and Concrete Research, 39(10), 913–923. doi:10.1016/j.cemconres.2009.07.014
   Web of Science ®Google Scholar
• Jafari Azad, V., & Isgor, O. B. (2016). A thermodynamic perspective on chloride limits of concrete produced with SCMs. ACI Special Publication, 308, 1–18.
   Google Scholar
• Jafari Azad, V., Li, C., Verba, C., Ideker, J. H., & Isgor, O. B. (2016). A COMSOL-GEMS interface for modeling coupled reactive-transport geochemical processes. Computers & Geosciences, 92, 79–89. doi:10.1016/j.cageo.2016.04.002
   Web of Science ®Google Scholar
• Jafari Azad, V., Suraneni, P., Isgor, O. B., & Weiss, W. J. (2017). Interpreting the pore structure of hydrating cement phases through a synergistic use of the powers-brownyard model, hydration kinetics, and thermodynamic calculations. Advances in Civil Engineering Materials, 6(1), 1–16. doi:10.1520/ACEM20160038
   Web of Science ®Google Scholar
• Kassir, M. K., & Ghosn, M. (2002). Chloride-induced corrosion of reinforced concrete bridge decks. Cement and Concrete Research, 32(1), 139–143. doi:10.1016/S0008-8846(01)00644-5
   Web of Science ®Google Scholar
• Kearsley, E., & Wainwright, P. (2001). Porosity and permeability of foamed concrete. Cement and Concrete Research, 31(5), 805–812. doi:10.1016/S0008-8846(01)00490-2
   Web of Science ®Google Scholar
• Kim, J., McCarter, W. J., Suryanto, B., Nanukuttan, S., Basheer, P. M., & Chrisp, T. M. (2016a). Chloride ingress into marine exposed concrete: A comparison of empirical-and physically-based models. Cement and Concrete Composites, 72, 133–145. doi:10.1016/j.cemconcomp.2016.06.002
   Web of Science ®Google Scholar
• Kim, M. J., Kim, K. B., & Ann, K. Y. (2016b). The influence of C3A content in cement on the chloride transport. Advances in Materials Science and Engineering, 2016.
   Web of Science ®Google Scholar
• Kwon, S.-J., Lee, H.-S., Karthick, S., Saraswathy, V., & Yang, H.-M. (2017). Long-term corrosion performance of blended cement concrete in the marine environment – A real-time study. Construction and Building Materials, 154, 349–360. doi:10.1016/j.conbuildmat.2017.07.237
   Web of Science ®Google Scholar
• Lothenbach, B., Matschei, T., Moschner, G., & Glasser, F. P. (2008). Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement. Cement and Concrete Research, 38(1), 1–18. doi:10.1016/j.cemconres.2007.08.017
   Web of Science ®Google Scholar
• Lu, C., Gao, Y., Cui, Z., & Liu, R. (2015). Experimental analysis of chloride penetration into concrete subjected to drying–wetting cycles. Journal of Materials in Civil Engineering, 27(12), 04015036. doi:10.1061/(ASCE)MT.1943-5533.0001304
   Web of Science ®Google Scholar
• Luping, T., & Gulikers, J. (2007). On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete. Cement and Concrete Research, 37(4), 589–595. doi:10.1016/j.cemconres.2007.01.006
   Web of Science ®Google Scholar
• Luping, T., & Nilsson, L.-O. (1993). Rapid determination of the chloride diffusivity in concrete by applying an electric field. Materials Journal, 89(1), 49–53.
   Google Scholar
• Makridakis, S. (1993). Accuracy measures: Theoretical and practical concerns. International Journal of Forecasting, 9(4), 527–529. doi:10.1016/0169-2070(93)90079-3
   Web of Science ®Google Scholar
• Malheiro, R., Meira, G., Lima, M., & Perazzo, N. (2011). Influence of mortar rendering on chloride penetration into concrete structures. Cement and Concrete Composites, 33(2), 233–239. doi:10.1016/j.cemconcomp.2010.11.003
   Web of Science ®Google Scholar
• Mangat, P., & Limbachiya, M. (1999). Effect of initial curing on chloride diffusion in concrete repair materials. Cement and Concrete Research, 29(9), 1475–1485. doi:10.1016/S0008-8846(99)00130-1
   Web of Science ®Google Scholar
• Mangat, P., & Molloy, B. (1995). Chloride binding in concrete containing PFA, gbs or silica fume under sea water exposure. Magazine of Concrete Research, 47(171), 129–141. doi:10.1680/macr.1995.47.171.129
   Web of Science ®Google Scholar
• Marchand, J. (2001). Modeling the behavior of unsaturated cement systems exposed to aggressive chemical environments. Materials and Structures, 34(4), 195–200. doi:10.1007/BF02480588
   Google Scholar
• Martın-Pérez, B., Zibara, H., Hooton, R., & Thomas, M. (2000). A study of the effect of chloride binding on service life predictions. Cement and Concrete Research, 30(8), 1215–1223. doi:10.1016/S0008-8846(00)00339-2
   Web of Science ®Google Scholar
• Meira, G. R., Andrade, C., Padaratz, I., Alonso, C., & Borba Jr, J. (2007). Chloride penetration into concrete structures in the marine atmosphere zone–relationship between deposition of chlorides on the wet candle and chlorides accumulated into concrete. Cement and Concrete Composites, 29(9), 667–676. doi:10.1016/j.cemconcomp.2007.05.009
   Web of Science ®Google Scholar
• Mohammed, T. U., Yamaji, T., & Hamada, H. (2002). Chloride diffusion, microstructure, and mineralogy of concrete after 15 years of exposure in tidal environment. ACI Materials Journal, 99(3), 256–263.
   Web of Science ®Google Scholar
• Moradllo, K. M., Shekarchi, M., & Hoseini, M. (2012). Time-dependent performance of concrete surface coatings in tidal zone of marine environment. Construction and Building Materials, 30, 198–205. doi:10.1016/j.conbuildmat.2011.11.044
   Web of Science ®Google Scholar
• Na, O., & Xi, Y. (2019). Parallel finite element model for multispecies transport in nonsaturated concrete structures. Materials, 12(17), 2764. doi:10.3390/ma12172764
   PubMed Web of Science ®Google Scholar
• Nagesh, M., & Bhattacharjee, B. (1998). Modeling of chloride diffusion in concrete and determination of diffusion coefficients. Materials Journal, 95(2), 113–120.
   Google Scholar
• Neter, J., Kutner, M. H., Nachtsheim, C. J., & Wasserman, W. (1996). Applied linear statistical models (Vol. 4). New York, USA: McGraw-Hill/Irwin.
   Google Scholar
• Nielsen, E. P., & Geiker, M. R. (2003). Chloride diffusion in partially saturated cementitious material. Cement and Concrete Research, 33(1), 133–138. doi:10.1016/S0008-8846(02)00939-0
   Web of Science ®Google Scholar
• Nilsson, L.-O. (2009). Models for chloride ingress into concrete–from Collepardi to today. International Journal of Modelling, Identification and Control, 7(2), 129–134. doi:10.1504/IJMIC.2009.027065
   Google Scholar
• NT Build 443. (1995). Concrete, hardened: Accelerated chloride penetration. Espoo, Finland: Nordtest method.
   Google Scholar
• NT Build 492. (1999). Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non-steady-state migration experiments. Espoo, Finland: Nordtest method.
   Google Scholar
• Oh, B. H., & Jang, S. Y. (2007). Effects of material and environmental parameters on chloride penetration profiles in concrete structures. Cement and Concrete Research, 37(1), 47–53. doi:10.1016/j.cemconres.2006.09.005
   Web of Science ®Google Scholar
• Page, C., & Vennesland, Ø. (1983). Pore solution composition and chloride binding capacity of silica-fume cement pastes. Matériaux et Construction, 16(1), 19–25. doi:10.1007/BF02474863
   Google Scholar
• Pang, L., & Li, Q. (2016). Service life prediction of RC structures in marine environment using long term chloride ingress data: Comparison between exposure trials and real structure surveys. Construction and Building Materials, 113, 979–987. doi:10.1016/j.conbuildmat.2016.03.156
   Web of Science ®Google Scholar
• Petcherdchoo, A. (2013). Time dependent models of apparent diffusion coefficient and surface chloride for chloride transport in fly ash concrete. Construction and Building Materials, 38, 497–507. doi:10.1016/j.conbuildmat.2012.08.041
   Web of Science ®Google Scholar
• Petcherdchoo, A. (2015). Repairs by fly ash concrete to extend service life of chloride-exposed concrete structures considering environmental impacts. Construction and Building Materials, 98, 799–809. doi:10.1016/j.conbuildmat.2015.08.120
   Web of Science ®Google Scholar
• Petcherdchoo, A. (2017). Closed-form solutions for bilinear surface chloride functions applied to concrete exposed to deicing salts. Cement and Concrete Research, 102(Supplement C), 136–148. doi:10.1016/j.cemconres.2017.09.007
   Google Scholar
• Phurkhao, P., & Kassir, M. (2005). Note on chloride-induced corrosion of reinforced concrete bridge decks. Journal of Engineering Mechanics, 131(1), 97–99. doi:10.1061/(ASCE)0733-9399(2005)131:1(97)
   Web of Science ®Google Scholar
• Polder, R. B., & De Rooij, M. R. (2005). Durability of marine concrete structures: Field investigations and modelling. Heron, 50(3),427–435.
   Google Scholar
• Polder, R. B., & Peelen, W. H. (2002). Characterisation of chloride transport and reinforcement corrosion in concrete under cyclic wetting and drying by electrical resistivity. Cement and Concrete Composites, 24(5), 427–435. doi:10.1016/S0958-9465(01)00074-9
   Web of Science ®Google Scholar
• Poulsen, E., & Mejlbro, L. (2010). Diffusion of chloride in concrete: Theory and application. New York, USA: CRC Press.
   Google Scholar
• Qiao, C., Suraneni, P., Ying, T. N. W., Choudhary, A., & Weiss, J. (2019). Chloride binding of cement pastes with fly ash exposed to CaCl2 solutions at 5 and 23° C. Cement and Concrete Composites, 97, 43–53. doi:10.1016/j.cemconcomp.2018.12.011
   Web of Science ®Google Scholar
• Rawlings, J. O., Pantula, S. G., & Dickey, D. A. (2001). Applied regression analysis: A research tool. New York, USA: Springer Science & Business Media.
   Google Scholar
• Rohatgi, A. (2017). WebPlotDigitizer. Austin, Texas: USA.
   Google Scholar
• Ryou, J., & Ann, K. (2008). Variation in the chloride threshold level for steel corrosion in concrete arising from different chloride sources. Magazine of Concrete Research, 60(3), 177–187. doi:10.1680/macr.2008.60.3.177
   Web of Science ®Google Scholar
• Safehian, M., & Ramezanianpour, A. A. (2013). Assessment of service life models for determination of chloride penetration into silica fume concrete in the severe marine environmental condition. Construction and Building Materials, 48, 287–294. doi:10.1016/j.conbuildmat.2013.07.006
   Web of Science ®Google Scholar
• Sahmaran, M., Li, M., & Li, V. C. (2007). Transport properties of engineered cementitious composites under chloride exposure. ACI Materials Journal, 104(6), 604.
   Web of Science ®Google Scholar
• Saillio, M., Baroghel-Bouny, V., & Barberon, F. (2014). Chloride binding in sound and carbonated cementitious materials with various types of binder. Construction and Building Materials, 68, 82–91. doi:10.1016/j.conbuildmat.2014.05.049
   Web of Science ®Google Scholar
• Samson, E., & Marchand, J. (1999). Numerical solution of the extended Nernst-Planck model. Journal of Colloid and Interface Science, 215(1), 1–8. doi:10.1006/jcis.1999.6145
   PubMed Web of Science ®Google Scholar
• Samson, E., & Marchand, J. (2007). Modeling the effect of temperature on ionic transport in cementitious materials. Cement and Concrete Research, 37(3), 455–468. doi:10.1016/j.cemconres.2006.11.008
   Web of Science ®Google Scholar
• Samson, E., Marchand, J., Robert, J. L., & Bournzel, J. P. (1999). Modelling ion diffusion mechanisms in porous media. International Journal for Numerical Methods in Engineering, 46(12), 2043–2060. doi:10.1002/(SICI)1097-0207(19991230)46:12<2043::AID-NME795>3.0.CO;2-7
   Web of Science ®Google Scholar
• Santhanam, M., & Otieno, M. (2016). Deterioration of concrete in the marine environment. In Marine Concrete Structures,ed. Mark Alexander (pp. 137–149). Cambridge, USA: Woodhead Publishing.
   Google Scholar
• Shakouri, M., & Trejo, D. (2017). A time-variant model of surface chloride build-up for improved service life predictions. Cement and Concrete Composites, 84, 99–110. doi:10.1016/j.cemconcomp.2017.08.008
   Web of Science ®Google Scholar
• Shakouri, M., Trejo, D., & Gardoni, P. 2016. “A risk-based model for determining allowable admixed chloride limits in concrete.” International RILEM Conference on Materials, Systems and Structures in Civil Engineering: Conference segment on service life of cement-based materials and structures, Lyngby, Denmark.
   Google Scholar
• Shakouri, M., Vaddey, N. P., & Trejo, D. (2019). Effect of admixed and external chlorides on transport of chlorides in concrete. ACI Materials Journal, 116(5), 119–128. doi:10.14359/51716833
   Web of Science ®Google Scholar
• Song, H. W., Lee, C. H., & Ann, K. Y. (2008). Factors influencing chloride transport in concrete structures exposed to marine environments. Cement and Concrete Composites, 30(2), 113–121. doi:10.1016/j.cemconcomp.2007.09.005
   Web of Science ®Google Scholar
• Song, L., Sun, W., & Gao, J. (2013). Time dependent chloride diffusion coefficient in concrete. Journal of Wuhan University of Technology-Mater. Sci. Ed., 28(2), 314–319. doi:10.1007/s11595-013-0685-6
   Web of Science ®Google Scholar
• Song, Z., Jiang, L., Chu, H., Xiong, C., Liu, R., & You, L. (2014). Modeling of chloride diffusion in concrete immersed in CaCl2 and NaCl solutions with account of multi-phase reactions and ionic interactions. Construction and Building Materials, 66(Supplement C), 1–9. doi:10.1016/j.conbuildmat.2014.05.026
   Google Scholar
• Stanish, K., & Thomas, M. (2003). The use of bulk diffusion tests to establish time-dependent concrete chloride diffusion coefficients. Cement and Concrete Research, 33(1), 55–62. doi:10.1016/S0008-8846(02)00925-0
   Web of Science ®Google Scholar
• Swamy, R., Hamada, H., Fukute, T., Tanikawa, S., & Laiw, J. (1995). Chloride penetration into concrete incorporating mineral admixtures or protected with surface coating material under chloride environments. Proc. Of CONSEC, 95(2), 935–944.
   Google Scholar
• Trejo, D., Vaddey, N. P., & Shakouri, M. (2019). Factors influencing chloride test results of cementitious systems. ACI Materials Journal, 16(1), 135–145.
   Google Scholar
• Uji, K., Matsuoka, Y., & Maruya, T. (1990). Formulation of an equation for surface chloride content of concrete due to permeation of chloride.  Paper presented at the 3rd International Symposium on Corrosion of Reinforcement in Concrete Construction, Warwickshire, UK, 258–267.
   Google Scholar
• Wang, H.-L., Dai, J.-G., & Sun, X.-Y. (2017). Chloride transport in concrete under sustained flexural loading. Magazine of Concrete Research, 69(5), 245–254. doi:10.1680/jmacr.16.00247
   Web of Science ®Google Scholar
• Wang, Y., Shui, Z., Gao, X., Yu, R., Huang, Y., & Cheng, S. (2019). Understanding the chloride binding and diffusion behaviors of marine concrete based on Portland limestone cement-alumina enriched pozzolans. Construction and Building Materials, 198, 207–217. doi:10.1016/j.conbuildmat.2018.11.270
   Web of Science ®Google Scholar
• Wu, J., Li, H., Wang, Z., & Liu, J. (2016). Transport model of chloride ions in concrete under loads and drying-wetting cycles. Construction and Building Materials, 112, 733–738. doi:10.1016/j.conbuildmat.2016.02.167
   Web of Science ®Google Scholar
• Wu, L., Li, W., & Yu, X. (2017). Time-dependent chloride penetration in concrete in marine environments. Construction and Building Materials, 152, 406–413. doi:10.1016/j.conbuildmat.2017.07.016
   Web of Science ®Google Scholar
• Yuan, Q., Shi, C., De Schutter, G., Audenaert, K., & Deng, D. (2009). Chloride binding of cement-based materials subjected to external chloride environment–a review. Construction and Building Materials, 23(1), 1–13. doi:10.1016/j.conbuildmat.2008.02.004
   Web of Science ®Google Scholar
• Zhao, Y., Xu, X., Wang, Y., & Dong, J. (2020). Characteristics of pitting corrosion in an existing reinforced concrete beam exposed to marine environment. Construction and Building Materials, 234, 117392. doi:10.1016/j.conbuildmat.2019.117392
   Web of Science ®Google Scholar
• Zhao, Y.-X., Chen, C., Gao, X.-J., & Jin, W.-L. (2013). Seasonal variation of surface chloride ion content and chloride diffusion coefficient in a concrete dock. Advances in Structural Engineering, 16(2), 395–403. doi:10.1260/1369-4332.16.2.395
   Web of Science ®Google Scholar
• Zuquan, J., Xia, Z., Tiejun, Z., & Jianqing, L. (2018). Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones. Construction and Building Materials, 177, 170–183. doi:10.1016/j.conbuildmat.2018.05.120
   Web of Science ®Google Scholar