References
- Battini, D., Faccio, M., Persona, A., & Sgarbossa, F. (2011). New methodological framework to improve productivity and ergonomics in assembly system design. International Journal of Industrial Ergonomics, 41(1), 30–42. https://doi.org/https://doi.org/10.1016/j.ergon.2010.12.001
- Berlin, C., & Adams, C. (2017). Production ergonomics: Designing work systems to support optimal human performance. Ubiquity Press. https://doi.org/https://doi.org/10.5334/bbe
- Bogojevic, L., & Söderlund, H. (2020). Simulations of ergonomic assembly: Ergonomic evaluation using the digital human modelling tool IMMA [Thesis]. Chalmers University of Technology. https://odr.chalmers.se/handle/20.500.12380/301573
- Brolin, E., Högberg, D., Hanson, L., & Örtengren, R. (2016). Generation and evaluation of distributed cases by clustering of diverse anthropometric data. International Journal of Human Factors Modelling and Simulation, 5(3), 210–229. https://doi.org/https://doi.org/10.1504/IJHFMS.2016.079706
- Bubb, H., Engstler, F., Fritzsche, F., Mergl, C., Sabbah, O., Schaefer, P., & Zacher, I. (2006). The development of RAMSIS in past and future as an example for the cooperation between industry and university. International Journal of Human Factors Modelling and Simulation, 1(1), 140–157. https://doi.org/https://doi.org/10.1504/IJHFMS.2006.011686
- Dalle Mura, M., & Dini, G. (2019). Optimizing ergonomics in assembly lines: A multi objective genetic algorithm. CIRP Journal of Manufacturing Science and Technology, 27, 31–45. https://doi.org/https://doi.org/10.1016/j.cirpj.2019.08.004
- Deb, K., & Jain, H. (2014). An evolutionary many-objective optimization algorithm using reference-point-based non-dominated sorting approach, Part I: Solving problems with box constraints. IEEE Transactions on Evolutionary Computation, 18(4), 577–601. https://doi.org/https://doi.org/10.1109/TEVC.2013.2281535
- Deb, K., Pratap, A., Agarwal, S., & Meyarivan, T. (2002). A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Transactions on Evolutionary Computation, 6(2), 182–197. https://doi.org/https://doi.org/10.1109/4235.996017
- Eklund, J. A. E. (1995). Relationships between ergonomics and quality in assembly work. Applied Ergonomics, 26(1), 15–20. https://doi.org/https://doi.org/10.1016/0003-6870(95)95747-N
- Falck, A.-C., Örtengren, R., & Högberg, D. (2010). The impact of poor assembly ergonomics on product quality: A cost–benefit analysis in car manufacturing. Human Factors and Ergonomics in Manufacturing & Service Industries, 20(1), 24–41. https://doi.org/https://doi.org/10.1002/hfm.20172
- Fisher, D. L., Rizzo, M., Caird, J., & Lee, J. D. (2011). Handbook of driving simulation for engineering, medicine, and psychology. CRC Press.
- Gašová, M., Gašo, M., & Štefánik, A. (2017). Advanced industrial tools of ergonomics based on Industry 4.0 concept. Procedia Engineering, 192, 219–224. https://doi.org/https://doi.org/10.1016/j.proeng.2017.06.038
- Greco, A., Caterino, M., Fera, M., & Gerbino, S. (2020). Digital twin for monitoring ergonomics during manufacturing production. Applied Sciences, 10(21), 7758. https://doi.org/https://doi.org/10.3390/app10217758
- Green, R. F. (2000). A generic process for human model analysis (SAE Technical Paper No. 2000-01–2167) [Paper presentation]. SAE International. https://doi.org/https://doi.org/10.4271/2000-01-2167
- Hanson, L., Blomé, M., Dukic, T., & Högberg, D. (2006). Guide and documentation system to support digital human modeling applications. International Journal of Industrial Ergonomics, 36(1), 17–24. https://doi.org/https://doi.org/10.1016/j.ergon.2005.06.006
- Hanson, L., Högberg, D., Carlson, J. S., Delfs, N., Brolin, E., Mårdberg, P., Spensieri, D., Björkenstam, S., Nyström, J., & Ore, F. (2019). Industrial path solutions: Intelligently moving manikins. In S. Scataglini & G. Paul (Eds.), DHM and posturography (pp. 115–124). Academic Press. https://doi.org/https://doi.org/10.1016/B978-0-12-816713-7.00011-8
- Hanson, L., Högberg, D., & Söderholm, M. (2012). Digital test assembly of truck parts with the IMMA-tool: An illustrative case. Work, 41(Supplement 1), 2248–2252. https://doi.org/https://doi.org/10.3233/WOR-2012-0447-2248
- Harari, Y., Bechar, A., & Riemer, R. (2019). Simulation-based optimization methodology for a manual material handling task design that maximizes productivity while considering ergonomic constraints. IEEE Transactions on Human-Machine Systems, 49(5), 440–448. https://doi.org/https://doi.org/10.1109/THMS.2019.2900294
- Havard, V., Jeanne, B., Lacomblez, M., & Baudry, D. (2019). Digital twin and virtual reality: A co-simulation environment for design and assessment of industrial workstations. Production & Manufacturing Research, 7(1), 472–489. https://doi.org/https://doi.org/10.1080/21693277.2019.1660283
- Hignett, S., & McAtamney, L. (2000). Rapid entire body assessment: REBA. Applied Ergonomics, 31(2), 201–205.
- Högberg, D., Hanson, L., Bohlin, R., & Carlson, J. S. (2016). Creating and shaping the DHM tool IMMA for ergonomic product and production design. International Journal of the Digital Human, 1(2), 132–152. https://doi.org/https://doi.org/10.1504/IJDH.2016.077413
- Iriondo Pascual, A., Högberg, D., Syberfeldt, A., Brolin, E., García Rivera, F., Pérez Luque, E., & Hanson, L. (2020, August 31–September 2). Implementation of ergonomics evaluation methods in a multi-objective optimization framework. In L. Hanson, D. Högberg, & E. Brolin (Eds.), Advances in transdisciplinary engineering (Vol. 11, pp. 361–371). IOS Press, Amsterdam. http://ebooks.iospress.nl/volumearticle/55321
- Kadir, B. A., Broberg, O., & Conceição, C. S. d. (2019). Current research and future perspectives on human factors and ergonomics in Industry 4.0. Computers & Industrial Engineering, 137, 106004. https://doi.org/https://doi.org/10.1016/j.cie.2019.106004
- Karhu, O., Kansi, P., & Kuorinka, I. (1977). Correcting working postures in industry: A practical method for analysis. Applied Ergonomics, 8(4), 199–201.
- Kuhn, W. (2006). Digital factory – Simulation enhancing the product and production engineering process [Paper presentation]. Proceedings of the 2006 Winter Simulation Conference (pp. 1899–1906). https://doi.org/https://doi.org/10.1109/WSC.2006.322972
- March, S. T., & Smith, G. F. (1995). Design and natural science research on information technology. Decision Support Systems, 15(4), 251–266. https://doi.org/https://doi.org/10.1016/0167-9236(94)00041-2
- Marshall, R., Case, K., Porter, M., Summerskill, S., Gyi, D., Davis, P., & Sims, R. (2010). HADRIAN: A virtual approach to design for all. Journal of Engineering Design, 21(2–3), 253–273. https://doi.org/https://doi.org/10.1080/09544820903317019
- McAtamney, L., & Nigel Corlett, E. (1993). RULA: A survey method for the investigation of work-related upper limb disorders. Applied Ergonomics, 24(2), 91–99. https://doi.org/https://doi.org/10.1016/0003-6870(93)90080-S
- Oppelt, M., & Urbas, L. (2014). Integrated virtual commissioning an essential activity in the automation engineering process: From virtual commissioning to simulation supported engineering [Paper presentation]. IECON 2014 – 40th Annual Conference of the IEEE Industrial Electronics Society (pp. 2564–2570). https://doi.org/https://doi.org/10.1109/IECON.2014.7048867
- Ore, F., Vemula, B. R., Hanson, L., & Wiktorsson, M. (2016). Human–industrial robot collaboration: Application of simulation software for workstation optimisation. Procedia CIRP, 44, 181–186. https://doi.org/https://doi.org/10.1016/j.procir.2016.02.002
- Raschke, U., & Cort, C. (2019). Siemens Jack. In S. Scataglini & G. Paul (Eds.), DHM and posturography (pp. 35–48). Academic Press. https://doi.org/https://doi.org/10.1016/B978-0-12-816713-7.00003-9
- Reed, M. P., Faraway, J., Chaffin, D. B., & Martin, B. J. (2006). The HUMOSIM ergonomics framework: A new approach to digital human simulation for ergonomic analysis (SAE Technical Paper No. 2006-01–2365). SAE International, https://doi.org/https://doi.org/10.4271/2006-01-2365
- Sana, S. S., Ospina-Mateus, H., Arrieta, F. G., & Chedid, J. A. (2019). Application of genetic algorithm to job scheduling under ergonomic constraints in manufacturing industry. Journal of Ambient Intelligence and Humanized Computing, 10(5), 2063–2090. https://doi.org/https://doi.org/10.1007/s12652-018-0814-3
- Scataglini, S., & Paul, G. (2019). DHM and posturography. Elsevier Academic.
- Vavasis, S. A. (2009). Complexity theory. In C. A. Floudas & P. Pardalos (Eds.), Encyclopedia of optimization (2nd ed.). Springer US. https://www.springer.com/gp/book/9780387747583
- Village, J., Greig, M., Zolfaghari, S., Salustri, F., & Neumann, W. P. (2014). Adapting engineering design tools to include human factors. IIE Transactions on Occupational Ergonomics and Human Factors, 2(1), 1–14. https://doi.org/https://doi.org/10.1080/21577323.2014.905884
- Vink, P., Koningsveld, E. A. P., & Molenbroek, J. F. (2006). Positive outcomes of participatory ergonomics in terms of greater comfort and higher productivity. Applied Ergonomics, 37(4), 537–546. https://doi.org/https://doi.org/10.1016/j.apergo.2006.04.012
- Wang, Q., & Chatwin, C. R. (2005). Key issues and developments in modelling and simulation-based methodologies for manufacturing systems analysis, design and performance evaluation. The International Journal of Advanced Manufacturing Technology, 25(11–12), 1254–1265. https://doi.org/https://doi.org/10.1007/s00170-003-1957-7
- Waters, T. R., Putz-Anderson, V., Garg, A., & Fine, L. J. (1993). Revised NIOSH equation for design and evaluation for manual lifting tasks. Ergonomics, 36(7), 749–776.
- Widana, I. K., Sumetri, N. W., & Sutapa, I. K. (2018). Ergonomic work station design to improve workload quality and productivity of the craftsmen. Journal of Physics: Conference Series, 953(1), 012091. https://doi.org/https://doi.org/10.1088/1742-6596/953/1/012091