References
- Killi, S. Additive Manufacturing: Design, Methods, and Processes; Pan Stanford Publishing: Singapore, 2017.
- Xinchang, Z.; Frank, L. Chapter 1. Introduction to Additive Manufacturing. In Additive Manufacturing;; Pou, J., Riveiro, A., Davim, J. P., Eds.; USA: Elsevier, 2021; pp 1–31.
- Özsoy, K.; Duman, B.; Gültekin, D. İ. Metal Part Production with Additive Manufacturing for Aerospace and Defense Industry. Int. J. Tech. Sci. 2019, 11, 201–210.
- Badiru, A. B.; Valencia, V. V.; Liu, D. Additive Manufacturing Handbook: Product Development for the Defense Industry; CRC Press: Boca Raton, FL, 2017.
- Zhuang, T.; Li, X.; Deng, Q.; Zhao, W.; Lin, B.; Luo, Y.; Zhang, X. A GelMA/DECM/nanoclay Composite Biomaterial Ink for Printing 3D Scaffolds for Primary Hepatocytes Cultivation. Mater. Lett. 2020, 274, 128034. DOI: https://doi.org/10.1016/j.matlet.2020.128034.
- Wang, Y.; Ma, M.; Zhang, L.; Gao, Y.; Zhang, B.; Guo, Y. Fabrication of Bi-layer Photocrosslinked GelMA/PEGDA Fibrous Membrane for Guided Bone Regeneration Materials. Mater. Lett. 2019, 249, 112–115. DOI: https://doi.org/10.1016/j.matlet.2019.04.076.
- Elomaa, L.; Keshi, E.; Sauer, I. M.; Weinhart, M. Development of GelMA/PCL and dECM/PCL Resins for 3D Printing of Acellular in Vitro Tissue Scaffolds by Stereolithography. Mater. Sci. Eng. C. 2020, 112, 110958. DOI: https://doi.org/10.1016/j.msec.2020.110958.
- Lyons, B. Additive Manufacturing in Aerospace: Examples and Research Outlook. The Bridge. 2014, 44(3), 13–19.
- Zhao, T.; Li, X.; Yu, R.; Zhang, Y.; Yang, X.; Zhao, X.; Wang, L.; Huang, W. Silicone–epoxy‐based Hybrid Photopolymers for 3D Printing. Macromol. Chem. Phys. 2018, 219(10), 1700530. DOI: https://doi.org/10.1002/macp.201700530.
- Lee, I. H.; Kim, H.-C.; Ahn, D.-G. Korean Terminologies for Additive Manufacturing according to the ISO/ASTM 52900 Standard. J. Korean Soc. Precis. Eng. 2020, 37(12), 929–936. DOI: https://doi.org/10.7736/JKSPE.020.093.
- Bachmann, J.; Obst, P.; Knorr, L.; Schmölzer, S.; Fruhmann, G.; Witt, G.; Osswald, T.; Wudy, K.; Hinrichsen, O. Cavity Vat Photopolymerisation for Additive Manufacturing of Polymer-composite 3D Objects. Commun. Mater. 2021, 2(1), 1–9. DOI: https://doi.org/10.1038/s43246-021-00211-5.
- Trofimov, A.; Le-Pavic, J.; Ravey, C.; Albouy, W.; Therriault, D.; Levesque, M. Multi-scale Modeling of Distortion in the Non-flat 3D Woven Composite Part Manufactured Using Resin Transfer Molding. Compos. Part A Appl. Sci. 2021, 140, 106145. doi:https://doi.org/10.1016/j.compositesa.2020.106145
- Martínez-García, A.; Monzón, M.; Paz, R. Chapter 12: Standards for Additive Manufacturing Technologies: Structure and Impact. In Additive Manufacturing;; Pou, J., Riveiro, A., Davim, J. P., Eds.; USA: Elsevier, 2021; pp 395–408.
- Alexander, A. E.; Wake, N.; Chepelev, L.; Brantner, P.; Ryan, J.; Wang, K. C. A Guideline for 3D Printing Terminology in Biomedical Research Utilizing ISO/ASTM Standards. 3D Print. Med. 2021, 7(1), 1–6. DOI: https://doi.org/10.1186/s41205-021-00098-5.
- Borrello, J.; Nasser, P.; Iatridis, J. C.; Costa, K. D. 3D Printing a Mechanically-tunable Acrylate Resin on a Commercial DLP-SLA Printer. Addit. Manuf. 2018, 23, 374–380. DOI: https://doi.org/10.1016/j.addma.2018.08.019.
- Mubarak, S.; Dhamodharan, D.; Kale, B.; Divakaran, M.; Senthil, N.; T, W.; Wang, L.; Wang,; J, J. A Novel Approach to Enhance Mechanical and Thermal Properties of SLA 3D Printed Structure by Incorporation of Metal–metal Oxide Nanoparticles. Nanomaterials. 2020, 10(2), 217. DOI: https://doi.org/10.3390/nano10020217.
- Shah, S.; Megat-Yusoff, P.; Karuppanan, S.; Choudhry, R.; Ahmad, F.; Sajid, Z.; Gerard, P.; Sharp, K. Performance Comparison of Resin-infused Thermoplastic and Thermoset 3D Fabric Composites under Impact Loading. Int. J. Mech. Sci. 2021, 189, 105984. DOI: https://doi.org/10.1016/j.ijmecsci.2020.105984.
- Blokhin, A.; Dyachkova, T.; Maksimkin, A.; Stolyarov, R.; Suhorukov, A.; Burmistrov, I.; Kharitonov, A. Polymer Composites Based on Epoxy Resin with Added Carbon Nanotubes. Fuller. Nanotub. Carbon Nanostructures. 2020, 28(1), 45–49. DOI: https://doi.org/10.1080/1536383X.2019.1671364.
- Quan, D.; Alderliesten, R.; Dransfeld, C.; Tsakoniatis, I.; Benedictus, R. Co-cure Joining of Epoxy Composites with Rapidly UV-irradiated PEEK and PPS Composites to Achieve High Structural Integrity. Compos. Struct. 2020, 251, 112595. DOI: https://doi.org/10.1016/j.compstruct.2020.112595.
- Zhang, Y.; Yin, M.-J.; Ouyang, X.; Zhang, A. P.; Tam, H.-Y. 3D μ-printing of Polytetrafluoroethylene Microstructures: A Route to Superhydrophobic Surfaces and Devices. Appl. Mater. Today. 2020, 19, 100580. DOI: https://doi.org/10.1016/j.apmt.2020.100580.
- Rocheva, V. V.; Koroleva, A. V.; Savelyev, A. G.; Khaydukov, K. V.; Generalova, A. N.; Nechaev, A. V.; Guller, A. E.; Semchishen, V. A.; Chichkov, B. N.; Khaydukov, E. V. High-resolution 3D Photopolymerization Assisted by Upconversion Nanoparticles for Rapid Prototyping Applications. Sci. Rep. 2018, 8(1), 1–10. DOI: https://doi.org/10.1038/s41598-018-21793-0.
- Liska, R.; Schuster, M.; Inführ, R.; Turecek, C.; Fritscher, C.; Seidl, B.; Schmidt, V.; Kuna, L.; Haase, A.; Varga, F. Photopolymers for Rapid Prototyping. J. Coat. Technol. Res. 2007, 4(4), 505–510. DOI: https://doi.org/10.1007/s11998-007-9059-3.
- Karalekas, D. Study of the Mechanical Properties of Nonwoven Fibre Mat Reinforced Photopolymers Used in Rapid Prototyping. Mater. Des. 2003, 24(8), 665–670. DOI: https://doi.org/10.1016/S0261-3069(03)00153-5.
- Basavarajappa, S.; Joshi, A. G.; Arun, K.; Kumar, A. P.; Kumar, M. P. Three-body Abrasive Wear Behaviour of Polymer Matrix Composites Filled with SiC Particles. Polym.-Plast. Technol. Eng. 2009, 49(1), 8–12. DOI: https://doi.org/10.1080/03602550903206407.
- Turan, M. E.; Sun, Y.; Akgul, Y.; Turen, Y.; Ahlatci, H. The Effect of GNPs on Wear and Corrosion Behaviors of Pure Magnesium. J. Alloys Compd. 2017, 724, 14–23. DOI: https://doi.org/10.1016/j.jallcom.2017.07.022.
- Yuan, J.-K.; Li, W.-L.; Yao, S.-H.; Lin, Y.-Q.; Sylvestre, A.; Bai, J. High Dielectric Permittivity and Low Percolation Threshold in Polymer Composites Based on SiC-carbon Nanotubes Micro/nano Hybrid. Appl. Phys. 2011, 98, 032901. DOI: https://doi.org/10.1063/1.3544942.
- Mutlay, İ.; Tudoran, L. B. Percolation Behavior of Electrically Conductive Graphene Nanoplatelets/polymer Nanocomposites: Theory and Experiment. Fullerenes Nanotubes and Carbon Nanostruct. 2014, 22(5), 413–433. DOI: https://doi.org/10.1080/1536383X.2012.684186.
- Huang, Y.; Hu, X.; Qian, Y.; Huang, S.; Li, D. Improved Photodegradation Performance of Zinc Oxide/carbon Nanotubes/reduced Graphene Oxide Composites. Fullerenes Nanotubes and Carbon Nanostruct. 2019, 27(8), 619–625. DOI: https://doi.org/10.1080/1536383X.2019.1623790.
- Qian, Y.; Zhao, X.; Han, Q.; Chen, W.; Li, H.; Yuan, W. An Integrated Multi-layer 3D-fabrication of PDA/RGD Coated Graphene Loaded PCL Nanoscaffold for Peripheral Nerve Restoration. Nat. Commun. 2018, 9(1), 1–16. DOI: https://doi.org/10.1038/s41467-017-02598-7.
- Nguong, C.; Lee, S.; Sujan, D. A Review on Natural Fibre Reinforced Polymer Composites. Int. J. Mater. Eng. 2013, 7, 52–59. DOI: https://doi.org/10.5281/zenodo.1332600.
- Standard. ISO 527-1. Plastics-determination of Tensile Properties, Part 1: General Principles; ISO-Committee: Geneva, Switzerland, 1993.
- Standard. ISO 179-1. Plastics—Determination of Charpy Impact Properties; ISO-Committee: Geneva, Switzerland, 2010.
- Standard. ISO 6721-1. Plastics–Determination of Dynamic Mechanical Properties–Part 1: General Principles; ISO-Committee: Geneva, Switzerland, 2011.
- Novakova-Marcincinova, L.; Novak-Marcincin, J. Testing of ABS Material Tensile Strength for Fused Deposition Modeling Rapid Prototyping Method. Adv. Mat. Res. 2014, 912, 370–373. DOI: https://doi.org/10.4028/scientific.net/AMR.912-914.370.
- Pawar, A. A.; Saada, G.; Cooperstein, I.; Larush, L.; Jackman, J. A.; Tabaei, S. R.; Cho, N.-J.; Magdassi, S. High-performance 3D Printing of Hydrogels by Water-dispersible Photoinitiator Nanoparticles. Science Advances. 2016, 2(4), e1501381. DOI: https://doi.org/10.1126/sciadv.1501381.
- Wang, J.; Stanic, S.; Altun, A. A.; Schwentenwein, M.; Dietliker, K.; Jin, L.; Stampfl, J.; Baudis, S.; Liska, R.; Grützmacher, H. A Highly Efficient Waterborne Photoinitiator for Visible-light-induced Three-dimensional Printing of Hydrogels. Chem. Commun. 2018, 54(8), 920–923. DOI: https://doi.org/10.1039/C7CC09313F.
- Neumann, M. G.; Schmitt, C. C.; Horn, M. A., Jr. The Effect of the Mixtures of Photoinitiators in Polymerization Efficiencies. J. Appl. Polym. Sci. 2009, 112(1), 129–134. DOI: https://doi.org/10.1002/app.28949.
- Kuang, X.; Zhao, Z.; Chen, K.; Fang, D.; Kang, G.; Qi, H. J. High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing. Macromol. Rapid Commun. 2018, 39(7), 1700809. DOI: https://doi.org/10.1002/marc.201700809.
- Jackson, M.; Kaushik, M.; Nazarenko, S.; Ward, S.; Maskell, R.; Wiggins, J. Effect of Free Volume Hole-size on Fluid Ingress of Glassy Epoxy Networks. Polymer. 2011, 52(20), 4528–4535. DOI: https://doi.org/10.1016/j.polymer.2011.07.042.
- Chang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Hsieh, K.-H. Fabrication of Polymer Microlens Arrays Using Capillary Forming with a Soft Mold of Micro-holes Array and UV-curable Polymer. Opt. Express. 2006, 14(13), 6253–6258. DOI: https://doi.org/10.1364/OE.14.006253.
- Feng, Z.; Li, Y.; Hao, L.; Yang, Y.; Tang, T.; Tang, D.; Xiong, W. Graphene-reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds. J. Nanomater. 2019, 2019, 1–13. DOI: https://doi.org/10.1155/2019/9710264.
- Ferry, L.; Vigier, G.; Alexander-Katz, R.; Garapon, C. Interaction between UV Radiation and Filled Polytetrafluoroethylene (PTFE). I. Degradation Processes. J Polym Sci Part B. 1998, 36(12), 2057–2067. DOI: https://doi.org/10.1002/(SICI)1099-0488(19980915)36:12<2057::AID-POLB5>3.0.CO;2-U.
- Tsai, B. K.; Cooksey, C. C.; Allen, D. W.; White, C. C.; Byrd, E.; Jacobs, D. Exposure Study on UV-induced Degradation of PTFE and Ceramic Optical Diffusers. Appl. Opt. 2019, 58(5), 1215–1222. DOI: https://doi.org/10.1364/AO.58.001215.
- Xia, C.; Asl, M. S.; Namini, A. S.; Ahmadi, Z.; Delbari, S. A.; Van Le, Q.; Shokouhimehr, M.; Mohammadi, M. Enhanced Fracture Toughness of ZrB2–SiCw Ceramics with Graphene Nano-platelets. Ceram. 2020, 46, 24906–24915. DOI: https://doi.org/10.1016/j.ceramint.2020.06.275.
- Wang, F.; Drzal, L. T.; Qin, Y.; Huang, Z. Enhancement of Fracture Toughness, Mechanical and Thermal Properties of Rubber/epoxy Composites by Incorporation of Graphene Nanoplatelets. Compos. Part A Appl. Sci. 2016, 87, 10–22. doi:https://doi.org/10.1016/j.compositesa.2016.04.009
- Chatterjee, S.; Wang, J.; Kuo, W.; Tai, N.; Salzmann, C.; Li, W.; Hollertz, R.; Nüesch, F.; Chu, B. Mechanical Reinforcement and Thermal Conductivity in Expanded Graphene Nanoplatelets Reinforced Epoxy Composites. Chem. Phys. Lett. 2012, 531, 6–10. DOI: https://doi.org/10.1016/j.cplett.2012.02.006.
- Kausar, A.; Anwar, Z.; Khan, L. A.; Muhammad, B. Functional Graphene Nanoplatelet Reinforced Epoxy Resin and Polystyrene-based Block Copolymer Nanocomposite. Fullerenes Nanotubes and Carbon Nanostruct. 2017, 25(1), 47–57. DOI: https://doi.org/10.1080/1536383X.2016.1251418.
- Mubarak, S.; Dhamodharan, D.; Divakaran, N.; Kale, M. B.; Senthil, T.; Wu, L.; Wang, J. Enhanced Mechanical and Thermal Properties of Stereolithography 3d Printed Structures by the Effects of Incorporated Controllably Annealed Anatase TiO2 Nanoparticles. Nanomaterials. 2020, 10(1), 79. DOI: https://doi.org/10.3390/nano10010079.
- Kalsoom, U.; Nesterenko, P. N.; Paull, B. Recent Developments in 3D Printable Composite Materials. RSC Adv. 2016, 6(65), 60355–60371. DOI: https://doi.org/10.1039/C6RA11334F.
- Malas, M.; Isakov, I.; Couling, C.; Gibbons, G. J. Fabrication of High Permittivity Resin Composite for Vat Photopolymerization 3D Printing: Morphology, Thermal, Dynamic Mechanical and Dielectric Properties. Materials. 2019, 12(23), 3818. DOI: https://doi.org/10.3390/ma12233818.
- Tai, C.; Li, R. K. Y. Studies on the Impact Fracture Behaviour of Flame Retardant Polymeric Material. Mater. Des. 2001, 22(1), 15–19. DOI: https://doi.org/10.1016/S0261-3069(00)00029-7.
- Roberson, D. A.; Perez, A. R. T.; Shemelya, C. M.; Rivera, A.; MacDonald, E.; Wicker, R. B. Comparison of Stress Concentrator Fabrication for 3D Printed Polymeric Izod Impact Test Specimens. Addit. Manuf. 2015, 7, 1–11. DOI: https://doi.org/10.1016/j.addma.2015.05.002.
- Vega, V.; Clements, J.; Lam, T.; Abad, A.; Fritz, B.; Ula, N.; Es-Said, O. S. The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer. J. Mater. Eng. Perform. 2011, 20(6), 978–988. DOI: https://doi.org/10.1007/s11665-010-9740-z.
- Strabala, K. W. The Effects of Combined Compression and Aging on the Properties of Glassy Polycarbonate; Degree of Master of Science, University of Nebraska-Lincoln: USA, 2009.
- Erdmann, M.; Niebergall, U.; Wachtendorf, V.; Böhning, M. Evaluation of UV-induced Embrittlement of PE-HD by Charpy Impact Test. J. Appl. Polym. Sci. 2020, 137(36), 49069. DOI: https://doi.org/10.1002/app.49069.
- Channell, A.; Clutton, E.; Capaccio, G. Phase Segregation and Impact Toughness in Linear Low Density Polyethylene. Polymer. 1994, 35(18), 3893–3898. DOI: https://doi.org/10.1016/0032-3861(94)90272-0.