Best practices for measurement, sensing, and quantifying corrosion in existing reinforced concrete structures

References

• ACI 222R-19. (2019). Guide to protection of metals in concrete against corrosion. American Concrete Institute, Farmington Hills, MI.
   Google Scholar
• ACI 228.2R-13. (2013). Report on nondestructive test methods for evaluation of concrete in structures. American Concrete Institute, Farmington Hills, MI.
   Google Scholar
• Alonso, C., Andrade, C., & Gonzalez, J. A. (1988). Relation between resistivity and corrosion rate of reinforcements in carbonated mortar made with several cement types. Cement and Concrete Research, 18(5), 687–698. doi:10.1016/0008-8846(88)90091-9
   Web of Science ®Google Scholar
• Andrade, C., Alonso, C. & Sarria, J. (2002). Corrosion rate eevolution in concrete structures exposed to the atmosphere. Cement. Concrete Composites, 24(2002), 55–64. doi:10.1016/S0958-9465(01)00026-9
   Google Scholar
• Ansuini, F. J. & Dimond, J. R. (1994). Factors affecting the accuracy of reference electrodes. Materials Performance, 33(11), 14–17.
   Web of Science ®Google Scholar
• ASTM C 856-2015, (2015). Standard test method for corrosion potentials of uncoated reinforcing steel in concrete, ASTM International, West Conshohocken, PA
   Google Scholar
• ASTM C1556-11a(2016). (2016). Standard test method for determining the apparent chloride diffusion coefficient of cementitious mixtures by bulk diffusion, ASTM International, West Conshohocken, PA
   Google Scholar
• ASTM C42/C42M-20, (2020). Standard test method for obtaining and testing drilled cores and sawed beams of concrete. ASTM International, West Conshohocken, PA.
   Google Scholar
• ASTM D4748-10(2015), (2015). Standard test method for determining the thickness of bound pavement layers using short-pulse radar, ASTM International, West Conshohocken, PA
   Google Scholar
• Benedetto, A., Manacorda, G., Simi, A. & Tosti, F. (2012). Novel perspectives in bridges inspection using GPR. Non-destructive Testing and Evaluation, 27(3), 239–251. doi:10.1080/10589759.2012.694883
   Web of Science ®Google Scholar
• Bertolini, L., Elsener, B., Pedeferri, P., Redaelli, E. & Polder, R. (2013). Corrosion of steel in concrete (Vol. 392). Weinheim, Germany: Wiley-Vch.
   Google Scholar
• Boulay, C., Dal Pont, S. & Belin, P. (2009). Real-time evolution of electrical resistance in cracking concrete. Cement and Concrete Research, 39(9), 825–831. doi:10.1016/j.cemconres.2009.06.003
   Web of Science ®Google Scholar
• Carino, N. J. (1992). Performance of electromagnetic covermeters for nondestructive assessment of steel reinforcement. NISTIR 4988, National Institute of Standards and Technology, Gaithersburg, MD, 130.
   Google Scholar
• Chang, C. W., Lin, C. H. & Lien, H. S. (2009). Measurement radius of reinforcing steel bar in concrete using digital image GPR. Construction and Building Materials, 23(2), 1057–1063. doi:10.1016/j.conbuildmat.2008.05.018
   Web of Science ®Google Scholar
• Clemeña, G. G. (1983). Non-destructive inspection of overlaid bridge decks with ground-penetrating radar. In Transportation Research Record No. 899 Transportation Research Board Washington, DC. (pp. 21–32)
   Google Scholar
• COST 521. (Sep 2003). Corrosion of steel in reinforced concrete structuresEuropean cooperation in the field of scientific and technical research. Tech. Rep, 521
   Google Scholar
• Enevoldsen, J. N., Hansson, C. M. & Hope, B. B. (1994). The influence of internal relative humidity on the rate of corrosion of steel embedded in concrete and mortar. Cement and Concrete Research, 24(7), 1373–1382. doi:10.1016/0008-8846(94)90122-8
   Web of Science ®Google Scholar
• Ghods, P., Alizadeh, R., & Salehi, M. (2017). U.S. Patent No. 9,638,652. Washington, DC: U.S. Patent and Trademark Office.
   Google Scholar
• Gowers, K. & Millard, S. (1999). Measurement of concrete resistivity for assessment of corrosion. ACI Materials Journal, 96(5), 536–541.
   Web of Science ®Google Scholar
• Grasley, Z. C., Lange, D. A., D’Ambrosia, M. D. & Villalobos-Chapa, S. Relative humidity in concrete. Concrete International, American Concrete Institute, October, pp. 51–57.
   Google Scholar
• Hornbostel, K., Larsen, C. K. & Geiker, M. R. (2013). Relationship between concrete resistivity and corrosion rate–A literature review. Cement and Concrete Composites, 39, 60–72. doi:10.1016/j.cemconcomp.2013.03.019
   Web of Science ®Google Scholar
• Hugenschmidt, J. & Mastrangelo, R. (2006). GPR inspection of concrete bridges. Cement and Concrete Composites, 28(4), 384–392. doi:10.1016/j.cemconcomp.2006.02.016
   Web of Science ®Google Scholar
• Liu, D. W., Deng, Y., Yang, F. & Xu, G. Y. (2005). Non-destructive testing for crack of tunnel lining using GPR. Journal of Central South University of Technology, 12(1), 120–124. doi:10.1007/s11771-005-0384-3
   Google Scholar
• Monfore, G. E. (1968). The electrical resistivity of concrete. Portland Cement Association. Research and Development Laboratories, Skokie, Il.
   Google Scholar
• NACE Pub 11100 (2000), Use of reference electrodes for atmospherically exposed concrete structures. NACE International, Houston, TX, 2000.
   Google Scholar
• NACE Pub 35108 (2008), One hundred millivolt (mV) cathodic polarization criterion. NACE International, Houston, TX., 2008
   Google Scholar
• NACE SP0107-2017. (2017). Electrochemical realkalization and chloride extraction for reinforced concrete. NACE International, Houston Texas.
   Google Scholar
• NACE SP0290-2007. (2007). Standard practice for impressed current cathodic protection of reinforcing steel in atmospherically exposed concrete structures. NACE International, Houston, TX
   Google Scholar
• NACE SP0308-2018-SG. (2018). Inspection methods for corrosion evaluation of conventionally reinforced concrete structures. NACE International, Houston Texas
   Google Scholar
• Norris, A., Saafi, M. & Romine, P. (2008). Temperature and moisture monitoring in concrete structures using embedded nanotechnology/microelectromechanical systems (MEMS) sensors. o Construction and building materials 22(2), 111–120, doi:10.1016/j.conbuildmat.2006.05.047.
   Google Scholar
• Novokshchenov, V. (1997). Corrosion surveys of prestressed bridge members using a half-cell potential technique. Corrosion, 53(6), 489–498. doi:10.5006/1.3280492
   Web of Science ®Google Scholar
• Pacheco, J., Morales-Nápoles, O., & Polder, R. B. (2012). Statistical analysis of electrical resistivity as a tool for estimating cement type of 12-year-old concrete specimens. In International Conference on Concrete Repair, Rehabilitation and Retrofitting III, M. Alexander et al. (eds.), Taylor & Francis, London (pp. 701–706). Cape Town, South Africa.
   Google Scholar
• Pacheco, J., Šavija, B., Schlangen, E. & Polder, R. B. (2014). Assessment of cracks in reinforced concrete by means of electrical resistance and image analysis. Construction and Building Materials, 65, 417–426. doi:10.1016/j.conbuildmat.2014.05.001
   Web of Science ®Google Scholar
• Permeh, S., Krishna Vigneshwaran, K. K., Echeverría, M., Lau, K. & Lasa, I. (2018). Corrosion of post-tensioned tendons with deficient grout, part 2: Segregated grout with elevated sulfate content. Corrosion, 74(4), 457–467. doi:10.5006/2568
   Web of Science ®Google Scholar
• Permeh, S., Krishna Vigneshwaran, K. K., Lau, K. & Lasa, I. (2019). Corrosion of post-tensioned tendons with deficient grout, part 3: segregated grout with elevated sulfate and vestigial chloride content. Corrosion, 75(7), 848–864. doi:10.5006/3097
   Web of Science ®Google Scholar
• Polder, R., Andrade, C., Elsener, B., Vennesland, Ø., Gulikers, J., Weidert, R. & Raupach, M. (2000). Test methods for on site measurement of resistivity of concrete. Materials and Structures, 33(10), 603–611. doi:10.1007/BF02480599
   Google Scholar
• Reichling, K. & Raupach, M. Measurement and visualisation of the actual concrete resistivity in consideration of conductive layers and reinforcement bars. In International Conference on Concrete Repair, Rehabilitation and Retrofitting III, M. Alexander et al. (eds.), Taylor & Francis, London, pp. 707–714. 2012. Cape Town, South Africa.
   Google Scholar
• Reis, R. A. (2007). Corrosion evaluation and tensile results of selected post-tensioning strands at the SFOBB skyway seismic replacement project. Materials Engineering and Testing Services, Office of Testing and Technology Services Corrosion Technology Branch, Sacramento, California.
   Google Scholar
• RILEM, TC. 154-EMC. (2003). Recommendations of RILEM TC 154-EMC: Electrochemical techniques for measuringmetallic corrosion Half-cell potential measurements -Potential mapping on reinforced concrete structures.Materials Structures, 36(261), 461–471. doi:10.1617/13718
   Google Scholar
• Salas, R. M., Schokker, A. J., West, J. S., Breen, J. E. & Kreger, M. E. (2008). Corrosion risk of bonded, post-tensioned concrete elements. PCI Journal, 53(1), 89. doi:10.15554/pcij.01012008.89.108
   Web of Science ®Google Scholar
• Stern, M. & Geary, A. L. (1957). Electrochemical polarization I. A theoretical analysis of the shape of polarization curves. Journal of the Electrochemical Society, 104(1), 56–63. doi:10.1149/1.2428496
   Web of Science ®Google Scholar
• Whiting, D. A., & Nagi, M. A. (2003). Electrical resistivity of concrete-a literature review. PCA R&D Serial, 2457. Portland Cement Association, Skokie, IL.
   Google Scholar