References
- Kumar, S.; Panda, A. K.; Singh, R. K. Review A Review on Tertiary Recycling of High-density Polyethylene to Fuel. Resour. Conserv. Recycl. 2011, 55, 893–910. DOI: 10.1016/j.resconrec.2011.05.005.
- Aremo, B.; Adeoye, M. O. Development of a Roofing Material from Polyethylene through the Use of Additives. J. Mater. Civil Eng. 2008, 20, 516–520. DOI: 10.1061/(ASCE)0899-1561(2008)20:8(516).
- Bolduc, S.; Jung, K.; Venkata, P.; Ashokcline, M.; Jayasinghe, R.; Baillie, C.; Lessard, L. Banana Fiber/low-density Polyethylene Recycled Composites for Third World Eco-friendly Construction Applications – Waste for Life Project Sri Lanka. J. Reinf. Plast. Compos. 2018, 37, 1322–1331. DOI: 10.1177/0731684418791756.
- Navarro, F. J.; Partal, P.; Martinez-Boza, F. J.; Gallegos, C. Novel Recycled Polyethylene/ground Tire Rubber/bitumen Blends for Use in Roofing Applications: Thermo-mechanical Properties. Polym. Test. 2010, 29, 588–595. DOI: 10.1016/j.polymertesting.2010.03.010.
- Hahladakis, J. N.; Iacovidou, E. An Overview of the Challenges and Trade-offs in Closing the Loop of Post-consumer Plastic Waste (PCPW): Focus on Recycling. J. Hazard. Mater. 2019, 380, 120887. DOI: 10.1016/j.jhazmat.2019.120887.
- Arjmandi, R.; Hass, A.; Majeed, K.; Zakaria, Z. Review Article Rice Husk Filled Polymer Composites. Int. J. Polym. Sci. 2015, 2015, 32. Article ID 501471. DOI: 10.1155/2015/501471.
- Ogah, A. O. Characterization of Sorghum Bran/recycled Low Density Polyethylene for the Manufacturing of Polymer Composites. J. Polym. Environ. 2017, 25, 533–543. DOI: 10.1007/s10924-016-0830-3.
- Karakus, K.; Birbilen, Y.; Mengelog˘lu, F. Assessment of Selected Properties of LDPE Composites Reinforced with Sugar Beet Pulp. Measurement. 2016, 88, 137–146. DOI: 10.1016/j.measurement.2016.03.039.
- Mohamed, R. M.; Mohamed, M. A.; Shaltout, N. A. Improving the Mechanical Properties of Ethylene Propylenediene Monomer Rubber/low Density Polyethylene/rice Husk Biocomposites by Using Various Additives of Filler and Gamma Irradiation. J. Vinyl Addit. Technol. 2019, 296-302. DOI: 10.1002/vnl.21694.
- ASTM D638. Standard Test for Tensile Properties of Plastics; ASTM International: West Conshohocken, PA, USA, 2010.